Walmart offers car key copying at most locations, but the service and cost depend on your key type and vehicle year
Walmart's in-store key copying service handles traditional metal car keys and some newer key fobs, though not all locations offer the same range. The service is performed at the store's key-cutting station, usually near the front of the store or in the hardware section. You bring your original key, hand it to the associate, and they cut a duplicate on-site. The process takes a few minutes and costs less than a dealership would charge.
The catch is that Walmart cannot copy or program transponder keys (the kind with a chip inside that communicates with your car's security system) or smart keys that unlock the car remotely. If your key has a plastic head with electronics inside, Walmart's equipment cannot handle it. For those keys, you need a dealership or a professional locksmith who has programming equipment.
Key Takeaways
- Walmart cuts basic metal car keys at the in-store key station for a low cost, usually between $2 and $10 depending on the key type.
- Walmart cannot copy or program transponder keys, smart keys, or any key with a chip or electronic component inside.
- You must bring your original key to Walmart; they cannot cut a key from a photo or description.
- If your car was made after the mid-1990s and uses a key with a plastic head, you will need a dealership or locksmith instead.
- Call your local Walmart ahead of time to confirm the key-cutting service is available, because not every location offers it.
What types of keys Walmart can and cannot copy
Walmart's key-cutting machines work only on traditional metal keys with no electronics. These are the flat, straightforward keys that unlock the door and turn the ignition by mechanical action alone. If your key is all metal and has no plastic head, no buttons, and no visible chip, Walmart can copy it.
Walmart cannot copy transponder keys, which contain a small chip that sends a signal to your car's security system. Most cars made after 1995 use transponder keys. The plastic head of the key houses the chip, and even if Walmart could cut the metal blade to match your original, the new key would not start the car because it lacks the programmed chip. A dealership or automotive locksmith must program a new transponder key using specialized equipment that costs thousands of dollars.
Smart keys and proximity keys—the kind you press a button to unlock or that work when you carry them in your pocket—are also off-limits at Walmart. These require dealership programming and often cost $200 to $400 per key.
How to check if your key can be copied at Walmart
Look at your key. If it is entirely metal with no plastic housing, buttons, or visible electronics, Walmart can copy it. If the key has a plastic head, a button, or any electronic component, it cannot be copied there.
Check your vehicle's manual or call your car's dealership to find out what type of key your car uses. Tell them your vehicle's year, make, and model. They will tell you whether your key is a transponder key, a smart key, or a basic mechanical key. This takes one phone call and removes the guesswork.
You can also search online for your vehicle's key type by year and model. Many automotive forums and locksmith websites list which cars use which key systems, and the information is usually accurate.
Cost of copying a key at Walmart versus other options
Walmart's basic key copying typically costs between $2 and $10 per key, depending on the key type and your location. This is the lowest price you will find for mechanical key copying. A hardware store like Home Depot or Lowe's charges a similar amount.
A dealership charges significantly more for the same mechanical key copy—often $15 to $30—because they are cutting it at their service department rather than a retail location. However, if you need a transponder key or smart key, the dealership is your only realistic option (apart from a locksmith), and the cost jumps to $150 to $400 depending on the key type and your vehicle.
A professional automotive locksmith can copy mechanical keys at a price similar to Walmart, but they can also program transponder and smart keys. If you need a transponder key copied and programmed, a locksmith often costs less than a dealership—typically $100 to $200—though prices vary by location and locksmith.
Steps to get a key copied at Walmart
First, call your local Walmart and ask whether they offer key-cutting service. Not every location has the equipment or staff to do it, so confirming ahead of time saves a wasted trip. Ask what the cost is, because it can vary slightly by location.
Bring your original key to the store. Go to the key-cutting station, which is usually in the hardware section or near the front of the store. Hand your key to the associate and tell them you need a copy. They will place your key in the cutting machine, align it with a blank key, and run the machine. The process takes a few minutes.
Pay for the copy at that station or at checkout, depending on how your Walmart processes key-cutting payments. Test the new key before you leave the store if possible—try it in the lock of your car door to make sure it works. If it does not fit or turn smoothly, ask the associate to adjust it while you are still there.
When you need a locksmith or dealership instead
If your key has any plastic, electronics, or a button, you cannot use Walmart. Call a dealership or a licensed automotive locksmith. A locksmith is often faster and cheaper than a dealership, especially for transponder keys. Search online for "automotive locksmith near me" or ask your car insurance company for a referral—many policies include locksmith coverage.
If you have lost your only key and need a replacement quickly, a locksmith can usually help the same day. A dealership may require an appointment and take longer. However, if your car is still under warranty, the dealership may be the better choice because they can may support the key is programmed correctly for your specific vehicle.
If you are locked out of your car and need when ready access, call a locksmith rather than Walmart. Locksmiths offer emergency services and can open your car and make a new key on the spot. Walmart's key-cutting service is for copying a key you already have access to, not for emergency lockouts.
Frequently Asked Questions
Can Walmart copy a key if I only have a photo of it?
No. Walmart requires the original key to copy it. They need to place the actual key in the cutting machine to match the blade profile. A photo does not provide the precision needed for an accurate copy.
Will a key copied at Walmart work in my car?
If your key is a basic mechanical key with no electronics, yes. If your key has a chip or is a smart key, Walmart cannot copy it at all. For those keys, only a dealership or locksmith with programming equipment can make a working copy.
How long does it take to get a key copied at Walmart?
The actual cutting takes a few minutes. Wait time depends on how busy the key station is. In most cases, you will have your copy within 10 to 15 minutes of handing over your original key.
What if the key Walmart copied does not work?
Ask the associate to adjust it while you are still in the store. Most keys that do not work on the first try need a small adjustment to the blade. If the key still does not work after adjustment, ask for a refund and take your original key to a locksmith instead.
Is it cheaper to copy a key at Walmart or at a hardware store?
Prices are usually the same—between $2 and $10 for a basic mechanical key. Both Walmart and hardware stores like Home Depot use similar equipment and charge similar rates. Choose whichever is more convenient for you.