Walmart can copy most car keys at its in-store service desk, and the process takes about five minutes

Walmart's photo and keys department offers key copying for standard car keys, house keys, and padlock keys. You bring your original key to the service desk (usually near the photo lab), hand it to an associate, and they run it through a key-cutting machine. For a basic car key without electronic components, the cost is typically between $2 and $6, depending on the key type and your location. The copy is ready while you wait.

This works well for older mechanical keys—the kind that are just shaped metal with no chip or button. If your car key has a black plastic head with buttons, a chip inside it, or a remote fob attached, Walmart cannot copy it. Those require a dealership or a locksmith who has programming equipment.

Key Takeaways

  • Walmart copies mechanical car keys at the service desk for $2 to $6, and the copy is ready in about five minutes.
  • Key copying only works for keys without electronic chips, remote buttons, or fob components.
  • Bring your original key to the photo lab or service desk and ask for key copying; no advance notice is needed.
  • If your key has a plastic head or buttons, you will need a dealership or automotive locksmith instead.

What types of car keys Walmart can and cannot copy

Walmart's key-cutting machine works on mechanical keys only—metal keys with a straightforward cut pattern and no electronics. Most cars made before the mid-1990s have these keys. If you own an older vehicle or have a spare mechanical key from an older car, Walmart can copy it.

Walmart cannot copy transponder keys (keys with a chip embedded in the plastic head), smart keys (keyless entry fobs), proximity keys (push-button start keys), or switchblade keys (keys that fold into the handle). These all contain electronics that need to be programmed to your specific vehicle. Attempting to copy one of these at Walmart will produce a key that looks right but will not start your car or unlock the doors.

To know which type you have, look at your key. If it is all metal with a straightforward cut edge and no plastic head or buttons, Walmart can copy it. If there is any plastic, any button, or any electronic component, you need a locksmith or dealership.

How to order a key copy at Walmart

Walk into any Walmart with your original key and go to the service desk or photo lab area. These are usually near the back of the store or along the front wall. Tell the associate you need a key copy. Hand them your original key—they do not need anything else from you, though having your name ready helps if they ask.

The associate will place your key in the key-cutting machine, which traces the cuts and reproduces them on a blank key. This takes two to five minutes. You pay at the register, and the copy is yours to take home when ready. No appointment is needed, and you do not have to wait for mail or shipping.

If the service desk is busy, you may wait 10 to 20 minutes, but the actual cutting time is very short. Some Walmart locations close their service desk in the evening, so if you are going after 8 p.m., call ahead to confirm they are still open.

Cost and location differences

The price of a key copy at Walmart ranges from about $2 to $6 per key. Standard house keys and straightforward car keys are usually on the lower end. Specialty blanks—such as keys for older locks or unusual key shapes—may cost more. Prices vary slightly by location and by the specific type of blank the machine needs to use.

Not every Walmart location offers key copying. Smaller stores or those in rural areas may not have a service desk with a key-cutting machine. Before you drive to Walmart, call the store directly or check its website to confirm that key copying is available. You can also ask at the service desk when you arrive; if they cannot do it, they can often direct you to a nearby locksmith who can.

When to use Walmart versus a locksmith or dealership

Use Walmart for quick, inexpensive copies of mechanical keys when you need a spare in a hurry and do not want to pay locksmith prices. It is the fastest and cheapest option for straightforward keys.

Use a locksmith if your key has any electronic component, if Walmart cannot copy it, or if you need the copy programmed to your vehicle. Locksmiths have more advanced equipment and can handle transponder keys, smart keys, and other modern key types. They cost more—usually $50 to $200 depending on the key type—but they can actually make a working copy.

Use your car's dealership if you have lost all copies of your key and need a new one programmed from scratch, or if you need multiple copies of a modern key. Dealerships have your vehicle's records and can create and program keys correctly. This is the most expensive option but the most reliable for newer vehicles.

What to do if your key is damaged or worn

If your original key is bent, corroded, or worn down, Walmart may not be able to copy it accurately. A damaged key can produce a copy that does not fit smoothly into the lock or turn properly. Before you go to Walmart, test your original key in your car's ignition and door lock to make sure it works smoothly. If it sticks, grinds, or does not turn all the way, the copy may have the same problem.

If your original key is damaged, a locksmith can often repair it or create a new copy from your vehicle's lock cylinder directly, without needing a working key. This costs more than a Walmart copy but solves the problem if your only key is worn out.

Frequently Asked Questions

Can Walmart copy a key with a rubber grip or plastic head?

Only if the plastic is just a grip on a mechanical key with no electronics inside. If the plastic head contains a chip, buttons, or any electronic component, Walmart cannot copy it. Ask the associate to look at it before you pay; they can tell you whether the machine can handle it.

How long does a key copy take at Walmart?

The actual cutting takes two to five minutes. If the service desk is busy, you may wait 10 to 20 minutes before an associate is free to help you. The copy is ready to take home the same day.

What if Walmart's machine breaks my original key?

This is very rare, but if it happens, tell the associate when ready. Most Walmart locations will replace the damaged key or refund your money. Keep your receipt in case you need to return.

Can I copy a key that is not mine?

Walmart does not ask for proof of ownership, so technically you can bring any key. However, copying someone else's key without permission is illegal. Walmart associates may refuse if they suspect the key is not yours.

What if my car key has a remote fob attached?

Walmart can copy only the mechanical part of the key if it is detachable from the fob. The fob itself cannot be copied and must be programmed by a dealership or locksmith. If the key and fob are one piece, Walmart cannot help.