What magazine upgrades actually do for a Ruger American Gen 2
The Ruger American Gen 2 comes with a single-stack magazine that holds 10 rounds in 9mm or .45 ACP, depending on your model. An upgrade means replacing it with a higher-capacity magazine or a more reliable aftermarket version. The practical difference is usually between 10 rounds and 17 rounds (9mm) or 10 and 8 rounds (.45 ACP), plus potentially smoother feeding and fewer jams during shooting.
Not every upgrade is worth the money. The factory magazine works fine for most shooters. But if you shoot frequently, carry the gun, or have experienced feeding issues, a better magazine can reduce malfunctions and let you carry more ammunition without reloading. The trade-off is cost—quality magazines run $15 to $30 each, and you may need two or three to notice a real difference in how the gun performs.
Key Takeaways
- The Ruger American Gen 2 factory magazine holds 10 rounds and works reliably for most shooters, so an upgrade is optional rather than necessary.
- Aftermarket options include Mec-Gar, Promag, and Ruger's own higher-capacity magazines, each with different round counts and price points.
- Magazine upgrades cost $15 to $30 per unit and are most useful if you shoot frequently or have experienced feeding problems with the factory version.
- Before buying, confirm your gun's caliber and model year, because 9mm and .45 ACP magazines are not interchangeable.
Which aftermarket magazines fit the Ruger American Gen 2
Mec-Gar makes the most widely recommended upgrade for the Ruger American Gen 2. Their 9mm magazines hold 17 rounds and use a witness hole so you can see how many rounds are loaded without removing the magazine. They feed reliably and cost around $20 to $25. Mec-Gar also makes .45 ACP versions that hold 8 rounds, though the capacity gain is smaller.
Promag offers a cheaper alternative at $12 to $18 per magazine. Their 9mm magazines hold 17 rounds and fit the Ruger American Gen 2, but some shooters report occasional feeding issues, especially with hollow-point ammunition. They work fine for range shooting but are less popular for carry or defensive use.
Ruger's own aftermarket magazines are harder to find but do exist. Some Ruger American Gen 2 owners have reported success with magazines designed for the Ruger Security-9, which share the same magazine well. Check the product listing carefully—not all Ruger magazines cross-fit. A gun shop can confirm compatibility before you buy.
Do not assume a magazine will fit just because it is the right caliber. The Ruger American Gen 2 magazine well is specific, and magazines designed for other pistols (Taurus, Smith & Wesson, or older Ruger models) will not seat properly or may fall out during shooting.
How to check if a magazine will actually work in your gun
The safest way is to test-fit the magazine at a gun shop before paying. Most shops will let you insert an empty magazine into a display gun to confirm it seats fully and does not rattle. If you are buying online, look for product reviews that specifically mention the Ruger American Gen 2 by name—not just "Ruger pistol" or "9mm magazine."
When you receive a new magazine, load it with dummy rounds (snap caps) and cycle them through your gun at home without firing. This reveals feeding problems before you take it to the range. If the magazine causes jams or the rounds nose-dive into the feed ramp, it is not the right fit, and you should return it.
Cost comparison: factory versus aftermarket
A factory Ruger American Gen 2 magazine costs $25 to $35 if you buy it separately from Ruger. A Mec-Gar upgrade costs $20 to $25, so the price difference is small. The value comes from the extra capacity (17 rounds instead of 10 in 9mm) and the witness hole, which the factory magazine lacks.
If you own multiple Ruger American Gen 2 pistols, buying three or four Mec-Gar magazines ($60 to $100 total) is cheaper than buying the same number of factory magazines. Over time, magazines wear out—the spring weakens and rounds stop feeding reliably—so having spares is practical.
When a magazine upgrade actually matters
If you shoot fewer than 500 rounds per year and have never experienced a jam, the factory magazine is sufficient. You do not need an upgrade just because one exists.
An upgrade becomes worthwhile if you carry the gun regularly and want more rounds on board without a reload. It also matters if you have had feeding problems with the factory magazine—some early production Ruger American Gen 2 pistols had magazines with weak springs. Switching to Mec-Gar often fixes the problem.
Competitive shooters and people who practice frequently benefit from having multiple reliable magazines so they can load several at once and spend more time shooting instead of reloading. In that case, buying three Mec-Gar magazines is a practical investment.
Installation and break-in
Magazine installation requires no tools. Remove the empty magazine from your gun, insert the new one until it clicks, and pull down on it to confirm it is seated. That is the entire process.
New magazines sometimes have stiff springs and may be harder to load by hand. This is normal and does not mean the magazine is defective. Load it fully and let it sit for a few days, or cycle rounds through it at the range, and the spring will loosen slightly. If it is still too stiff after 100 rounds, the magazine may be a poor fit for your gun.
Frequently Asked Questions
Can I use Ruger Security-9 magazines in my American Gen 2?
Some shooters report success, but it is not may provide. The magazine wells are similar but not identical. Test-fit at a gun shop before buying, and do not assume compatibility based on brand alone.
Do I need to buy magazines from Ruger, or are aftermarket ones safe?
Aftermarket magazines from Mec-Gar are widely used and considered safe and reliable. Promag is cheaper but has a higher rate of feeding issues. Either is safer than a worn-out factory magazine, but Mec-Gar is the more consistent choice.
What is the difference between 10-round and 17-round magazines?
The 10-round magazine is the factory standard and is legal everywhere. The 17-round magazine holds 70 percent more ammunition but is thicker and may not fit in some holsters. Check your holster before upgrading.
Will a magazine upgrade fix feeding problems?
Often yes, especially if the factory magazine has a weak spring. But if the problem persists with a new Mec-Gar magazine, the issue is likely in the gun itself—the feed ramp or extractor—and a gunsmith should inspect it.
How many magazines should I own?
Two or three is practical: one in the gun and one or two as backups. If you shoot frequently, four or five lets you load multiple magazines at once and spend more time at the range.