Strut replacement typically costs between $400 and $1,200 per axle at a shop, depending on your vehicle, the brand of strut, and your location.
That range covers both parts and labor. A single strut assembly (the shock absorber, spring, and mounting hardware combined) runs $150 to $400 from the parts supplier. Labor to remove the old one and install the new one takes one to two hours per side, which means $150 to $400 in shop time depending on the hourly rate in your area. Some vehicles — particularly those with electronic suspension or complex steering geometry — cost more because the work takes longer or requires a wheel alignment afterward.
Most vehicles need struts replaced on both sides of an axle at the same time. If only one side is worn, shops will usually recommend doing both the front or both the rear together, because a new strut on one side and an old one on the other creates uneven handling and uneven tire wear. That means you are typically looking at the cost for two struts, not one.
Key Takeaways
- Strut replacement costs $400 to $1,200 per axle (both sides) at a shop, with the range depending on your vehicle make and model, the strut brand you choose, and local labor rates.
- Most shops recommend replacing struts on both sides of an axle at the same time, even if only one is visibly worn, to keep handling balanced and tire wear even.
- A wheel alignment after strut replacement costs $75 to $200 and is often necessary because the work changes your vehicle's suspension geometry.
- Independent shops typically charge less than dealerships for the same work, though some vehicles require dealership service for electronic suspension components.
- Struts usually last 50,000 to 100,000 miles, but wear faster on rough roads, in cold climates, or if you regularly carry heavy loads.
What the parts themselves cost
A single strut assembly from an aftermarket supplier costs $150 to $400. The price depends on the vehicle and the brand. A basic strut for a Honda Civic runs less than a strut for a BMW or a truck, because the engineering is simpler and the volume is higher. OEM struts (the ones made by your vehicle's manufacturer) cost more than aftermarket equivalents — sometimes 50 percent more — but they fit without modification and carry the manufacturer's warranty.
Budget brands like Monroe or KYB cost less upfront but may not last as long as premium brands like Bilstein or Sachs. Some shops will let you choose the brand; others have a house brand they install on most vehicles. Ask what brand they use and what warranty comes with it before you commit to the work.
Labor costs vary by shop type and location
An independent repair shop in a rural area might charge $80 to $120 per hour. The same work at a dealership in a city can run $150 to $250 per hour. A national chain like Firestone or Midas typically falls in the middle. One strut takes one to two hours to remove and install, so labor alone ranges from $80 to $500 depending on where you go and how complex your vehicle is.
Some vehicles require a wheel alignment after strut replacement because the work changes the angle of the wheels relative to the frame. An alignment costs $75 to $200 and is worth doing — misaligned wheels wear tires faster and make the vehicle pull to one side. Ask the shop whether your vehicle needs an alignment before they start the work.
When dealerships cost more than independent shops
Dealerships charge higher hourly rates than independent shops, but for some vehicles they are the only option. If your vehicle has electronic suspension (air springs, adaptive dampers, or computer-controlled height adjustment), the dealership may be the only shop with the diagnostic equipment and software to do the work correctly. Some luxury vehicles also require dealership service for suspension work because the parts are proprietary or the installation procedure is complex.
Before you assume a dealership is necessary, call an independent shop that specializes in your vehicle brand. Many independent shops have invested in the same diagnostic tools and can do the work for less. If they cannot, they will tell you upfront rather than guess and damage your suspension.
Signs that struts need replacement
Struts wear gradually, so the first sign is often a change in how the vehicle feels rather than a noise or a visible leak. The front end may bounce more after you hit a bump, or the vehicle may feel less stable when you turn at highway speed. The steering wheel might feel looser or less responsive. Some vehicles will develop a clunking sound from the front suspension, especially over rough roads.
A visual inspection can confirm wear. Look at the strut itself (the metal cylinder mounted inside the wheel well, connected to the spring). If you see oil leaking down the side, the seal has failed and the strut is no longer damping suspension movement properly. A strut that is leaking will not pass a safety inspection in most states and should be replaced soon.
How long struts typically last
Most struts last 50,000 to 100,000 miles. The exact lifespan depends on your driving conditions. If you drive mostly on smooth highways, your struts may last toward the upper end. If you drive on rough roads, live in a cold climate where salt corrodes the seals, or regularly carry heavy loads, they may wear out faster. Towing also accelerates strut wear because the extra weight increases the load on the suspension.
Some vehicles are known for struts that wear faster than average. Check your vehicle's service history or ask a shop that works on your model — they will know whether yours is one of them. If it is, budget for replacement sooner rather than later.
Doing the work yourself versus paying a shop
Strut replacement is possible as a DIY project if you have basic mechanical skill and the right tools, but it is not a beginner job. You need a spring compressor (a tool that costs $30 to $100 to buy or rent), a jack and jack stands, and a way to remove the old spring from the strut. The process involves compressing the spring under tension, which is dangerous if done wrong — a spring that slips can cause serious injury.
If you have done suspension work before and have the tools, DIY saves you the labor cost (one to two hours of shop time). If you have not, the risk of damaging the suspension or injuring yourself is high enough that paying a shop is the safer choice. A shop also warranties the work, so if something goes wrong, they fix it at no cost.
Frequently Asked Questions
Can I replace just one strut instead of two?
Technically yes, but shops recommend against it. A new strut on one side and a worn one on the other creates uneven suspension stiffness, which makes the vehicle handle unpredictably and wears tires unevenly. If only one strut is leaking, the other is usually close behind. Replacing both at the same time costs more upfront but prevents a second repair soon after.
Do I need an alignment after strut replacement?
It depends on your vehicle. Some vehicles change wheel angle significantly when struts are replaced; others do not. Ask the shop before they start the work. If they say yes, budget an extra $75 to $200. If you skip the alignment when it is needed, your tires will wear faster and the vehicle may pull to one side.
What is the difference between a strut and a shock absorber?
A strut combines the shock absorber, spring, and mounting hardware into one assembly. A shock absorber is just the damping part. Most modern vehicles use struts on the front axle because they save space and weight. Some vehicles use shocks on the rear. Struts are more expensive to replace because you are replacing the whole assembly, not just the damper.
Will my vehicle fail inspection if the struts are worn?
If the strut is leaking oil or the suspension is visibly damaged, yes — most states will fail the vehicle. If the strut is worn but not leaking, it depends on your state's inspection standards. Some states check for excessive bounce or movement; others do not. Check your state's inspection requirements or ask a shop that does inspections in your area.
How much does it cost to replace struts on a truck versus a car?
Trucks typically cost more because the struts are larger and the labor is more involved. A truck strut assembly can cost $200 to $500 per side, compared to $150 to $300 for a car. Labor is also longer on some trucks because of the suspension geometry. Expect to pay 20 to 40 percent more for a truck than for a comparable car.