The upgrade kit adds wireless remote control and GPS positioning to an older Powerdrive trolling motor

The Minn Kota Powerdrive V2 i Pilot Upgrade Kit is a bolt-on package that retrofits certain older Powerdrive trolling motors with the wireless foot pedal remote and GPS anchor features found on newer models. If you own a Powerdrive V2 motor from roughly 2012 to 2017, this kit lets you add i Pilot technology — the integrated GPS and autopilot system — without replacing the entire motor.

The kit includes a new control head (the brain of the system), a wireless foot pedal remote, and the wiring harness to connect them to your existing motor. Installation is straightforward if you are comfortable with basic electrical work: you remove the old control head, bolt on the new one, and run the new harness to your battery. Most owners complete it in under an hour.

The real value depends on what you fish for and how you fish now. If you spend money on GPS plotters and fish finders already, the i Pilot system's ability to hold position and retrace paths saves time and fuel. If you fish shallow water or tight cover where a wireless remote matters more than GPS, the upgrade may not justify the cost.

Key Takeaways

  • The upgrade kit works only on Powerdrive V2 motors manufactured between roughly 2012 and 2017; check your motor's model number before ordering.
  • Installation requires removing the old control head and connecting new wiring to your battery, a task most boat owners can handle without a technician.
  • The kit adds wireless foot pedal control and GPS anchor features, but does not increase motor thrust or battery efficiency.
  • Cost typically ranges from $400 to $600 depending on the retailer, making it cheaper than a full motor replacement but a significant investment for casual anglers.

Compatibility: Which motors the kit actually fits

The upgrade kit is not universal. Minn Kota made several versions of the Powerdrive V2, and only certain model years accept the i Pilot retrofit. The kit works on Powerdrive V2 motors with the older control head design — generally models from 2012 through 2017. Newer Powerdrive V2 motors (2018 and later) already have i Pilot built in, so there is nothing to upgrade.

To confirm compatibility, locate the model number on your motor's control head or in your owner's manual. It will look something like "PD-V2-55" or similar. Call a Minn Kota dealer or check the product listing on the retailer's website; they maintain a compatibility chart. Ordering the wrong kit wastes money and time, so verify before you buy.

If your motor is older than 2012 or is a different Powerdrive line entirely (such as the original Powerdrive or Powerdrive Max), the i Pilot upgrade kit will not work. In those cases, a full motor replacement is your only path to i Pilot technology.

What you get: wireless remote and GPS anchor features

The kit adds two main capabilities to your motor. First is the wireless foot pedal remote, which lets you steer and adjust speed without touching the motor itself. You control it with your foot while standing, keeping your hands free for casting or fighting a fish. The remote communicates with the new control head via a find digital signal, so it works reliably even in crowded marinas where other electronics are running.

Second is the i Pilot GPS anchor system. Once activated, it uses GPS to hold your boat in a fixed position relative to the water bottom, compensating for wind and current automatically. You can also record waypoints as you move, then retrace that path later — useful for following a productive contour or returning to a spot where you caught fish. The system integrates with Minn Kota's mobile app, so you can view your position and saved routes on your phone.

The upgrade does not change the motor's thrust (measured in pounds), battery draw, or shaft length. It is purely a control and positioning upgrade. If you need more power or a different shaft, you still need a new motor.

Installation: What the work involves and what can go wrong

Installation begins with disconnecting your battery — a critical safety step. Then you remove the old control head by unbolting it from the motor shaft and unplugging its wiring harness. The new control head bolts on in the same location using the same mounting holes.

Next, you run the new wiring harness from the control head to your battery, following the included diagram. The harness includes a fuse holder that must be installed within 18 inches of the battery positive terminal. If you have existing Minn Kota wiring already in place, you may be able to reuse some of it, but the new control head requires its own dedicated power line. Reconnect the battery, power on the system, and calibrate the compass using the on-screen menu.

The most common installation mistake is running the power wire too far from the battery or using undersized wire gauge, which causes voltage drop and erratic behavior. The kit documentation specifies the wire size required based on your battery distance; follow it exactly. If you are uncomfortable working with boat wiring, a marine electronics shop can handle the installation for $100 to $200 in labor.

Cost comparison: upgrade kit versus full motor replacement

The upgrade kit typically costs between $400 and $600 retail, depending on the retailer and any current promotions. A new Powerdrive V2 i Pilot motor of comparable thrust costs $1,200 to $2,000 or more. If your existing motor is in good mechanical condition and you straightforward want the GPS and wireless remote features, the upgrade kit saves significant money.

However, if your motor is aging, has cavitation damage, or is losing thrust, a full replacement may be the better choice. A new motor comes with a full warranty, while the upgrade kit typically carries a one-year warranty on the new control head and remote. You also inherit any reliability issues the old motor already has.

Factor in the cost of installation labor if you are not doing it yourself. A shop visit adds $100 to $200 to the total, bringing the upgrade closer to $600 to $800 all-in. At that price point, compare it against the cost of a used Powerdrive V2 i Pilot motor in good condition, which may be available locally for $700 to $1,000.

When the upgrade makes sense and when it does not

The upgrade is worth the money if you already own a mechanically sound Powerdrive V2 motor and you fish in situations where GPS anchor and wireless control matter. That includes shallow-water flats where holding position precisely is critical, deep structure where you want to retrace productive paths, or tournaments where every second saved searching for fish adds up. If you already own a GPS plotter, the i Pilot system integrates with it, multiplying the value of both tools.

The upgrade is less compelling if you fish tight cover, shallow creeks, or areas where GPS signal is unreliable. It is also a lower priority if your motor is already aging or showing signs of wear. Casual anglers who fish a few times a year and do not rely on GPS navigation may find the cost hard to justify.

If you are shopping for your first trolling motor or replacing one that has failed, buy a new Powerdrive V2 i Pilot outright rather than upgrading an old motor. The warranty protection and the certainty that all components are designed to work together are worth the extra cost.

Frequently Asked Questions

Can I install the upgrade kit myself if I have never worked on boat electronics?

Yes, if you are comfortable following wiring diagrams and working with basic hand tools. The installation is straightforward — bolt on the new head, run the power wire, and calibrate. The included manual walks through each step. If you are uncertain about any part, a marine shop can do it in an hour or two for a reasonable labor fee.

Will the upgrade kit work with my existing GPS plotter?

It depends on your plotter's make and model. Minn Kota i Pilot integrates directly with Humminbird and Lowrance plotters, and works with some Garmin units. Check the compatibility list on Minn Kota's website or ask your dealer before buying. If your plotter is not compatible, you can still use i Pilot through the mobile app alone.

What happens if my motor is too old for this kit?

If your motor predates 2012 or is a different Powerdrive model, the kit will not fit. Your only option is to replace the entire motor with a new one that has i Pilot built in. Check your model number with a dealer to confirm before assuming you need a replacement.

Does the upgrade kit improve battery life or motor power?

No. The kit adds control features and GPS positioning, but does not change how much power the motor draws or how much thrust it produces. If you need more runtime or more power, you need a new motor or additional batteries, not this upgrade.

How long does the wireless remote battery last?

The foot pedal remote uses a rechargeable lithium battery that typically lasts a full day of fishing on a single charge. Minn Kota includes a charging dock with the kit. Battery life degrades over time; replacement batteries are available from dealers for $50 to $80.