RV blinds wear out faster than house blinds because of constant vibration, temperature swings, and UV exposure on the road

RV window coverings take a beating. The constant movement of travel, intense sun through windows, and temperature changes from desert heat to mountain cold break down the mechanisms and fabric much faster than stationary home blinds. Most RV blinds last three to seven years depending on how often you travel and how much direct sun your windows face. When yours stop rolling smoothly, won't stay in place, or the fabric tears, replacement is usually cheaper and faster than repair.

You have three main paths: buy blinds made specifically for your RV model, purchase universal RV blinds that fit common window sizes, or install standard aftermarket blinds designed for RVs. Each has different costs, fit quality, and installation difficulty. The right choice depends on whether you know your exact window dimensions, how much you want to spend, and whether you're comfortable removing the old blinds and mounting new hardware.

Key Takeaways

  • RV-specific blinds are made for your exact model and usually fit without modification, but cost more and take longer to order than universal options.
  • Universal RV blinds work in most motorhomes and travel trailers if you measure your window opening width and height correctly before ordering.
  • Removing old blinds typically means unscrewing mounting brackets from the window frame, a task that takes 15 to 30 minutes per window with basic tools.
  • Installation of new blinds usually involves drilling new holes or using existing ones, then securing brackets and sliding the blind assembly into place.
  • Fabric blinds, roller blinds, and pleated shades each have different durability and light-blocking trade-offs for RV use.

OEM blinds versus aftermarket: what the difference costs

Original equipment manufacturer (OEM) blinds are made by the company that built your RV — Winnebago, Fleetwood, Thor, Forest River, and others. You order them through an RV dealer using your RV's model year and floor plan. OEM blinds fit your windows exactly because they were designed for that specific opening. They typically cost between $80 and $200 per blind depending on size and type, and you usually wait two to four weeks for delivery.

Aftermarket blinds sold by RV parts suppliers like Camping World, Amazon, and specialty RV shops are built to fit common RV window sizes rather than specific models. They cost $40 to $120 per blind and ship within days. The trade-off is that you need to measure your window opening yourself and accept that the fit may require minor adjustments — shimming the brackets, drilling new holes, or trimming the blind slightly. For many RV owners, the lower cost and faster delivery outweigh the extra installation work.

A third option is buying standard window blinds from home improvement stores and adapting them to your RV. This works only if your window opening matches common residential sizes (usually 24 to 48 inches wide), and the blinds must be designed for the type of mounting your RV windows use. This route is cheapest but carries the highest risk of poor fit and wasted money.

Measuring your RV windows correctly

Measure the inside width of the window frame at the top, middle, and bottom. RV windows are sometimes slightly tapered, so the three measurements may differ by a quarter inch or more. Use the smallest width as your order size — this ensures the blind will fit without binding. Measure the height from the top of the frame to the bottom, again at the left, center, and right. Write down the smallest height measurement.

Check whether your windows have a lip or trim that protrudes inward. If they do, measure the depth of that lip. Some blinds mount inside the frame (between the lips), while others mount on the outside of the frame. Mounting location affects which size you order and how the blind will look when installed. Take photos of your window from the side to show the frame profile to a supplier if you're unsure.

Measure at least two windows if your RV has different window sizes — many RVs have larger windows in the living area and smaller ones in the bedroom and bathroom. Write down which blind size goes in which location so you don't mix them up when they arrive.

Removing old blinds without damaging the frame

Most RV blinds mount with brackets screwed into the window frame or the wall beside the window. Open the blind fully and look for the mounting brackets at the top corners. You'll see either Phillips-head or square-drive screws holding the brackets to the frame. Use the correct screwdriver to avoid stripping the screw heads — a stripped screw in an RV window frame is difficult to remove without damaging the frame itself.

Unscrew both brackets and gently lower the blind assembly. If the blind is a roller or pleated type, it may slide out of the brackets once they're loose. If it's a fabric blind with a headrail, support the headrail with one hand while you remove the second bracket so it doesn't drop and crack. Set the old blind aside.

Inspect the screw holes in the frame. If they're stripped or enlarged, you have two choices: fill them with wooden toothpicks and wood glue, let the glue dry, then re-drill slightly offset holes for new screws; or use larger-diameter screws in the same holes if the frame is thick enough. RV window frames are usually aluminum or thin plastic, so the toothpick method is safer.

Installing new blinds: inside-mount versus outside-mount

Inside-mount blinds sit within the window frame, between the side lips. They look cleaner and don't block any wall space, but they must fit precisely or they'll bind when you roll them up and down. Outside-mount blinds attach to the wall or frame above and to the sides of the window opening. They're more forgiving of measurement errors and work better if your window frame is damaged or irregular.

For inside-mount installation, position the mounting brackets at the top inside corners of the frame. Mark the screw holes with a pencil. If the old holes are still usable, use them. If not, drill new holes slightly offset from the old ones. Use screws that match the bracket design — most RV blinds come with the correct screws. Insert the brackets and tighten the screws firmly but not so hard that you crack the frame.

Slide the blind assembly into the brackets. Most blinds have a headrail that sits in a channel or slot in the bracket. Align the headrail with the channel and slide it in from one side. The blind should move smoothly and sit level. If it binds or tilts, remove it and check that the brackets are at the same height and distance from the frame.

For outside-mount installation, position the brackets on the wall above the window or on the frame exterior. Mark and drill holes, then find the brackets. Outside-mount blinds typically have a wider headrail that sits on top of the brackets rather than sliding into them. Make sure the blind is centered over the window opening and level before tightening all screws.

Blind types and their durability in RV conditions

Roller blinds have a single piece of fabric that rolls up onto a tube at the top. They're lightweight, compact, and block light completely when closed. The mechanism is straightforward — fewer moving parts mean fewer things to break. Roller blinds work well in RVs because they don't rattle during travel and take up minimal space. The downside is that the fabric can tear if snagged, and the roller mechanism can jam if dust gets inside.

Pleated or cellular shades fold like an accordion. They insulate better than roller blinds because the pleats trap air, which helps keep heat in during cold nights and out during hot days. They're quieter than roller blinds and look more finished. The trade-off is that the pleats collect dust and are harder to clean. The folding mechanism is more complex and can wear out faster on the road.

Fabric blinds with cords or wands are traditional venetian-style blinds with horizontal slats. They offer precise light control and are durable if the mechanism is protected from vibration. In an RV, the cords can fray and the slats can rattle. They're heavier than other options and take up more space when fully raised. Most RV owners avoid this style for travel trailers and motorhomes because the moving parts don't handle road vibration well.

Maintenance and troubleshooting after installation

Clean your RV blinds every two to four weeks, depending on how much dust your travel route generates. Use a soft brush or microfiber cloth to wipe roller and pleated blinds. For pleated shades, brush gently along the folds to avoid crushing them. Vacuum the top of the headrail where dust accumulates. Never use water or cleaning solution on the fabric unless the manufacturer specifically says it's safe — moisture can damage the mechanism and cause mold in the enclosed RV environment.

If a roller blind stops rolling smoothly, the mechanism may be jammed with dust or the spring inside may be losing tension. Try rolling it up and down several times to work out any debris. If that doesn't help, the mechanism usually can't be repaired and the blind needs replacement. If a pleated shade won't fold properly, check that the pleats aren't creased or bent. Gently straighten any bent pleats by hand. If the shade still won't move, the track may be bent and the shade will need to be replaced.

If the blind tilts or sits unevenly after installation, the brackets may not be level. Use a small level to check both brackets. If one is higher than the other, loosen the screws slightly and adjust the bracket position, then re-tighten. A tilted blind will bind and wear out faster.

Frequently Asked Questions

Can I use regular house blinds in my RV?

Standard house blinds can work if your RV window opening matches common residential sizes and the mounting system is compatible. However, house blinds aren't built for the vibration and temperature swings of travel. They'll rattle, wear faster, and may not fit the frame profile of RV windows. RV-specific blinds are designed for these conditions and usually cost only slightly more.

How do I know if I need inside-mount or outside-mount blinds?

Measure the depth of the frame lip. If the lip is at least half an inch deep and the frame is solid, inside-mount works. If the frame is thin, damaged, or has no lip, use outside-mount. Outside-mount is also better if you want the blind to cover the entire wall area around the window for maximum light blocking.

What's the difference between blackout and light-filtering blinds?

Blackout blinds have thick, opaque fabric that blocks nearly all light and heat. Light-filtering blinds have thinner fabric that lets some light through while reducing glare. Blackout blinds are better for bedrooms and sleeping during the day. Light-filtering blinds work in living areas where you want some natural light. Most RV owners use blackout in bedrooms and light-filtering elsewhere.

Do I need to remove the old blind before measuring for the new one?

No. Measure the window opening with the old blind in place. The new blind should fit the same space. You only remove the old blind when you're ready to install the new one. Removing it first doesn't change your measurements.

How long does it take to install blinds in all my RV windows?

Plan 30 to 45 minutes per window for removal and installation if you're comfortable with basic tools. A small RV with four to six windows takes two to three hours total. A larger motorhome with eight to twelve windows takes four to six hours. If you're doing this for the first time, add 50 percent to your time estimate.