A transport block is a wooden or metal wedge that holds your car's suspension in place while it sits on a flatbed tow truck or car hauler
When a tow truck or car carrier lifts your vehicle, the suspension compresses or extends depending on how the car is positioned. A transport block — sometimes called a suspension block or load block — prevents that movement. It sits under the frame or suspension components and keeps everything stable during the ride, which protects your suspension bushings, springs, and alignment from damage that could cost hundreds or thousands to repair later.
You encounter transport blocks most often when your car is being towed long distance, shipped to another state, or moved by a professional auto hauler. Some tow operators use them routinely; others skip them to save time. Knowing what they are and why they matter helps you spot the difference between a careful tow and one that risks your suspension.
Key Takeaways
- Transport blocks prevent suspension movement while your car sits on a flatbed, protecting bushings and springs from damage during towing or shipping.
- Long-distance haulers and professional tow services should use blocks as standard practice, though some operators skip them to save time.
- Blocks are typically wooden or metal wedges placed under the frame or suspension arms, not under the wheels or tires.
- If your car will be towed or shipped, ask the operator beforehand whether they use transport blocks and request them in writing on your work order.
How transport blocks protect your suspension during towing
Your car's suspension is designed to move. Springs and bushings absorb bumps when you drive, and the whole system compresses when weight is added or removed. On a flatbed tow truck, that weight shift happens all at once — the front or rear lifts, and the suspension reacts. Without a block, the suspension can extend or compress beyond its normal range, stressing rubber bushings and potentially bending components.
A block wedges itself between the frame and the suspension arm (or between the frame and the ground, depending on the setup) and stops that movement. It's a straightforward mechanical lock. Over a 500-mile tow, that lock prevents hundreds of small stress cycles that add up to worn bushings, misaligned wheels, or a suspension that feels loose or clunky after delivery. The block itself costs the operator a few dollars and takes five minutes to position; the repair bill for suspension damage runs $800 to $2,000.
Where blocks are placed and what they look like
Transport blocks are usually wooden blocks (4x4 or 6x6 timber) or metal wedges, typically 6 to 12 inches long. They're placed under the frame rails or suspension control arms — not under the tires or wheels. A professional operator will position one block under the front suspension area and another under the rear, creating a stable platform that prevents the suspension from moving in any direction while the truck is in motion.
The placement matters. A block shoved randomly under the car does little good; it needs to contact a solid part of the frame or suspension that won't flex. Some operators use adjustable metal blocks that can be wedged tighter; others use straightforward wood blocks held in place by the weight of the car itself. Either way, the block should be visible when you look under the car before it's loaded, and it should still be there when it's unloaded.
When you need transport blocks
You should request transport blocks whenever your car will be towed or shipped more than 50 miles. Short local tows — a broken-down car to a nearby shop — may not need them because the distance and speed are low. But any long-distance tow, any multi-state shipment, or any time your car will sit on a flatbed for hours should include blocks.
This is especially important if your car has a stiff or lowered suspension, an older suspension with worn bushings, or if you're towing a high-value vehicle. A luxury car or a classic with original suspension components is more vulnerable to damage. If you're paying for professional shipping, the cost of blocks is negligible compared to the cost of fixing suspension damage after the fact.
How to make sure blocks are used
Ask the tow operator or shipping company directly: "Do you use transport blocks on your flatbed?" Listen for a clear yes. If they say "we don't usually need them" or "it depends," that's a red flag. Professional long-distance haulers use blocks as standard practice and won't hesitate to say so.
If you're arranging a tow through your insurance company or roadside information, call the dispatch center and request blocks in writing. Ask for confirmation that the request was added to the work order. When the tow truck arrives, look under the car before it's loaded and verify the blocks are in place. Take a photo if you can. When the car is delivered, check that the blocks were removed and that your suspension feels normal — no clunking, no loose feeling in the steering or suspension.
What happens if blocks aren't used
Suspension damage from towing without blocks often doesn't show up when ready. You might notice a slight clunk when turning, a feeling that the car is sitting lower on one side, or a shimmy in the steering wheel. Some damage is invisible until a mechanic puts the car on a lift and inspects the bushings and control arms.
If you suspect your car was towed without blocks and you notice suspension problems afterward, document the symptoms and have a mechanic inspect the suspension. If the damage is recent and the tow operator was at fault, you may be able to file a claim against their liability insurance. Keep the tow receipt and any photos you took before the tow. The operator's insurance company will want to know whether blocks were used, because that's the standard of care in the industry.
Transport blocks versus other suspension protection methods
Some operators use air suspension systems or hydraulic dollies that lower the car's suspension gently and keep it stable. These are more expensive than blocks but offer better protection for high-value vehicles. Others use straps or chains to tie down the suspension, which is less effective than a solid block because straps can stretch or slip.
The cheapest and most common method is still the wooden or metal block. It's not fancy, but it works. If an operator offers you a choice between blocks and a more expensive suspension system, blocks are sufficient for most cars. The premium systems are worth considering only if your car has a very delicate or expensive suspension, or if it's being shipped across the country multiple times.
Frequently Asked Questions
Can transport blocks damage my car's frame or suspension?
No. Blocks are designed to sit against solid frame or suspension components and distribute weight evenly. A properly placed block will not dent, bend, or damage anything. If a block is placed carelessly against a fuel line, brake line, or other vulnerable component, that's operator error — not a problem with the block itself.
Do I need to remove transport blocks myself after delivery?
No. The tow operator or shipping company is responsible for removing blocks before they hand over the car. Verify they're gone before you drive away. If blocks are left in place, contact the operator when ready and ask them to remove them.
What if my car has air suspension or a lowered suspension — do blocks still work?
Yes, but the operator needs to know about it beforehand. Air suspension and lowered suspensions require careful placement of blocks to avoid pinching air lines or damaging components. Tell the operator about any suspension modifications when you book the tow, and ask how they'll handle it.
Are transport blocks required by law?
No federal law requires transport blocks, but many states and insurance companies consider them standard practice for long-distance towing. Professional auto haulers use them routinely. If a tow operator refuses to use blocks without a good reason, that's a sign they may not be following industry standards.
How much do transport blocks cost?
Blocks themselves cost the operator $5 to $20 per set. Some tow companies include them at no extra charge; others charge $20 to $50 per tow. It's worth asking about the cost upfront and requesting them in writing so there's no surprise charge later.