The maintenance required light resets differently depending on your Camry's year and whether you use the dashboard controls or an OBD-II scanner
The maintenance required light on a Toyota Camry is not a warning that something is broken — it is a service reminder that comes on after a set number of miles or months. Once you have completed the maintenance your Camry needs, you have to manually reset the light. The method depends on whether your Camry has a traditional odometer display or a digital instrument cluster, and whether you want to use the steering wheel buttons or a diagnostic scanner.
The light will not turn off on its own, and it will not affect how your car runs. But it will stay on until you reset it, so knowing the right steps for your model year saves you a trip to the dealer.
Key Takeaways
- Most Camrys from 2007 onward can be reset using the steering wheel controls and the odometer display without any tools.
- The exact button sequence varies by year: some models use the trip reset button, others use the menu buttons on the steering wheel.
- If you cannot locate the reset option in your instrument cluster, an OBD-II scanner will clear the light in seconds.
- Resetting the light does not clear any diagnostic trouble codes — it only turns off the service reminder.
- A dealer or independent shop can reset the light for you if you do not want to do it yourself, usually at no charge if they performed the service.
Reset using the steering wheel controls (2007–2019 Camrys)
Most Camrys from 2007 through 2019 can be reset by cycling through the odometer display and holding a button. Start by turning the ignition to the "On" position without starting the engine. Do not press the brake pedal.
Press the trip reset button (or the down arrow on the steering wheel) repeatedly until the odometer display shows "Trip A" or "Trip B" — whichever one is currently displayed. Once you see the trip display, press and hold the trip reset button for three to five seconds. The odometer should flash, and then the maintenance required light on the dashboard will turn off. Release the button and turn off the ignition.
If your Camry has menu buttons instead of a dedicated trip reset button, use the left arrow or down arrow on the steering wheel to navigate to the odometer display, then hold that same button for three to five seconds until the light resets.
Reset using the steering wheel menu (2015–2024 Camrys with digital displays)
Newer Camrys with a full digital instrument cluster use the steering wheel menu system. Turn the ignition to "On" without starting the engine. Use the left arrow or menu button on the steering wheel to scroll through the display options until you see "Maintenance" or "Service Reminder."
Once you highlight the maintenance menu, press the center select button or right arrow to enter that submenu. You should see an option to reset or clear the service reminder. Select it, and the system will ask you to confirm. Press yes or select, and the light will turn off when ready.
If you do not see a maintenance menu option, your Camry may require the odometer method described above, or you may need to use a diagnostic scanner.
Reset using an OBD-II scanner
An OBD-II scanner is a handheld device that plugs into the diagnostic port under your steering wheel (usually on the left side of the column, below the dashboard). The port is a rectangular connector about the size of a USB port. Scanners range from basic $25 models to advanced $200+ units, and many auto parts stores will lend or rent one for free.
Plug the scanner into the port, turn the ignition to "On," and follow the scanner's menu to find the maintenance light or service reminder function. Most scanners have a "Clear" or "Reset" option once you locate it. Select that option, and the light will turn off within seconds. Turn off the ignition and unplug the scanner.
This method works on any Camry model year and does not require you to remember a specific button sequence. It is also the fastest way to reset the light if the steering wheel controls are not working or if you cannot locate the reset option in your cluster.
What the maintenance required light actually means
The maintenance required light comes on based on mileage intervals set by Toyota, not because a sensor detected a problem. It typically appears every 10,000 miles for oil changes, or at longer intervals for other services like transmission fluid or air filter replacement. The light is purely a reminder — it does not indicate that your car has a fault or that something is failing.
Before you reset the light, make sure you have actually completed the service the light is reminding you about. If you reset it without doing the maintenance, you will lose track of when your next service is due. Check your owner's manual or your service records to confirm what work needs to be done at the current mileage.
When to have a shop reset the light for you
If you had your Camry serviced at a Toyota dealer or independent shop, ask them to reset the light before you leave. Most shops will do this at no extra charge as part of the service. If you took your car to a shop and the light is still on, call them and ask them to reset it — it takes less than a minute.
If you are uncomfortable using the steering wheel controls or do not have access to a scanner, a shop can reset it for you in under five minutes. Some shops charge a small diagnostic fee (usually $15 to $50) if you did not have service done there, but many will do it for free if you ask.
Resetting the light does not clear diagnostic codes
The maintenance required light is separate from the check engine light. Resetting the maintenance light using any of the methods above will turn off only the service reminder — it will not clear any diagnostic trouble codes or turn off a check engine light if one is on.
If your Camry has both a maintenance required light and a check engine light, you need to address the check engine light separately. That light indicates an actual fault in the engine, emissions, or transmission system and requires a scanner to read the code and diagnose the problem. Do not ignore a check engine light by resetting it without fixing the underlying issue.
Frequently Asked Questions
Will the maintenance required light come back on after I reset it?
Yes. The light will come back on after another 10,000 miles (or whatever interval Toyota has set for your model year). This is normal. Each time you reach the service interval, the light will turn on again as a reminder to perform maintenance.
Can I reset the maintenance light while the engine is running?
No. Turn the ignition to "On" but do not start the engine. If the engine is running, the steering wheel controls and odometer display will not respond to the reset sequence. Turn off the engine, wait a few seconds, and try again with the ignition in the "On" position only.
What if the reset button does not work or the light stays on?
Try the sequence again, making sure you are holding the button for the full three to five seconds. If it still does not work, your instrument cluster may have a different reset method — check your owner's manual for your specific year. If the manual does not help, use an OBD-II scanner or take your Camry to a shop to have them reset it.
Is there a difference between the maintenance required light and the check engine light?
Yes. The maintenance required light is a service reminder based on mileage and turns on automatically at set intervals. The check engine light indicates a fault in the engine, emissions, or transmission system and requires diagnosis. You can reset the maintenance light yourself, but a check engine light should be scanned to find out what is wrong.
Do I need to go to a Toyota dealer to reset the light?
No. You can reset it yourself using the steering wheel controls or a scanner, or you can have any shop do it. Dealers are not required, and independent shops can reset the light just as easily.