Motor mount replacement typically costs between $200 and $800 per mount, depending on which mount needs replacement, your vehicle's make and model, and whether you go to a dealership or independent shop.

A motor mount is a rubber-and-metal component that holds your engine in place and absorbs vibration. Most vehicles have three to four mounts. When one fails, you'll notice excessive engine vibration, clunking sounds when accelerating or braking, or visible engine movement under the hood. Replacing just the failed mount costs less than replacing all of them at once, but labor time varies widely because some mounts are easier to access than others.

The price you pay depends on four main factors: which specific mount has failed, your vehicle's year and model, whether you choose a dealership or independent mechanic, and whether the shop finds additional damage while doing the work. A front engine mount on a Honda Civic costs far less to replace than a rear mount on a Dodge Ram, because the Ram's mount sits deeper in the engine bay and requires more disassembly.

Key Takeaways

  • Motor mount replacement ranges from $200 to $800 per mount, with labor making up 50 to 70 percent of the total cost.
  • The location of the failed mount matters more than the part itself—rear and side mounts often require more labor time than front mounts.
  • Dealerships typically charge 20 to 40 percent more than independent shops for the same work, though they may use OEM parts.
  • Delaying replacement can damage other engine components and lead to transmission problems, making the repair more expensive later.

How labor time affects the total bill

Labor is where motor mount replacement costs diverge most. A straightforward front mount replacement might take one to two hours at an independent shop, while a rear mount on the same vehicle could take three to five hours because the technician must remove other components to reach it. Shops charge between $75 and $150 per hour for labor, so a straightforward job might cost $150 in labor while a complex one costs $600 or more.

Some vehicles require engine removal or partial engine bay disassembly to access certain mounts. Luxury vehicles and trucks with tight engine compartments fall into this category. If your shop quotes you five or more hours of labor for a single mount, ask whether the estimate includes removal of other parts like the intake manifold, alternator, or transmission cooler lines. That detail explains why the labor time is so high.

Dealership versus independent shop pricing

Dealerships typically charge $100 to $180 per hour for labor, while independent shops charge $75 to $130. For a two-hour job, that difference adds $50 to $100 to your bill. Dealerships use original equipment manufacturer (OEM) parts, which cost more than aftermarket alternatives but carry a warranty that covers both the part and the installation.

Independent shops usually offer a choice: OEM parts at a markup, or aftermarket parts at a lower cost. A quality aftermarket motor mount costs $50 to $150, while an OEM mount runs $100 to $300. The labor cost is the same either way. If your vehicle is still under warranty, check your warranty documents—some require dealership service for certain repairs, though motor mounts are rarely included in powertrain warranties.

What happens if you delay the repair

A failed motor mount does not stop your engine from running, so some drivers put off replacement. This is a false economy. Excessive engine movement can damage engine oil lines, coolant hoses, and the transmission. If the engine shifts far enough, it can contact the frame or radiator support, creating damage that costs thousands to repair.

Continuing to drive on a failed mount also accelerates wear on the remaining mounts. If one mount fails, the others absorb extra stress. Replacing all mounts at once when one fails costs less than replacing them one at a time over the next year. Ask your mechanic whether replacing the other mounts during the same service would be cost-effective given your vehicle's age and mileage.

Signs that a motor mount has failed

The most common sign is a clunking or banging sound from the engine bay when you accelerate hard, brake suddenly, or shift into gear. You might also see the engine visibly rock side to side when you're stopped at a red light and rev the engine slightly. Some drivers report a rhythmic thumping that gets worse when the engine is cold.

Excessive vibration throughout the cabin, especially in the steering wheel or floor, can also point to a failed mount. If you notice any of these signs, have a mechanic inspect the mounts before you drive the vehicle extensively. A visual inspection takes 15 minutes and costs nothing at most shops; a technician can often spot a cracked or separated mount by looking at it.

Getting an accurate quote before you commit

When you call a shop, tell them which symptoms you're experiencing and ask them to diagnose which mount has failed before quoting a price. A shop that quotes you without inspecting the vehicle is guessing. Request a written estimate that breaks down the part cost, labor hours, and any additional work they discovered during inspection.

If the estimate seems high, get a second opinion from another shop. Motor mount replacement is straightforward enough that prices should be comparable between shops in your area. If one shop quotes significantly more labor time than another, ask why—it may be legitimate, or it may be padding. Ask whether the estimate includes a warranty on the work; most independent shops offer 12 months or 12,000 miles.

Aftermarket versus OEM parts: what the difference means

OEM mounts are made by your vehicle's manufacturer or a supplier they approve. They match the original specifications exactly and usually come with a warranty from the dealership. Aftermarket mounts are made by third-party companies and vary in quality—some are excellent, others fail quickly.

For a vehicle with high mileage or one you plan to keep for many more years, an OEM mount is worth the extra cost because it's more likely to last as long as the other mounts. For a vehicle you're planning to sell or trade in within a year, an aftermarket mount from a reputable brand (like Prothane or Energy Suspension) is a reasonable choice. Ask your mechanic which brands they trust; they'll have seen which ones fail prematurely on your vehicle type.

Frequently Asked Questions

Can I replace just one motor mount or do I have to replace them all?

You only need to replace the mount that has failed. However, if your vehicle has high mileage and the other mounts are original, ask your mechanic whether replacing them all at once makes sense. The labor cost to replace a second mount while the engine bay is already open is often 30 to 50 percent less than replacing it separately later.

How long does motor mount replacement take?

A straightforward replacement takes one to two hours. Complex replacements requiring engine removal or extensive disassembly can take four to six hours. Ask your shop for an estimated completion time when you drop off the vehicle; most shops can complete the work the same day if you bring it in early.

Will my check engine light come on if a motor mount fails?

Not usually. A failed motor mount triggers vibration and noise, not a diagnostic trouble code. If your check engine light is on, that's a separate issue. However, severe engine movement from a failed mount can eventually damage sensors or wiring, which would trigger a code.

Is motor mount replacement covered by my car's warranty?

Motor mounts are typically covered under powertrain warranties for three years or 36,000 miles, whichever comes first. Check your warranty paperwork or contact your dealership to confirm. If you're still under warranty, have the work done at the dealership to may support the warranty remains valid.

What's the difference between a motor mount and an engine mount?

They're the same thing. Motor mount, engine mount, and engine support are all names for the same component. Some shops use the terms interchangeably, so don't be confused if a technician uses different wording.