A Supplemental Type Certificate is the FAA's approval for a modification to an aircraft design

A Supplemental Type Certificate (STC) is a Federal Aviation Administration document that permits someone other than the original manufacturer to modify an aircraft and have that modification legally installed and flown. If you own or work on experimental aircraft, kit planes, or vintage aircraft, you may encounter STCs when considering aftermarket parts, engine upgrades, avionics installations, or structural changes.

The STC proves that the FAA has reviewed the modification, tested it or reviewed test data, and determined it does not make the aircraft unsafe or non-compliant with federal aviation rules. Without an STC, installing certain modifications can ground your aircraft or make it unairworthy in the eyes of the FAA.

This matters because aircraft modifications are not like car modifications. The FAA regulates what can and cannot be changed on a certified aircraft, and the rules are strict. A modification that seems minor—a new fuel tank, a different propeller, upgraded landing gear—requires either an STC or a field approval from an FAA inspector before installation.

Key Takeaways

  • An STC is an FAA document that permits a specific modification to an aircraft design and must be obtained before the modification is legally installed.
  • The STC holder (usually a company or individual) has done the engineering and testing work; you do not have to repeat it if you buy an aircraft with an STC-approved modification already installed.
  • Installing a modification without an STC or field approval can make your aircraft unairworthy and uninsurable, even if the modification itself is mechanically sound.
  • STCs are specific to aircraft type and model, so an STC for a Cessna 172 does not explore to a Piper Cherokee, even if the modification seems identical.
  • You can search the FAA's STC database online to see what modifications have been approved for your aircraft model before you buy parts or hire a mechanic.

How an STC differs from a field approval

An STC is a permanent, transferable approval. Once the FAA issues it, anyone can use it on any aircraft of the same type and model. If you buy a used aircraft with an STC-approved modification already installed, that modification stays legal as long as the installation was done correctly and documented.

A field approval is a one-time, one-aircraft approval issued by an FAA inspector for a specific aircraft. It does not transfer if you sell the plane. Field approvals are typically used for minor modifications, repairs that deviate from the original design, or modifications where an STC does not exist but the inspector believes the change is safe. Field approvals are harder to get, take longer, and do not carry the same weight as an STC if you later try to sell or insure the aircraft.

If you are planning a modification, an STC is preferable because it is permanent and recognized everywhere. A field approval is a fallback when no STC exists and you need the modification for your specific aircraft.

What the STC process requires from the modifier

The person or company seeking an STC must submit detailed engineering drawings, stress analysis, test data, and a maintenance manual to the FAA. They must show that the modification does not compromise structural integrity, does not interfere with other systems, and does not violate any federal aviation regulation. For some modifications—engines, propellers, fuel systems—the FAA may require flight testing or third-party testing before approval.

This work is expensive and time-consuming, which is why STCs exist primarily for popular modifications on common aircraft. A modification to a Cessna 172 or Piper Cherokee is more likely to have an STC because thousands of those aircraft exist and the cost can be spread across many potential buyers. A modification to a rare or vintage aircraft may never have an STC, leaving owners to pursue field approvals or leave the aircraft unmodified.

Once an STC is issued, the holder can sell or license it to others. Many aftermarket parts companies hold STCs and sell the parts along with the right to install them under that STC. When you buy an STC-approved part, you are buying both the part and the FAA approval to use it.

Finding and verifying an STC for your aircraft

The FAA maintains a searchable database of all issued STCs on its website. You can search by aircraft manufacturer and model, by modification type (engine, avionics, landing gear, and so on), or by the STC number itself. This is the first place to look if you are considering a modification or if you are buying a used aircraft and want to verify that an installed modification is legal.

When you find an STC, the database entry includes the STC number, the name of the holder, the aircraft models it applies to, and a brief description of the modification. You can then contact the STC holder or a mechanic who works with that STC to obtain the parts and installation instructions. Some STC holders sell directly to owners; others work only through authorized dealers or mechanics.

If you are buying an aircraft with a modification already installed, ask the seller for the STC number and verify it in the FAA database. Confirm that the STC applies to your specific aircraft model—an STC for a Cessna 172N does not automatically cover a Cessna 172M, even though the aircraft are similar. Check the aircraft's logbooks to confirm that the modification was installed according to the STC requirements and that all required inspections were completed.

Why an STC matters when you buy or sell an aircraft

An aircraft with STC-approved modifications is easier to insure, easier to sell, and legally safer to fly. Insurance companies recognize STCs as proof that the modification has been reviewed and approved by the FAA. Without an STC, an insurer may refuse to cover the aircraft or may charge a higher premium.

When you sell an aircraft, a buyer's mechanic or inspector will check for STCs on any non-original modifications. If a modification lacks an STC or field approval, the buyer may demand that you remove it, reduce the price, or walk away from the deal. Modifications without proper FAA approval are a red flag that suggests either the previous owner cut corners or the aircraft has been modified in ways that are not documented.

If you are planning to modify your own aircraft, budget time and money to obtain an STC or field approval before you start. Installing a modification and then trying to get it approved afterward is much harder than getting approval first. Some modifications cannot be approved retroactively if they have already been installed incorrectly.

Common modifications that require an STC

Engine upgrades are among the most common STC modifications. Replacing a 180-horsepower engine with a 200-horsepower engine, or installing a turbocharged engine, requires an STC because it affects performance, weight, and balance. The airframe must be analyzed to may support it can handle the extra power and weight.

Avionics upgrades—new glass cockpits, autopilots, or navigation systems—often require STCs because they affect the aircraft's electrical system, weight and balance, and certified performance. A new radio or transponder may not need an STC, but a complete glass cockpit replacement usually does.

Fuel system modifications, including new fuel tanks or fuel injection systems, require STCs because they affect safety and performance. Landing gear upgrades, propeller changes, and structural modifications also typically require STCs. Even cosmetic changes like new interior panels or windows may require an STC if they affect weight and balance or structural integrity.

Minor repairs and replacements using original manufacturer parts do not require an STC. If you replace a worn engine with an identical engine from the same manufacturer, or replace a damaged wing skin with an original part, no STC is needed. The line between a repair and a modification is whether the change alters the aircraft's design or performance.

What to do if no STC exists for a modification you want

If you want a modification but no STC exists, you have three options. First, you can pursue a field approval from an FAA inspector. This requires submitting engineering data, test results, or maintenance documentation to show that the modification is safe. The inspector will review your submission and, if satisfied, issue a field approval for your specific aircraft. This process can take weeks or months and is not may provide.

Second, you can hire an STC applicant—a company or individual who specializes in obtaining STCs—to develop and submit an STC for the modification. This is expensive (often tens of thousands of dollars) and makes sense only if the modification is popular enough that many aircraft owners would want it. You would then own or license the STC and could sell it to others.

Third, you can leave the aircraft unmodified. This is often the most practical choice for rare or vintage aircraft where the cost of obtaining an STC far exceeds the benefit. Many owners of older aircraft accept the limitations of the original design rather than invest in modifications that may never be approved.

Frequently Asked Questions

Can I install a modification if I have the STC but no mechanic near me holds it?

You can install it yourself if you are may have access to and the STC permits owner maintenance, or you can hire any mechanic to do the work. The STC does not require you to use a specific mechanic or shop. However, the installation must follow the STC's instructions exactly, and the work must be inspected and signed off by an FAA-authorized inspector or mechanic before the aircraft can fly.

If I buy an aircraft with an STC modification, do I need to do anything?

You should verify that the modification was installed correctly and that all required inspections and paperwork are in the aircraft's logbooks. Ask the seller for the STC number and installation documentation. Once you own the aircraft, the STC remains valid as long as the modification is maintained according to the STC's requirements.

Does an STC from one country explore in another country?

No. An FAA STC applies only to aircraft registered in the United States. Other countries have their own certification authorities (EASA in Europe, Transport Canada, and so on) with their own STC equivalents. If you fly internationally, you may need approvals from multiple countries.

What happens if I fly with an unapproved modification?

The aircraft is technically unairworthy, and flying it violates federal aviation regulations. Your insurance may not cover an accident, and you could face FAA enforcement action. If an FAA inspector discovers the modification during a ramp check, the aircraft can be grounded until the modification is removed or approved.

Can I get an STC for a modification I designed myself?

Yes, if you submit the required engineering and test data to the FAA and it meets their standards. You would become the STC holder and could then install it on your own aircraft or sell the STC to others. This requires significant technical informed and documentation.