What a tankless electric water heater does in an RV

A tankless electric water heater heats water on demand instead of storing it in a tank. When you turn on a hot tap in your RV, cold water flows through a heating element powered by your coach battery or inverter, and hot water comes out when ready. You never run out of hot water the way you do with a traditional tank heater—but you also draw a lot of electrical power all at once, which is the real constraint in an RV.

Most RVs come with either a propane tank heater or a combination unit that runs on propane when you're boondocking and switches to electric when you're plugged into shore power. A tankless electric model replaces that system entirely, which means you lose the propane option unless you keep a separate propane heater as backup. That trade-off matters more than it sounds, because a tankless electric unit demands 5,000 to 13,000 watts of continuous power—far more than most RV electrical systems can deliver safely.

Key Takeaways

  • Tankless electric water heaters require 5,000 to 13,000 watts of power, which means you need either a 50-amp shore power connection or a large inverter and dual batteries to run one reliably.
  • These heaters work best for RVers who stay plugged into shore power most of the time and rarely boondock or dry camp.
  • A traditional propane tank heater or hybrid unit is more practical for most RVs because it works off-grid and uses less electrical capacity.
  • Installation requires running new electrical circuits from your main panel and may need an upgrade to your RV's electrical infrastructure.
  • Tankless electric units have no moving parts and rarely fail, but they cannot operate if your power source cannot sustain their draw.

Why electrical power is the real limiting factor

An RV's electrical system is built around a 12-volt coach battery and a converter that charges it when you're plugged in. Most RVs have a 30-amp shore power inlet, which delivers about 3,600 watts total—not enough to run a tankless electric heater and anything else at the same time. A 50-amp inlet delivers about 12,000 watts, which is enough, but only if you're plugged into a 50-amp pedestal at a campground.

If you boondock or dry camp, you would need an inverter large enough to convert your battery power to 120-volt AC current, plus a battery bank big enough to sustain 5,000+ watts for the time you're using hot water. A single 200-amp-hour lithium battery bank can run a tankless heater for a few minutes, but not for a shower. You would need 400 to 600 amp-hours of battery capacity, which costs $4,000 to $8,000 and takes up significant space.

This is why most RV owners who want unlimited hot water keep their propane heater and add a small electric heater as a supplement when plugged in. That approach costs less, uses less space, and works in more situations.

How tankless electric heaters compare to propane and hybrid systems

A traditional propane tank heater stores 6 to 10 gallons of hot water and reheats it as needed. It works anywhere—plugged in or boondocking—because propane is self-contained. The downside is that you can run out of hot water if multiple people shower back-to-back, and propane heaters need annual maintenance and occasional repair.

A hybrid or combination unit runs on propane when you're off-grid and switches to electric when you're plugged into shore power. This gives you the best of both worlds: unlimited hot water when plugged in, and a working heater when boondocking. Most modern RVs come with this setup. The trade-off is that hybrid units are more complex and cost more upfront than a propane-only heater.

A tankless electric heater gives you unlimited hot water and no propane to manage, but only when you have enough electrical power. It is the simplest system mechanically—no moving parts, no combustion, no annual service—but it is also the most demanding electrically. For an RV that stays at full-hookup campgrounds most of the time, it can work. For anything else, it creates problems.

What installation actually involves

Installing a tankless electric water heater in an RV requires running new electrical circuits from your main breaker panel to the heater location, usually under the sink or in a cabinet. The circuit needs its own breaker sized to the heater's amperage draw—typically 40 to 60 amps for a unit that draws 5,000 to 13,000 watts at 120 volts. Your RV's main panel may not have space for an additional breaker, or the existing wiring may not be heavy enough to carry that load safely.

You also need to disconnect or remove the old propane heater, which means capping off the propane line and removing the tank connection. If your RV has a hybrid unit, you are losing the propane backup entirely unless you install a separate small propane heater for emergencies.

Most RV owners hire a may have access to RV technician or electrician to do this work, because running high-amperage circuits in an RV requires knowledge of the specific electrical layout and local electrical codes. The labor cost typically runs $500 to $1,500 depending on how much rewiring is needed. The heater itself costs $300 to $800.

When a tankless electric heater makes sense for your RV

A tankless electric water heater is practical if you meet most of these conditions: you stay at full-hookup campgrounds with 50-amp service most of the time; you rarely boondock or dry camp; you want unlimited hot water without managing propane; and you are willing to accept that you cannot use hot water if shore power fails or you lose electrical connection.

It is less practical if you boondock regularly, camp at 30-amp-only sites, or want a backup heating option when shore power is not available. In those situations, keeping your propane heater or upgrading to a hybrid unit is more reliable and less expensive overall.

If you are building or heavily renovating an RV, a tankless electric heater can be part of a larger electrical upgrade that includes a larger inverter, more battery capacity, or a solar array. That approach makes sense if you are already investing in electrical infrastructure. If you are retrofitting an existing RV with standard electrical capacity, the cost and complexity usually outweigh the benefit.

Maintenance and reliability of tankless electric units

Tankless electric water heaters have no combustion chamber, no pilot light, no moving parts, and no propane connections to leak or corrode. They rarely fail mechanically. The heating element can burn out after years of use, but replacement is straightforward and costs $100 to $300.

The real maintenance issue is water quality. If your RV's water system has sediment or mineral buildup, it can clog the heater's internal passages and reduce flow or heating power. Flushing the heater annually with a descaling solution keeps it working at full capacity. This is the same maintenance a propane heater needs, so it is not an additional burden.

The main failure point is electrical: if your inverter fails, your shore power connection is loose, or your battery voltage drops too low, the heater will not work. A propane heater keeps working in those situations. This is why many RV owners see a tankless electric heater as a luxury feature, not a replacement for their primary heating system.

Frequently Asked Questions

Can I run a tankless electric water heater on my RV's battery alone?

Not practically. A tankless heater draws 5,000 to 13,000 watts, which would drain even a large battery bank in minutes. You would need 400 to 600 amp-hours of lithium batteries plus a 6,000-watt inverter, costing $6,000 to $10,000. Most RV owners find this investment not worth it compared to keeping a propane heater.

What size tankless electric heater do I need for an RV?

Most RVs use a 5,500 to 8,000-watt unit, which heats water fast enough for a shower or sink use. Larger units (10,000+ watts) heat faster but demand more electrical power. Check your RV's shore power capacity and main panel before choosing; your electrician can recommend the right size for your setup.

Can I keep my propane heater and add a tankless electric heater?

Yes, but it requires two separate circuits and two heater units, which takes up space and costs more. Most RV owners instead upgrade to a hybrid unit that switches between propane and electric automatically, or they keep propane and add a small electric point-of-use heater under the sink.

Will a tankless electric heater work at a 30-amp campground?

Not reliably. A 30-amp connection delivers only 3,600 watts total, and a tankless heater needs 5,000 to 13,000 watts. You could run it briefly if nothing else is drawing power, but you cannot shower while running the air conditioner, microwave, or other appliances. A 50-amp connection is the minimum for practical use.

How much does it cost to install a tankless electric water heater in an RV?

The heater itself costs $300 to $800, and installation labor typically runs $500 to $1,500 depending on how much electrical rewiring your RV needs. Budget $1,000 to $2,500 total. If your RV's electrical panel needs upgrading or new circuits need to be run long distances, costs can be higher.