What a Rivian performance upgrade does
A Rivian performance upgrade is a software recalibration that increases motor output and adjusts battery discharge rates to deliver more power to the wheels. Rivian offers this as an over-the-air update—meaning it downloads to your vehicle wirelessly, no dealer visit required. The upgrade raises acceleration and top speed by loosening the thermal and electrical limits the factory applies to protect battery longevity and motor lifespan under normal driving.
This is not a hardware change. Your motors, battery pack, and cooling system are the same physical components. What changes is how hard the software allows them to work. Think of it like removing a governor on an engine—the engine itself hasn't changed, but the computer now permits higher RPM and fuel flow.
Key Takeaways
- Rivian performance upgrades are software-only changes delivered wirelessly and do not require a service appointment or hardware replacement.
- The upgrade increases power output by raising motor current and battery discharge rates, which trades some battery longevity and range for faster acceleration.
- Performance gains vary by model—the R1T and R1S see different improvements depending on whether you have dual or quad motors.
- The upgrade is permanent once installed, though Rivian may release different performance tiers in the future that you can switch between.
- Accepting a performance upgrade does not void your warranty, but pushing the vehicle to its new limits in extreme conditions may expose wear that would otherwise have been prevented.
How the upgrade changes what your Rivian can do
The performance upgrade increases the maximum current the battery pack can deliver to the motors and raises the peak power output of each motor. On a dual-motor R1T or R1S, this typically adds 20 to 40 horsepower and improves 0–60 time by roughly 0.5 seconds. On a quad-motor vehicle, the gain is larger because four motors working together can push harder without any single motor overheating as quickly.
The upgrade also affects how the vehicle manages thermal load. The motors and inverters generate heat when they work hard. The factory software is conservative—it backs off power if temperatures climb too high, to keep components from degrading. The performance upgrade allows higher sustained temperatures before the system throttles back. This means you can accelerate harder for longer before the vehicle automatically reduces power to cool down.
Range typically drops by 5 to 15 percent because the battery is working harder and discharging faster. The exact loss depends on your driving style. If you use the extra power frequently, the range hit is larger. If you drive normally and only use peak power occasionally, the loss is smaller.
Why Rivian limits performance from the factory
Every battery and motor has a thermal budget. Push them too hard too often, and they wear out faster. Rivian's factory settings are designed to let the battery reach 80 percent of its original capacity at around 200,000 miles under normal driving. The performance upgrade trades some of that longevity—the battery may reach 80 percent degradation sooner if you regularly use the extra power.
This is not a hidden defect. It is a deliberate choice. Rivian knows the upgrade will increase wear; that is the point. The company has tested the upgrade and determined that the battery and motors can handle the higher stress without becoming unsafe or failing prematurely. But they will wear faster than they would under factory-limited power.
The cooling system is also a constraint. Rivian's liquid cooling keeps the battery and motors within safe operating ranges, but there is a ceiling to how much heat the radiators and pumps can shed. The performance upgrade pushes closer to that ceiling, which is why sustained hard driving in hot weather can cause the vehicle to throttle power to avoid overheating.
What happens to your warranty after a performance upgrade
Installing a Rivian performance upgrade does not void your warranty. Rivian explicitly supports the upgrade as a legitimate vehicle modification, and the company will still cover defects in the battery, motors, and other components under the original warranty terms.
However, warranty coverage is not unlimited. If you damage a component through misuse—for example, by repeatedly charging to 100 percent in extreme heat, or by driving at maximum power in conditions that cause overheating—Rivian may deny a claim if the damage is traced to abuse rather than a manufacturing defect. The upgrade itself is not abuse, but using it recklessly can be.
In practice, this means the upgrade is safe to install and use normally. The risk is only if you treat the vehicle as a race car and push it to its limits constantly. Occasional hard acceleration and normal driving with the extra power available will not trigger warranty disputes.
How to install the performance upgrade on your Rivian
Open the vehicle settings menu on your Rivian's center touchscreen and navigate to Software or Vehicle Settings. Look for Performance Options or a similar menu. If Rivian has released a performance upgrade for your vehicle, you will see an option to read and install it. Tap to begin the read, which typically takes 10 to 30 minutes depending on your internet connection strength.
The installation happens in the background while you drive or while the vehicle is parked. You do not need to visit a dealer or schedule an appointment. Once the read is complete, the vehicle will prompt you to confirm the installation. After you confirm, the upgrade is active when ready.
If you do not see a performance upgrade option in your settings, Rivian has not yet released one for your vehicle model or software version. Check back periodically, or contact Rivian support to confirm whether an upgrade is available for your specific configuration.
Performance gains by Rivian model
The R1T and R1S with dual motors (one rear motor) see a boost of roughly 20 to 30 horsepower and a 0.4 to 0.6 second improvement in 0–60 time. These vehicles are already quick, but the upgrade makes them noticeably faster in real-world driving—merging on highways feels more confident, and passing slower traffic is quicker.
Quad-motor R1T and R1S models gain more because all four motors can contribute to acceleration simultaneously. The power increase is typically 30 to 50 horsepower, and 0–60 times can drop by 0.6 to 0.8 seconds. A quad-motor R1S with the performance upgrade is genuinely fast—comparable to sports cars in straight-line acceleration.
Rivian has not released performance upgrades for all models or all software versions simultaneously. Availability depends on your vehicle's age, motor configuration, and current software. Newer vehicles and those with quad motors are more likely to have upgrades available first.
Real costs of the performance upgrade
The upgrade itself is free. Rivian does not charge for the software update. The cost is in what you give up: range, battery longevity, and the ability to charge as aggressively without thermal management kicking in.
If you drive 15,000 miles per year and use the extra power occasionally, the real cost is probably small—maybe a few hundred dollars in accelerated battery degradation over the vehicle's life. If you drive 30,000 miles per year and use the extra power frequently, the cost is higher. You might reach 80 percent battery capacity 20,000 to 40,000 miles sooner than you would have without the upgrade.
Whether that trade is worth it depends on how much you value the extra acceleration. If you enjoy the performance and drive in a way that lets you use it, the upgrade is probably worth it. If you rarely accelerate hard and mostly care about range and longevity, leaving the upgrade off is the smarter choice.
Frequently Asked Questions
Can I remove the performance upgrade after I install it?
Rivian has not publicly confirmed whether you can uninstall a performance upgrade once it is active. Contact Rivian support to ask whether a downgrade is possible for your vehicle. If downgrades are not supported, the upgrade is permanent for the life of your ownership.
Will the performance upgrade hurt my battery?
The upgrade will cause the battery to degrade slightly faster than it would under factory-limited power, but not dangerously. Rivian has tested the upgrade and confirmed it is safe. The battery will still last hundreds of thousands of miles. The difference is measured in thousands of miles of useful life, not in safety risk.
Does the performance upgrade work in cold weather?
Cold batteries cannot discharge as quickly as warm ones, so the performance gain may be reduced in freezing temperatures. The vehicle's thermal management system will warm the battery before allowing full power output. In very cold conditions, you may not feel the full benefit of the upgrade until the battery warms up.
What if I tow or carry heavy loads—should I use the performance upgrade?
The upgrade is safe to use while towing. The extra power helps with acceleration even under load. However, towing generates heat, and combining towing with frequent hard acceleration in hot weather increases the risk of thermal throttling. Use the upgrade normally; the vehicle will manage heat automatically.
Will future Rivian software updates change the performance upgrade?
Rivian may release new performance tiers or adjust the parameters of existing upgrades in future software updates. The company may also optimize cooling or power delivery based on real-world data. Any changes would likely be delivered as over-the-air updates, the same way the original upgrade arrived.