Park information is a parking aid system that steers your car into a space while you control the pedals

Park information (also called automated parking or self-parking) is a feature that uses sensors and cameras to find a parking space, calculate the steering angle needed, and automatically turn the wheel while you operate the brake and accelerator. You stay in control of speed; the system handles the wheel. Different manufacturers call it different names — Ford calls it Active Park information, BMW calls it Parking Assistant, and Mercedes calls it Parktronic — but the basic job is the same.

The system works by scanning for spaces as you drive slowly past parked cars. When it finds a gap large enough for your vehicle, it alerts you and asks if you want to use it. If you accept, you shift into Reverse (or Drive, depending on the space orientation), and the system takes over steering while you manage the pedals and watch for obstacles. The whole process usually takes 30 to 60 seconds.

Park information is optional equipment on most vehicles that offer it, not standard. It typically costs between $500 and $1,500 as an add-on, though some manufacturers bundle it with other driver-information packages. Luxury brands and newer model years are more likely to include it as standard.

Key Takeaways

  • Park information steers your vehicle into a parking space automatically while you control the brake and gas pedal.
  • The system uses ultrasonic sensors and cameras to detect available spaces and calculate the steering path needed.
  • You remain responsible for speed control and must stay alert during the entire parking process.
  • Park information works best in parallel parking situations and requires spaces that are at least 1.5 times your vehicle's length.
  • The feature is optional equipment on most cars and may not work reliably in tight urban spaces or with unusual obstacles.

How the sensors detect and measure parking spaces

Park information relies on ultrasonic sensors mounted around the bumpers and sides of your vehicle. As you drive slowly past parked cars at a steady speed (usually 3 to 5 mph), these sensors bounce sound waves off nearby vehicles and curbs to measure the distance and size of gaps. The system continuously maps the space and calculates whether it's large enough for your car to fit.

Most systems require a space that is at least 1.5 times the length of your vehicle. A sedan that is 15 feet long would need a space of at least 22 to 23 feet. The sensors also check for obstacles like fire hydrants, poles, or parked motorcycles that might block the maneuver. If the space is too small or has an obstruction, the system straightforward won't offer to park there.

Some newer systems add camera feeds that show you a bird's-eye view of the parking area on your dashboard screen. This gives you a visual confirmation of what the sensors are detecting and helps you see exactly where the car will move.

What you have to do during the parking process

Once you accept the system's offer to park, your role shifts to managing speed and staying alert. You will hold down the brake or accelerator as the system steers. The steering wheel may move on its own — do not fight it or try to steer manually, as this can confuse the system and cause it to stop the maneuver.

You must watch the dashboard display and your mirrors throughout the process. Park information is designed to avoid parked cars and curbs, but it cannot always detect pedestrians, shopping carts, or other small moving objects. If you see anything in the path, press the brake when ready to stop the maneuver. The system will pause and wait for your next input.

The entire parking sequence usually completes in one or two attempts. If the system cannot fit the car into the space after the first try, it will ask you to reposition and try again. Some vehicles allow you to manually adjust the final position after the automated steering is done.

Limitations and situations where Park information may not work

Park information works best in wide, open parking lots and suburban streets with clear parallel parking spaces. It struggles in tight urban environments where cars are packed closely together, where curbs are irregular, or where there are frequent obstacles like delivery trucks or construction equipment.

The system also has trouble with angled parking spaces, diagonal spaces, or perpendicular (head-in) spaces, depending on the manufacturer. Some newer systems handle perpendicular parking, but most are designed primarily for parallel parking. Check your owner's manual to see which parking orientations your specific system supports.

Weather and sensor cleanliness matter. Heavy rain, snow, or mud can block the ultrasonic sensors and prevent the system from working. Dirt or ice buildup on the bumpers will reduce sensor accuracy. If your sensors are dirty, clean them gently with a soft cloth before relying on Park information.

When Park information stops working or gives an error

If Park information displays an error message or refuses to set up, the most common cause is dirty or blocked sensors. Check the bumpers and sensor areas for mud, snow, ice, or debris. Clean them and try again. If the error persists, the sensors themselves may need recalibration or repair — this is a job for your dealership.

The system may also deactivate if your vehicle's battery voltage is low, if the steering system detects a fault, or if the parking brake is not engaged. Check that your battery is in good condition and that you have engaged the parking brake before attempting to use Park information.

If the system works intermittently — sometimes finding spaces and sometimes not — the sensors may be misaligned or partially damaged. This typically requires a diagnostic scan at a dealership to identify which sensor is failing.

Park information versus other parking features

Park information is different from parking sensors (which beep as you get close to obstacles) and backup cameras (which show you what is behind the car). Those features help you park manually. Park information does the steering for you.

Some vehicles also offer 360-degree camera systems that show a bird's-eye view of your car and the surrounding area. This helps you see where you are in a space but does not steer the vehicle. You still park manually.

A few high-end vehicles now offer fully autonomous parking, where you can exit the car and let it park itself using a smartphone app or key fob. This is different from Park information, which requires you to remain in the driver's seat and control the pedals. Fully autonomous parking is still rare and expensive.

Maintenance and care for Park information sensors

Keep the ultrasonic sensors clean and free of obstruction. After winter driving, wash the bumpers thoroughly to remove salt, sand, and road grime. After driving through mud or heavy rain, wipe down the sensor areas with a damp cloth. Do not use a pressure washer directly on the sensors, as high-pressure water can damage them.

If you have had bumper work done — repair, repainting, or replacement — ask your technician to recalibrate the Park information sensors afterward. Bumper removal and reinstallation can shift the sensor alignment slightly, which reduces accuracy.

Have the system scanned by a dealership if you notice it is not finding spaces it should find, or if it is offering spaces that are clearly too small. A diagnostic scan can identify which sensors are failing and whether recalibration is needed.

Frequently Asked Questions

Can I use Park information in a garage or covered parking structure?

Most Park information systems work in garages and covered structures, but performance may be reduced if the space is very narrow or has low ceilings. Some systems have trouble with metal support columns or walls that are very close to the parking space. Test your system in a safe, empty area first before relying on it in a tight garage.

What happens if I need to take over steering during a Park information maneuver?

You can take over steering at any time by turning the wheel manually or pressing the brake. The system will when ready stop the automated steering and return control to you. After you regain control, you will need to manually complete the parking or restart the Park information sequence.

Does Park information work if my car is in Drive or only in Reverse?

Most systems work in both Reverse and Drive, depending on the space orientation. Parallel spaces along the side of the road typically use Reverse, while some perpendicular spaces may use Drive. Your owner's manual will specify which gears your system supports for different parking types.

Will Park information damage my car if something goes wrong?

Park information is designed to stop if it detects an obstacle, but it is not foolproof. The system may not detect very small objects, pedestrians, or animals. You are responsible for monitoring the maneuver and stopping the car if you see a hazard. Never rely on Park information alone to avoid a collision.

How much does it cost to repair Park information if the sensors fail?

Sensor replacement costs vary widely depending on which sensor failed and your vehicle's make and model. A single sensor replacement typically ranges from $200 to $600, plus labor. Recalibration after bumper work usually costs $100 to $300. Contact your dealership for a specific estimate.