What a catch can is and why Motion Raceworks makes them

A catch can is a small tank that sits between your engine's crankcase vent and the intake system. It collects oil vapors and condensation that your engine normally sends back into the intake manifold — a process called positive crankcase ventilation, or PCV. Motion Raceworks manufactures catch cans designed to trap that moisture and oil before it reaches your engine, which some owners believe reduces carbon buildup and keeps the intake cleaner over time.

Motion Raceworks catch cans are aluminum tanks with internal baffles and drain plugs. They come in different sizes and configurations depending on your vehicle's engine type. The company markets them as performance and maintenance products, though the actual benefit varies based on your driving habits, engine condition, and how often you service the can itself.

Whether a catch can is worth installing depends on what problem you're trying to solve. If you're concerned about long-term carbon deposits or you drive in conditions that produce a lot of blow-by (unburned fuel and combustion gases escaping past the piston rings), a catch can may help. If your engine runs normally and you maintain regular oil changes, the difference may be small enough that you won't notice it.

Key Takeaways

  • A catch can collects oil vapors and moisture from your crankcase before they enter the intake system, which some owners believe reduces carbon buildup.
  • Motion Raceworks catch cans require regular draining — typically every 500 to 1,000 miles depending on driving conditions — or they become ineffective and may cause problems.
  • Catch cans are legal for street use in most states, but some regions restrict them because they alter the emissions system; check your local regulations before installing one.
  • A catch can is most useful if you drive aggressively, tow frequently, or have an older engine with higher blow-by, and least useful if you drive conservatively and change your oil on schedule.
  • Installation typically costs $200 to $500 in labor depending on engine bay layout, plus the cost of the catch can itself, which ranges from $100 to $400.

How a catch can actually works inside your engine

Your engine produces blow-by — a mixture of unburned fuel, combustion gases, and oil vapor — that escapes past the piston rings during combustion. Without a way to vent this pressure, it would build up and damage seals. The PCV system routes this vapor back into the intake manifold so it gets burned again during the next combustion cycle. This is normal and necessary.

The problem is that this vapor carries oil particles and moisture. When it enters the intake manifold, some of that oil sticks to the intake valves and fuel injectors, building up carbon deposits over time. On direct-injection engines (which spray fuel directly into the cylinder rather than into the intake), this carbon buildup can be especially problematic because the intake valves don't get cleaned by fuel spray anymore.

A catch can intercepts the PCV line before it reaches the intake. The vapor enters the can, where baffles slow it down and allow heavier oil droplets to fall to the bottom. The can collects this liquid, and cleaner vapor continues to the intake. Motion Raceworks cans use internal chambers and mesh screens to improve separation, though the basic principle is the same across most brands.

The catch can does not eliminate blow-by — it only removes some of the oil and moisture from it. You still need a functioning PCV system, and the catch can works alongside it, not instead of it.

Installation, maintenance, and what to expect

Installing a Motion Raceworks catch can involves tapping into the PCV line between your crankcase and intake manifold. The exact location and difficulty depend on your engine layout. Some vehicles have straightforward access and straightforward routing; others require removing air boxes, intake manifolds, or other components. A shop familiar with your vehicle's engine can usually complete the job in one to three hours.

The critical part of catch can ownership is maintenance. You must drain the collected oil regularly — typically every 500 to 1,000 miles, though this varies based on how much blow-by your engine produces. If you don't drain it, the can fills up, pressure backs up, and the system stops working. In some cases, an overfull catch can can push oil back into the engine or create vacuum leaks that cause rough idle or check engine lights.

Draining is straightforward: locate the drain plug at the bottom of the can, place a container underneath, and open it. The liquid that comes out is a mix of oil and water — dispose of it as you would used oil. Wipe the can clean and close the plug. This is a task you can do yourself in a few minutes, or a shop can do it during regular service.

Some Motion Raceworks cans include a sight glass so you can see the fluid level without opening the can. This makes it easier to know when draining is needed. Others require you to check by opening the drain plug slightly or removing the top cap.

Whether a catch can actually reduces carbon buildup

The claim that catch cans reduce carbon deposits is based on sound logic — if you remove oil from the PCV vapor, less oil reaches the intake valves, so less carbon should build up. Real-world results are harder to measure and vary significantly by engine type and driving style.

On direct-injection engines, where intake valve carbon is a known issue, some owners report cleaner valves after years of catch can use. On port-injection engines, where fuel spray already cleans the intake valves, the benefit is smaller. On older engines with high blow-by, a catch can may make a noticeable difference. On newer, well-maintained engines with low blow-by, the difference may be negligible.

The problem is that no independent testing organization regularly publishes catch can results, and individual owner reports are anecdotal. You won't know whether a catch can helped your specific engine until you remove the intake valves years later and compare them to what they might have looked like without one — which is impossible to do.

What is certain is that a catch can does not hurt a properly functioning engine, and it does remove oil from the PCV system. Whether that translates to meaningful long-term benefit depends on your engine, your driving, and your maintenance habits.

Legal status and emissions system concerns

In most states, a catch can is street-legal because it does not prevent emissions from being burned — it only removes oil from them before they re-enter the engine. The vapor still gets burned during combustion, so the catch can is not considered an emissions bypass.

However, some states and emissions testing programs take a stricter view. California, for example, has specific rules about modifications to the PCV system, and some catch can installations may not pass inspection depending on how they're plumbed. A few states classify any modification to the emissions system as illegal, even if it doesn't reduce emissions.

Before installing a Motion Raceworks catch can, check your state's emissions regulations or contact your local inspection station. If you live in an area with strict emissions testing, ask the shop installing the can whether it will pass inspection in your region. Some installations can be done in a way that allows you to remove the catch can quickly if needed for testing.

Cost and whether it's worth the investment

A Motion Raceworks catch can typically costs between $100 and $400 depending on the model and your engine type. Installation labor usually runs $200 to $500, though some shops charge more if your engine bay is tight or the PCV line is difficult to access. You may also need hoses, fittings, and clamps, which add another $20 to $50.

Total installed cost is usually $400 to $900. Over the life of the catch can, you'll also spend time and money on regular draining — either doing it yourself or paying a shop $30 to $50 per drain.

Whether this investment makes sense depends on your situation. If you drive aggressively, tow, or have an older engine known for carbon buildup, the cost may be justified by the potential benefit. If you drive conservatively, change your oil on schedule, and have a newer engine, the benefit may not be worth the cost and ongoing maintenance.

Think of a catch can as preventive maintenance with uncertain payoff, not as a repair for an existing problem. If your engine is already running rough or your fuel economy has dropped, a catch can is unlikely to fix it — you should diagnose the actual problem first.

Alternatives to a catch can for reducing carbon buildup

If you're concerned about carbon deposits but don't want to install a catch can, other options exist. Regular oil changes with quality oil reduce the amount of sludge in your crankcase, which means less contamination in the PCV vapor. Using top-tier gasoline with detergents helps keep fuel injectors and intake valves cleaner. Some owners use fuel system cleaners periodically, though their effectiveness is debated.

For direct-injection engines specifically, professional intake valve cleaning services can remove existing carbon buildup. This is more expensive than a catch can (typically $300 to $800) but addresses the problem directly rather than preventing future buildup. Some shops recommend this service every 50,000 to 100,000 miles on high-mileage direct-injection engines.

Driving habits also matter. Aggressive driving, frequent short trips, and towing all increase blow-by and carbon formation. Conservative driving and longer highway trips reduce both. If you can change your driving patterns, you may reduce carbon buildup without any equipment.

Frequently Asked Questions

Will a catch can void my vehicle's warranty?

It depends on your manufacturer and what goes wrong. If the catch can itself fails or causes a problem directly related to it, the manufacturer may deny a warranty claim for that component. However, if an unrelated part fails, the catch can alone won't void your entire warranty. Check your warranty documentation or contact your dealer before installation if you're concerned.

Can I install a catch can myself if I'm comfortable working on engines?

Yes, if you have the right tools and your engine layout allows access to the PCV line. You'll need hoses, fittings, clamps, and basic hand tools. The hardest part is usually routing the hose cleanly and ensuring all connections are tight. If you're unsure about any step, have a shop do it — a loose connection can cause vacuum leaks or oil leaks.

How often do I really need to drain the catch can?

Every 500 to 1,000 miles is typical, but it depends on your engine's blow-by. Check the fluid level every few hundred miles at first to see how fast it fills up. Some engines produce very little blow-by and may only need draining every 2,000 miles. Others with high blow-by may need it every 300 miles. Use your sight glass or drain plug to check regularly.

What happens if I forget to drain the catch can?

If it fills completely, pressure backs up and the system stops working. Oil may be pushed back into the engine, or air may be drawn in, creating a vacuum leak. This can cause rough idle, hesitation, or a check engine light. Drain it as soon as you notice, and the problem should resolve. If it happens repeatedly, you may need to drain more frequently or investigate whether your engine has excessive blow-by.

Does a catch can work on turbocharged or supercharged engines?

Yes, and turbocharged engines often benefit more because they produce higher blow-by due to increased cylinder pressure. Supercharged engines also produce more blow-by than naturally aspirated ones. A catch can on a forced-induction engine may fill up faster, so you'll need to drain it more frequently. Make sure the catch can you choose is rated for your engine's boost level.