Wheel hub assembly replacement typically costs between $300 and $1,000 per wheel, depending on your vehicle, which part fails, and whether you go to a dealership or independent shop.
A wheel hub assembly is the component that connects your wheel to the suspension and allows it to spin freely. It contains the bearing, the mounting surface for your brake rotor, and the sensor that feeds information to your anti-lock brake system. When it fails, your wheel can wobble, your brakes may not work properly, or your vehicle may pull to one side.
The total bill depends on four things: the make and model of your vehicle, whether you need one hub or multiple hubs replaced, the labor rate at your shop, and whether the hub is integrated into the steering knuckle (which costs more to replace because you're replacing a larger assembly). A single hub at an independent shop might run $400 to $600. The same job at a dealership could be $700 to $1,200. If you need both front hubs, you're looking at $800 to $2,400 total.
Key Takeaways
- A wheel hub assembly replacement costs $300 to $1,000 per wheel, with dealerships charging more than independent shops for the same work.
- Labor makes up roughly half the cost; the part itself ranges from $150 to $400 depending on whether it's a pressed bearing or an integrated assembly.
- Symptoms of a failing hub include a grinding or humming noise from the wheel, steering wheel vibration, or a pulsing brake pedal.
- Getting quotes from at least two shops before committing will show you the price range for your specific vehicle and help you avoid overpaying.
- Some shops can press a new bearing into your existing hub for $200 to $400, which is cheaper than replacing the entire assembly if the hub itself is still good.
What's included in the hub assembly replacement cost
The part itself usually costs $150 to $400, depending on whether you're buying an OEM (original equipment manufacturer) part from the dealership or an aftermarket part from an independent supplier. OEM parts are more expensive but carry a warranty and are may provide to fit. Aftermarket parts are cheaper and often just as reliable, but quality varies by brand.
Labor typically runs $150 to $300 per hub, depending on how difficult the job is on your vehicle. Some hubs are bolted on and take an hour. Others are pressed onto the axle shaft and require a hydraulic press, which takes longer and may require removing the entire suspension component. A few vehicles have hubs integrated into the steering knuckle, which means replacing the hub means replacing the knuckle too—that can double the labor cost.
Some shops will also charge a disposal fee ($10 to $25) for the old hub and may charge extra if they need to replace the wheel bearing separately or if the axle shaft is damaged during removal.
Dealership versus independent shop pricing
Dealerships charge more for the same work because they use OEM parts, have higher overhead, and their technicians are factory-trained. You'll typically pay 30 to 50 percent more at a dealership than at an independent shop. A $500 job at an independent shop might be $700 to $750 at the dealership.
Independent shops often use aftermarket parts and have lower labor rates, which is why they're cheaper. The trade-off is that you may not get the same warranty on the part, and the technician's experience with your specific vehicle model may vary. A good independent shop will have done hundreds of hub replacements and will know the common problems and fastest approach for your car.
Chains like Firestone, Midas, and Pep Boys fall between dealerships and small independent shops in price. They use a mix of OEM and quality aftermarket parts and have standardized labor rates. Get quotes from all three types before deciding.
Signs your wheel hub assembly is failing
A grinding or humming noise that gets louder as you speed up is the most common sign. The noise comes from the bearing inside the hub wearing out. It usually gets worse over days or weeks, not overnight. If you hear it from one wheel, that's the one that needs replacement.
Steering wheel vibration, especially at highway speeds, often points to a bad hub. The vibration may come and go depending on how much weight is on that wheel. Turning the wheel hard in one direction sometimes makes the vibration worse because it shifts the load onto the bad bearing.
A pulsing brake pedal can mean a bad hub, because the hub is what the brake rotor bolts to. If the hub is worn, the rotor can wobble slightly, which makes the brake pedal pulse when you stop. This is different from ABS pulsing, which happens in short bursts during emergency braking.
Your vehicle may also pull to one side if a hub is failing, because the wheel isn't tracking straight. Have a technician inspect the hub if you notice any of these signs, because a completely failed hub can cause the wheel to lock up or even separate while driving.
How to get an accurate quote for your vehicle
Call or visit three shops—one dealership, one independent shop, and one chain—and give them your vehicle's year, make, model, and mileage. Tell them which wheel is making noise or showing symptoms. Ask for a written quote that includes the part cost, labor cost, and any other fees.
Ask whether they're using OEM or aftermarket parts and what warranty comes with the part. Ask how long the job takes and whether they can do it the same day or if you'll need to leave the vehicle overnight. Ask if they've seen any common problems with your vehicle's hubs.
Don't automatically choose the cheapest quote. A shop that's $100 cheaper but has poor reviews or won't stand behind their work may cost you more in the long run if the hub fails again in six months. Read reviews on Google and Yelp for each shop before deciding.
Pressed bearing versus full hub assembly replacement
Some hubs have a bearing that can be pressed out and replaced separately, while others have the bearing permanently bonded to the hub. If your hub is the type with a replaceable bearing, a shop can press out the old bearing and press in a new one for $200 to $400, which is cheaper than buying a whole new hub assembly.
The catch is that the technician has to inspect the hub to see if it's still good. If the hub itself is cracked, bent, or worn, pressing a new bearing into it won't solve the problem—you'll need a full replacement. Most shops will tell you during the inspection whether a bearing press is an option for your vehicle.
Ask your shop whether a bearing press is possible before they start work. If it is, ask them to quote both options—the bearing press and the full assembly—so you can see the savings.
Warranty and what to expect after replacement
Most shops offer a 12-month or 12,000-mile warranty on the part and labor. Dealerships often offer longer warranties, sometimes 24 months or 24,000 miles. Read the warranty paperwork to see what's covered—some warranties cover only the part, not the labor if something goes wrong.
After replacement, the noise should be gone when ready and the steering should feel smoother. If the noise comes back within a few weeks, take the vehicle back to the shop that did the work. If the replacement was done correctly, a new hub should last 100,000 miles or more.
Keep your receipt and warranty paperwork. If you sell the vehicle, the warranty may transfer to the new owner, which can add value to the sale.
Frequently Asked Questions
Can I drive on a bad wheel hub assembly?
You can drive short distances, but it's not safe for highway speeds or long trips. A failing hub can cause the wheel to lock up, wobble, or separate. If you hear grinding noise or feel steering vibration, have the hub inspected within a few days and get it replaced before the problem gets worse.
Why is the hub assembly so expensive?
The hub contains precision bearings and is integrated into your suspension and brake system. It has to be manufactured to tight tolerances and balanced perfectly. Labor is also high because removing and installing it often requires removing other suspension parts and using specialized tools like a hydraulic press.
Do I need to replace both front hubs at the same time?
Not necessarily. Replace only the hub that's failing. However, if both hubs are old and one is failing, ask your technician whether the other one is showing signs of wear. If both are near the end of their life, replacing both at once saves you labor costs because the shop doesn't have to remove the suspension twice.
What's the difference between a hub assembly and a wheel bearing?
A wheel bearing is the rolling element inside the hub that lets the wheel spin. A hub assembly is the complete unit that includes the bearing, the hub itself, and sometimes the sensor for your anti-lock brakes. Most modern vehicles use sealed hub assemblies where the bearing can't be serviced separately.
Will my check engine light come on if the hub is bad?
Yes, if the hub has an integrated wheel speed sensor for your anti-lock brake system. A failing sensor will trigger a warning light on your dashboard. The light doesn't always mean the hub is bad—it could be a wiring problem—but it's a sign to have the system inspected.