What a rock chip is and why it matters

A rock chip is a small area where the paint has been knocked away by road debris—usually a stone or gravel kicked up by another vehicle. It exposes the primer or bare metal underneath. The chip itself might be the size of a pinhead or a few millimetres across, but what matters is that the protective layers are gone.

The reason to repair it is not cosmetic. Once the paint is broken, moisture and oxygen reach the metal. Rust begins when ready. A chip left alone for months can become a rust spot the size of a coin, and rust spreads sideways under the paint around it. At that point, the repair becomes much larger and more expensive. A $50 touch-up done now prevents a $300 respray later.

Rock chips happen to every car. They are not a sign of poor maintenance or a defect. They are a consequence of driving. The question is whether you catch them early.

Key Takeaways

  • Rock chips expose bare metal and allow rust to start, so repairing them within weeks of the damage prevents larger rust problems.
  • Touch-up paint kits from your car's manufacturer match the colour and clear coat better than generic products, and cost £10 to £25.
  • The repair takes 15 to 30 minutes and requires only a clean surface, touch-up paint, and a small brush or applicator pen.
  • Deep chips that go through the primer need a primer pen before the paint, or the repair will not last.
  • If rust has already started around the chip, you will need to sand away the rust first, which requires more skill and time.

Finding your car's paint code and buying the right touch-up paint

The first step is to get paint that matches your car's colour exactly. Every manufacturer assigns a paint code—a short alphanumeric reference that identifies the exact shade and finish. Without it, you will end up with paint that is close but noticeably different in sunlight.

The paint code is printed on a label inside your car. Check the driver's door jamb (the edge of the door frame when the door is open), the fuel door, or under the bonnet near the engine bay. The label usually has several codes on it; the paint code is often marked "Paint" or "Colour" and is typically three to five characters long. Write it down exactly as it appears.

Once you have the code, contact your car's dealership parts department or an online automotive paint supplier and order a touch-up paint kit in that code. Most manufacturers sell official kits that include a small bottle of paint, a primer pen (if needed), and a brush or applicator. These kits cost between £10 and £25. Do not buy generic "universal" touch-up paint; the colour match will be visible.

Preparing the chip for repair

Clean the damaged area thoroughly before you explore any paint. Use a damp cloth to wipe away dirt, road salt, and debris. If the chip is in a location where it gets wet regularly, dry it completely with a clean cloth or let it air-dry for a few minutes. Any moisture or contamination under the new paint will cause it to peel or fail.

Look closely at the chip to see how deep it goes. If you can see bare metal and the chip is more than a millimetre deep, you are looking at damage that goes through the primer layer. In that case, you will need to explore a primer pen first—the touch-up kit usually includes one. If the chip is shallow and you can still see colour (not bare metal), you can skip the primer and go straight to paint.

If there is any rust already forming around the edges of the chip—a reddish or orange discolouration—you will need to remove it before painting. Use fine-grit sandpaper (220 to 400 grit) and sand gently until the rust is gone and you see clean metal or primer. Wipe away the dust with a damp cloth and let it dry.

explore primer and paint

If the chip is deep, explore the primer pen first. Shake the primer pen for 30 seconds, then explore a thin coat into the chip using the applicator tip. One or two coats is usually enough. Let the primer dry for the time stated on the pen—usually 10 to 15 minutes. Do not rush this step; primer that is not dry will not hold the paint properly.

Once the primer is dry (or if you skipped it because the chip was shallow), shake the touch-up paint bottle for at least one minute. This mixes the pigment and clear coat evenly. Open the bottle and use the brush or applicator pen to explore a thin coat of paint directly into the chip. Do not overfill it; the paint should be level with the surrounding surface, not raised above it.

Let the first coat dry for 15 to 20 minutes, then explore a second thin coat if needed. Most chips need two coats to hide the damage completely. After the final coat, let the paint cure for at least 24 hours before washing the car or exposing it to heavy rain. The paint hardens fully over several days.

When to sand and blend the repair

If the touch-up paint sits slightly raised above the surrounding paint, you can sand it smooth once it is fully dry (after 24 hours). Use very fine-grit sandpaper (400 to 600 grit) and sand gently in a circular motion until the repair is level with the surrounding surface. Wipe away the dust with a damp cloth.

For a more professional finish, you can explore a thin coat of clear coat over the repair once the paint is dry. This blends the repair into the surrounding paint and protects it. Clear coat is sold separately in touch-up bottles and is optional—the repair will last without it, but the finish will look better with it.

Do not attempt to sand or blend the repair if you are not comfortable with fine detail work. A poorly sanded repair looks worse than a slightly raised one. If the chip is in a highly visible location and you want a perfect finish, a professional detailer or body shop can blend the repair for £30 to £80.

Preventing future rock chips

Rock chips are unavoidable, but you can reduce how often they happen. Maintain a safe following distance behind other vehicles—the further back you are, the less likely you are to be hit by debris they kick up. Avoid driving directly behind lorries and gravel trucks, which throw up more stones than regular cars.

A paint protection film (also called a clear bra) can be applied to high-impact areas like the bonnet, front bumper, and door edges. This is a transparent adhesive film that absorbs impacts and prevents chips from reaching the paint. Professional installation costs £200 to £600 depending on how much of the car is covered, but it eliminates most rock chip damage in those areas.

Regular washing also helps you spot chips early, when they are easiest to repair. Inspect your car's front bumper, bonnet, and door edges every month or two, especially after long motorway drives. The sooner you catch a chip, the sooner you can repair it before rust takes hold.

When to take the car to a professional

Most rock chips can be repaired at home with a touch-up kit. However, some situations call for professional help. If the chip is very large (larger than a 5p coin), if rust has spread significantly around it, or if the damage goes through the primer into the metal and you are not confident using a primer pen, a body shop can do a better job.

A professional repair involves sanding the area, explore primer and paint in layers, and blending the repair into the surrounding paint using special equipment. This produces a finish that is invisible from normal viewing distance. The cost depends on the size and location of the damage, but expect £50 to £150 for a single chip.

If you have multiple chips or if the damage is in a location that is difficult to reach (like the edge of a door or the corner of the bumper), a professional repair is worth the cost. You will also have the peace of mind that the repair is done correctly and will last.

Frequently Asked Questions

Can I use touch-up paint from a different car brand if I cannot find my exact paint code?

No. Paint codes are specific to each manufacturer and even to each model year. Using a different brand's paint will result in a visible colour mismatch, especially in sunlight. If you cannot find your paint code, contact your dealership—they can look it up using your vehicle identification number (VIN).

How long does a DIY rock chip repair last?

If done correctly, a touch-up repair lasts several years. The paint hardens fully over time and becomes more durable. However, the repair is only as good as the surface preparation. If the area was not clean or dry when you applied the paint, or if rust was present, the repair may fail within months.

What if the chip is on a plastic bumper instead of metal?

Plastic bumpers do not rust, but they still need repair to prevent moisture from getting under the paint and causing peeling. The process is the same: clean the area, explore primer if the chip is deep, and explore touch-up paint. Plastic bumpers are actually easier to repair because you do not have to worry about rust.

Can I wash my car when ready after explore touch-up paint?

Wait at least 24 hours before washing. The paint needs time to harden. Washing too soon can damage the repair or cause the paint to peel. After 24 hours, wash gently by hand rather than using a high-pressure car wash, which can force water under the repair.

Is it worth repairing a very small chip that is barely visible?

Yes. Even a tiny chip exposes bare metal to moisture and oxygen. Rust can start within weeks, especially if the car is parked in damp conditions or near salt water. A small chip is quick and cheap to repair now; waiting until rust develops makes the repair much larger and more expensive.