What to look for when buying a used track skid steer

A track skid steer is a compact loader with rubber or steel tracks instead of wheels, designed to spread weight across soft ground without sinking or leaving deep ruts. When you're shopping for one, the condition of the tracks themselves matters more than almost anything else—replacement tracks cost $3,000 to $8,000 per pair depending on the machine size and material. Check for uneven wear, missing lugs, or cracks in the rubber. Spin each track by hand (with the engine off) and listen for grinding or clicking, which signals internal damage to the sprockets or idlers underneath.

The hydraulic system is your second priority. Look for oil leaks around the cylinders, hoses, and pump. Ask the seller for maintenance records showing when hydraulic fluid was last changed—skid steers typically need it every 500 to 1,000 hours of use. Operate the bucket and boom controls yourself if possible; they should move smoothly without jerking or losing pressure partway through the lift. A slow or weak lift usually means the pump is wearing out, and pump replacement runs $2,000 to $4,000.

Engine hours matter, but not in the way you might think. A skid steer with 2,000 hours is not automatically better than one with 3,500 hours if the high-hour machine was serviced regularly and the low-hour one was neglected. Request the service history and look for records of oil changes, filter replacements, and any major repairs. Diesel engines in skid steers often run longer than gasoline ones before needing overhaul, but both types can last 5,000+ hours with proper maintenance.

Key Takeaways

  • Track condition is the biggest cost factor in a used skid steer purchase—replacement tracks run $3,000 to $8,000 and should be inspected for wear, cracks, and internal damage before you commit.
  • Hydraulic leaks and slow lifting indicate expensive repairs ahead; ask for maintenance records showing when hydraulic fluid was last serviced.
  • Engine hours alone do not tell you the machine's true condition—a well-maintained 3,500-hour unit may outlast a neglected 2,000-hour one.
  • Prices vary widely by brand, size, and condition; comparing three to five machines in your region gives you a realistic market range before negotiating.
  • Rental companies and equipment dealers often sell off used skid steers with documented service records, which carry less risk than private sales.

Where to find track skid steers for sale

Equipment dealers and rental companies are your most reliable sources. Dealers like Caterpillar, Bobcat, and John Deere franchises maintain service records and often warranty their used inventory for 30 to 90 days. Rental companies such as United Rentals and Sunbelt Rentals sell machines that have been serviced on a fixed schedule—they know exactly how many hours each unit has run and what work was done. Both sources charge more than private sellers, but the documentation and recourse if something fails within weeks of purchase is worth the premium.

Online marketplaces like Facebook Marketplace, Craigslist, and eBay Motors carry private sales and small dealer listings. Prices are often lower, but you have no warranty and limited recourse if the machine breaks down after purchase. Always request the service history before traveling to see a machine, and bring a mechanic or someone experienced with skid steers if you are buying from a private seller. Auction sites like Machinery Values and IronPlanet sell used equipment from contractors and businesses, sometimes with detailed condition reports, but you cannot inspect the machine in person before bidding.

Understanding pricing and negotiation

Track skid steer prices depend on brand, size, engine type, and condition. A used Bobcat S570 (mid-size, diesel) with 2,000 hours in good condition typically sells for $25,000 to $35,000 in most regions, while a smaller Bobcat S450 might run $18,000 to $28,000. Larger machines like the S650 or S750 can reach $40,000 to $55,000. These are approximate ranges; your local market may be higher or lower depending on demand and supply. Machines with newer tracks, full service records, and no visible damage command the top of the range.

When negotiating, use track condition and service history as your leverage. If the tracks have significant wear, ask for a $2,000 to $4,000 reduction or request that the seller replace them before sale. If maintenance records are missing or incomplete, offer 10 to 15 percent below asking price to account for unknown repair costs. Dealers are less flexible on price than private sellers, but they may throw in a warranty extension or cover the first service if you push. Always get a pre-purchase inspection from an independent mechanic if you are spending more than $20,000—the inspection fee ($300 to $600) pays for itself if it uncovers a hidden problem.

Financing and ownership costs beyond the purchase price

If you are financing a used skid steer, equipment lenders and some banks offer loans with terms of 36 to 60 months. Interest rates typically range from 6 to 12 percent depending on your credit and the machine's age and condition. A $30,000 purchase at 8 percent over 48 months costs roughly $700 per month in principal and interest. Some dealers offer in-house financing at higher rates (10 to 15 percent) if you cannot get a bank loan, but shop around first—credit unions often beat dealer rates.

Operating costs beyond the loan payment include fuel, maintenance, and insurance. A skid steer burns 1 to 2 gallons of fuel per hour depending on engine size and load. Routine maintenance—oil changes, filter replacements, greasing—runs $500 to $1,500 per year if you do it yourself, or $1,500 to $3,000 annually if you use a dealer. Insurance for a skid steer used in construction or landscaping costs $300 to $800 per year depending on your location and coverage level. Factor these costs into your decision if you are buying for business use.

Checking the title and ownership history

Before you hand over money, verify the title is clear and the seller is the legal owner. Ask to see the original title document or a bill of sale from the previous owner. If the machine has a lien (a loan against it), the lender's name will appear on the title. Do not buy a machine with an active lien unless the seller pays it off at closing—otherwise you cannot register or legally operate it. Some states require a bill of sale for equipment sales; check your state's requirements before closing the deal.

Run the serial number through the manufacturer's database to confirm the machine's year, model, and original specifications. This also reveals whether the machine was recalled for any safety issues. Bobcat, Caterpillar, and John Deere all allow you to look this up on their websites using the serial number. If the seller cannot provide the serial number or it does not match the machine, walk away—this is a red flag for stolen or salvaged equipment.

Red flags that signal a bad deal

Avoid machines with a cracked or bent frame, which is expensive to repair and may affect how the machine tracks straight. If the seller cannot or will not let you operate the controls, that is a sign they know something is wrong. Machines that leak hydraulic fluid onto the ground indicate seal failure, and the longer the leak has gone unaddressed, the more internal damage has likely occurred. Rust on the boom or bucket is cosmetic, but deep rust on the frame or undercarriage suggests the machine has been exposed to salt water or stored outside for years.

Be wary of machines with mismatched or heavily patched tracks—this usually means the seller has been limping the machine along rather than replacing worn tracks properly. If the engine cranks but will not start, or starts but runs rough, have a mechanic diagnose it before you commit. Stalling under load or loss of power is often a sign of fuel system problems or internal engine wear, both expensive to fix. Finally, if the price seems too good to be true for the condition and hours shown, ask why. Sometimes a seller is motivated to move inventory quickly, but sometimes they are hiding a major problem.

Frequently Asked Questions

What is the difference between rubber tracks and steel tracks?

Rubber tracks are quieter, cause less ground damage, and cost less to replace ($3,000 to $5,000 per pair). Steel tracks are more durable in rocky or abrasive conditions and last longer, but they are louder and damage pavement. For landscaping or light construction, rubber is standard. For demolition or heavy quarry work, steel makes sense.

How many hours is too many for a used skid steer?

A well-maintained diesel skid steer can run 5,000 to 8,000 hours before major overhaul. Gasoline engines typically last 3,000 to 5,000 hours. Beyond that, you are buying on borrowed time unless the machine has been recently rebuilt. Always prioritize service records over raw hours.

Can I use a skid steer on pavement or asphalt?

Yes, but rubber tracks are gentler on pavement than steel. Prolonged use on hard surfaces wears rubber tracks faster and can damage the undercarriage. If you need a machine for both pavement and soft ground, budget for track replacement more frequently.

Should I buy from a dealer or a private seller?

Dealers offer warranty and documented service history but charge more. Private sellers are cheaper but offer no recourse if the machine fails. For your first skid steer or if you cannot inspect it thoroughly yourself, a dealer's warranty is worth the extra cost.

What documents do I need to complete the purchase?

You need the original title or bill of sale, proof the seller owns the machine free and clear, the serial number, and service records if available. Some states require a bill of sale notarized. Check your state's equipment registration rules before closing the deal.