What an SKF cross reference does and why you need one
An SKF cross reference is a tool that matches an SKF bearing part number to equivalent bearings made by other manufacturers. When you need to replace a worn bearing in your vehicle and the original part is an SKF bearing, a cross reference tells you which bearings from Timken, FAG, NSK, or other makers will fit in the same space and do the same job.
You need a cross reference when the SKF bearing you want is out of stock, costs more than alternatives, or you prefer to buy from a supplier who stocks a different brand. The cross reference ensures the replacement bearing has the same bore diameter, outer diameter, width, and load rating as the original.
SKF publishes cross reference data through bearing distributors, their official website, and third-party bearing databases. The process is straightforward once you know where to look and what information to gather first.
Key Takeaways
- An SKF cross reference matches an SKF bearing number to equivalent bearings from other manufacturers with identical dimensions and load capacity.
- You need the complete SKF part number (including any suffix letters) and the bearing's bore diameter to find an accurate cross reference.
- SKF's official bearing selector tool, major distributors like Anixter and Motion Industries, and bearing databases like BearingWorks all offer cross reference lookups.
- Cross referenced bearings must have the same bore diameter, outer diameter, width, and dynamic load rating to be truly interchangeable.
- If a cross reference shows no matches, the bearing may be a specialty part, and you should contact an SKF distributor or the vehicle manufacturer directly.
Gathering the SKF bearing number and specifications
Before you search for a cross reference, write down the complete SKF part number from the bearing itself or from your vehicle's service manual. SKF numbers follow a pattern like 6205-2Z or 6309-RS, where the first four digits identify the bearing type and size, and the suffix (like 2Z or RS) describes the seals or shields.
If you cannot read the number on the bearing, check your vehicle's service manual under the section for the component you are replacing—wheel bearings, transmission bearings, or engine bearings. The manual will list the OEM part number, which you can then cross reference to SKF if needed.
Write down the bore diameter (the inner hole size) as well. This number is usually printed on the bearing or listed in the manual. The bore diameter is the most critical piece of information because a cross reference must match it exactly. A bearing with a 25 mm bore cannot replace one with a 30 mm bore, even if everything else looks similar.
Using SKF's official bearing selector and cross reference tool
SKF maintains a bearing selector tool on their website at skf.com. Navigate to their bearing search or selector page and enter your SKF part number in the search field. The tool will display the bearing's specifications: bore diameter, outer diameter, width, dynamic load rating, and static load rating.
Once you have pulled up the SKF bearing, look for a "cross reference" or "equivalent bearings" section on the same page. SKF's tool will show you which bearings from other manufacturers (Timken, FAG, NSK, and others) have the same dimensions and load ratings. Write down the equivalent part numbers and the manufacturer names.
If the SKF website tool does not show cross references, or if you prefer a more detailed comparison, move to a bearing distributor's database. This step is free and takes only a few minutes.
Finding cross references through bearing distributors
Large bearing distributors maintain searchable databases that include cross references for thousands of bearings. Motion Industries, Anixter, and Applied Industrial Technologies all offer online cross reference tools. You do not need an account to search; most tools are open to the public.
Go to the distributor's website and look for a "cross reference" or "bearing finder" link. Enter your SKF part number. The database will return a list of equivalent bearings from other brands, usually with pricing and stock status. This is useful because you can see at a glance which alternatives are in stock and how their prices compare.
Write down the part numbers and manufacturers of the bearings that match. Check the specifications table to confirm the bore diameter, outer diameter, and width all match the original SKF bearing. If they do, any of those bearings will work as a replacement.
Using third-party bearing cross reference databases
Websites like BearingWorks, NTN Bearing, and other bearing reference sites maintain cross reference tables that you can search for free. These databases are often more comprehensive than a single distributor's tool because they pull from multiple sources.
Search for your SKF part number on one of these sites. The results will show you equivalent bearings from competing manufacturers, along with their specifications. Some sites also show you which distributors stock each equivalent bearing, which can help you find the best price and availability.
Cross reference databases are most useful when you want to compare many options at once or when you are looking for a bearing that is hard to find. If you find a cross reference on one site, verify it on a second site or with a distributor before you order, especially if the bearing is for a critical process like a wheel bearing.
Verifying that a cross reference bearing will actually fit
Once you have found a cross referenced bearing, check four specifications to make sure it will work: bore diameter, outer diameter, width, and dynamic load rating. All four must match the original SKF bearing exactly.
Bore diameter is the hole in the center of the bearing. Outer diameter is the outside edge. Width is the thickness of the bearing. Dynamic load rating is a number (measured in Newtons or pounds) that tells you how much rotating load the bearing can handle. If any of these four numbers differs from the original, the bearing will not fit or will not perform correctly.
Some cross references will show bearings with the same bore and outer diameter but a different width. These are not true replacements and should not be used. A bearing that is too thin will rattle in its housing; one that is too thick will not fit at all.
What to do if you cannot find a cross reference
If you search multiple sources and find no cross reference for your SKF bearing, the bearing may be a specialty part made only by SKF, or the part number may be regional or discontinued. In this case, contact an SKF distributor directly with your part number and vehicle information. They can tell you whether the bearing is still made, whether a newer equivalent exists, and whether a true cross reference is available.
You can also contact the vehicle manufacturer's parts department with the vehicle identification number (VIN) and the component you are replacing. They may be able to tell you the current part number and whether other manufacturers' bearings are approved for that process.
Do not guess or use a bearing that is close but not exact. A bearing with the wrong dimensions or load rating can fail under normal driving and cause damage to the component it supports.
Frequently Asked Questions
Can I use a bearing with a different outer diameter if the bore diameter matches?
No. The outer diameter must match exactly because the bearing sits in a housing with a specific inner diameter. A bearing that is too large will not fit; one that is too small will spin inside the housing and fail. Always verify all four specifications before ordering.
What does the suffix in an SKF part number mean?
Suffixes like 2Z, RS, or 2RS describe seals or shields on the bearing. 2Z means metal shields on both sides; RS means rubber seals on one side; 2RS means rubber seals on both sides. When cross referencing, match the suffix as closely as possible because it affects how well the bearing is protected from dirt and moisture.
Is a cross referenced bearing as good as the original SKF bearing?
If the cross reference is accurate and the bearing meets the same specifications, yes. Timken, FAG, and NSK all make high-quality bearings. The difference is usually in price and availability, not in performance. Buy from a reputable distributor to avoid counterfeit bearings.
Can I cross reference an SKF bearing to a generic or no-name brand?
You can find cross references to any manufacturer, but stick with established bearing makers (Timken, FAG, NSK, Koyo, NTN). Generic or unknown brands may have incorrect specifications, poor quality control, or counterfeit parts. The cost savings are not worth the risk of bearing failure.
Where do I buy a cross referenced bearing once I have the part number?
You can order from the bearing distributor whose database you used, from online retailers like Amazon or eBay, or from local auto parts stores. Compare prices across at least two sources. Verify that the seller is authorized to sell that brand and that the bearing comes in original packaging, not a generic box.