Track loader parts are sold through the manufacturer's dealer network, industrial equipment suppliers, and online marketplaces that specialize in heavy equipment
A track loader is a compact earthmoving machine with rubber or steel tracks instead of wheels. The parts you need depend on whether you own the machine, operate one for work, or are responsible for maintaining a fleet. Most parts fall into three categories: wear items that need regular replacement (tracks, sprockets, idlers), engine and hydraulic components, and structural or attachment parts.
The fastest way to find the right part is to know your machine's exact model number and serial number. This information is usually stamped on the frame near the engine or on a plate inside the cab. With this number, a dealer can tell you the correct part number, current availability, and lead time — which matters because some parts are made to order.
Prices vary widely. A replacement track can cost between $2,000 and $8,000 depending on the loader size and track type. Engine parts, hydraulic cylinders, and boom components each have their own cost ranges. Buying from the manufacturer's dealer is more expensive than aftermarket suppliers, but the part is may provide to fit and comes with a warranty.
Key Takeaways
- Manufacturer dealers stock genuine parts and can cross-reference your machine's serial number to the correct components, but charge a premium over aftermarket suppliers.
- Aftermarket and used parts cost less but require you to verify compatibility yourself, and warranties vary by seller.
- Wear items like tracks, sprockets, and idler wheels need replacement every 1,000 to 2,000 operating hours depending on soil type and operating conditions.
- Online industrial equipment suppliers and auction sites sell both new and used parts, but shipping heavy components can cost as much as the part itself.
- Keeping your machine's model and serial number on hand speeds up ordering and helps you avoid buying the wrong part.
Manufacturer Dealers vs. Aftermarket Suppliers
Manufacturer dealers — the authorized service centers for brands like Bobcat, Caterpillar, John Deere, and ASV — stock genuine parts and can order anything not in inventory. They have access to the full parts catalog and can tell you which components are compatible with your specific serial number. A dealer will also warranty the part and the installation if you have them do the work.
Aftermarket suppliers and independent distributors buy parts from third-party manufacturers or salvage them from used machines. These parts cost 30 to 50 percent less than genuine parts. The trade-off is that you assume the risk of compatibility — the part may fit mechanically but not perform identically to the original. Some aftermarket parts are high-quality; others are not. Reading reviews from other operators on the same machine model helps you avoid low-quality suppliers.
Used parts from salvage yards or online auction sites cost the least but come with no warranty. You are buying the part as-is, and shipping a heavy component like a hydraulic cylinder or boom section can cost $500 to $2,000. This route makes sense only if you know the part is in good condition and you have a way to inspect it before payment.
Common Wear Items and Replacement Intervals
Track loaders wear out specific components faster than others depending on how hard they work. Rubber tracks last 1,000 to 2,000 operating hours in normal conditions; steel tracks last longer but cost more upfront. Sprockets (the gears that drive the track) and idler wheels (the wheels that guide the track) wear at similar rates and often need replacement together with the track.
Engine oil, hydraulic fluid, and filters need changing on a schedule set by the manufacturer — usually every 250 to 500 operating hours. Spark plugs, air filters, and fuel filters follow their own intervals. These consumables are inexpensive compared to structural parts, and buying them from a dealer or online supplier makes little difference in price.
Hydraulic hoses, cylinders, and seals fail when the machine works in dusty or wet conditions. A single hydraulic cylinder can cost $1,500 to $4,000 depending on size and bore. Hoses are cheaper but harder to diagnose — a leak may come from a cracked hose, a loose fitting, or a failed seal. A dealer can pressure-test the system to pinpoint the problem.
How to Order Parts Online
Industrial equipment suppliers like eBay Motors, Machinery Values, and brand-specific sites let you search by model number. Enter your loader's model (for example, "Bobcat T650") and browse the parts diagram. The diagram shows each component with a part number. Click the part, add it to your cart, and check the shipping cost before you buy — it often exceeds the part price for heavy items.
Some suppliers offer a parts diagram tool where you select your exact model and year, then click the component you need. This reduces the chance of ordering the wrong part. Always verify the part number matches your machine's documentation before checkout.
Shipping times vary. Dealers usually ship within one to three business days if the part is in stock; if not, lead time can be two to four weeks. Online aftermarket suppliers may take five to ten business days. International suppliers are cheaper but can take four to eight weeks and may charge customs fees.
Reading a Parts Diagram and Identifying Components
A parts diagram is a technical drawing that shows every component on your machine with a number. Each number corresponds to a part number in a table. To use it, locate the component you need on the diagram, note its number, then find that number in the parts list to get the actual part number you order.
Diagrams are organized by system: engine, hydraulics, track and undercarriage, boom and bucket, cab and controls. If you do not know which system your part belongs to, start with the undercarriage section for track and sprocket issues, the hydraulics section for cylinder or hose problems, and the engine section for fuel or cooling issues.
Manufacturer websites and dealer sites usually let you read the parts manual as a PDF. Some require you to enter your serial number first. If you cannot find the manual online, call the dealer with your model and serial number and ask them to email it to you or print a copy of the specific page you need.
Shipping and Installation Considerations
Track loader parts are heavy. A replacement track weighs 500 to 1,500 pounds; a hydraulic cylinder weighs 100 to 400 pounds. Shipping costs are calculated by weight and distance. A track shipped across the country can cost $800 to $1,500. Some suppliers offer free shipping on orders over a certain amount, but that usually applies only to smaller parts.
Installation difficulty varies. Replacing an oil filter or air filter takes 15 to 30 minutes. Replacing a track requires removing bolts, sliding the old track off, and sliding the new one on — a two-person job that takes one to two hours. Replacing a hydraulic cylinder requires disconnecting hoses, removing bolts, and reconnecting — work that is easier with a second person and a hoist.
If you do not have the tools or experience, a dealer can install the part for you. Labor rates vary by location and dealer, but expect to pay $75 to $150 per hour. A track replacement might take three to four hours of labor; a cylinder replacement might take two to three hours. Factor this into your total cost when deciding between doing the work yourself and having a dealer do it.
Finding Parts for Older or Discontinued Models
If your track loader is more than ten years old, the manufacturer may no longer stock parts for it. Dealers can sometimes special-order them, but lead times stretch to six to twelve weeks and prices rise because the parts are no longer in regular production.
Salvage yards and used equipment auctions are your best option for older machines. Search online auction sites by model and year, or contact local salvage yards that specialize in heavy equipment. You can also post on equipment forums or Facebook groups dedicated to your machine's brand — other operators often know where to find hard-to-find parts.
Aftermarket suppliers sometimes make universal or semi-universal parts designed to fit multiple models. A universal hydraulic cylinder, for example, can work on several loader sizes if you match the bore diameter and rod diameter. These parts are cheaper and easier to find than original equipment, but verify compatibility with the supplier before ordering.
Frequently Asked Questions
How do I know if a part is compatible with my track loader?
Match your machine's model number and serial number to the parts diagram in the manufacturer's manual. The diagram shows which part number fits your specific serial number. If you are buying from an aftermarket supplier, provide them with your model and serial number and ask them to confirm compatibility before you pay.
Can I use parts from a different brand on my track loader?
Some universal parts like hydraulic hoses, bolts, and filters work across brands if the specifications match. Structural parts like booms, buckets, and tracks are usually brand-specific. Ask the supplier whether the part is designed for your machine or is a universal fit, and get that confirmation in writing.
What is the difference between OEM and aftermarket parts?
OEM (original equipment manufacturer) parts are made by or for the brand that built your loader. Aftermarket parts are made by third-party companies. OEM parts cost more but are may provide to fit and come with a warranty. Aftermarket parts cost less but vary in quality and may not perform identically to the original.
How long does it take to get a part if the dealer does not have it in stock?
Lead time depends on the part and the dealer's supply chain. Common wear items like filters and hoses usually arrive within one to three business days. Specialized parts like hydraulic cylinders or boom sections can take two to four weeks. Ask the dealer for an estimated delivery date before you order.
Is it cheaper to buy used parts than new ones?
Used parts cost 40 to 60 percent less than new parts, but you have no warranty and cannot return them if they fail. This savings makes sense for expensive items like hydraulic cylinders if you can inspect the part before buying. For wear items like tracks or filters, new parts are safer because you know their condition and lifespan.