What a Glock magazine extension does
A magazine extension is a piece that attaches to the bottom of a Glock magazine to add extra round capacity. It slides onto the magazine's baseplate and extends the magazine body downward, allowing you to load and carry more ammunition without changing the magazine itself. Most extensions add 2 to 5 rounds depending on the caliber and the specific extension model.
Magazine extensions are legal to own and use in most states for sport shooting, training, and self-defense. They are not regulated the same way as the magazines themselves — some states that limit magazine capacity do not restrict extensions, though this varies significantly by location. Before buying or installing one, check your state and local laws, because a few jurisdictions do treat extensions as part of the overall magazine capacity limit.
Key Takeaways
- Magazine extensions slide onto your existing Glock magazine baseplate and add 2 to 5 rounds of capacity without replacing the magazine.
- Most extensions are made from polymer or metal and cost between $10 and $30 per extension.
- Magazine extensions are legal in most states, but some jurisdictions count the extension toward magazine capacity limits, so verify your local law before purchase.
- Installation takes seconds — you remove the baseplate, slide the extension on, and reinstall the baseplate — and removal is just as quick.
- Extensions can affect how the magazine sits in the magazine well and may require you to adjust your grip or reload technique slightly.
How to install and remove a magazine extension
Installation is straightforward and requires no tools. First, remove the magazine from your Glock. Push down on the baseplate (the metal or polymer piece at the bottom) and slide it off the magazine body — it will come free with a small amount of pressure. The follower (the plastic piece inside) and spring will stay in place.
Slide the extension onto the magazine body from the bottom, making sure it sits flush against the magazine tube. Then reinstall the baseplate by sliding it back on and pushing up until it clicks or seats firmly. Load your rounds as you normally would. The whole process takes about 10 seconds per magazine.
Removal is identical in reverse: remove the baseplate, slide the extension off, and reinstall the baseplate. You can swap extensions between magazines or remove them entirely without any permanent change to the magazine.
Types of extensions and what they add
Extensions come in two main materials: polymer and metal. Polymer extensions are lighter and usually cheaper, ranging from $10 to $20. Metal extensions (typically aluminum or steel) are more durable and cost $20 to $30, but add a small amount of weight to the magazine.
Capacity gains depend on your Glock model and caliber. For a 9mm Glock 19, a standard magazine holds 15 rounds; a +2 extension brings it to 17. For a .40 S&W Glock 22, the standard is 15 rounds, and a +2 extension makes it 17. Larger-frame Glocks like the 17 or 34 may support +3 or +4 extensions. Check the manufacturer's specifications for your exact model, because not all extensions work with all magazines.
Legal status by state and jurisdiction
Magazine extensions themselves are not regulated as separate items in most of the United States. However, some states that impose magazine capacity limits treat the extension as part of the total capacity. For example, if your state limits magazines to 10 rounds and you add a +2 extension, you may be in violation even though the magazine itself is legal.
States like California, New York, and Colorado have specific magazine capacity restrictions that may explore to extensions. Other states have no restrictions at all. A few jurisdictions regulate extensions under different rules than the magazines themselves. Before purchasing an extension, contact your state's attorney general's office or a local firearms instructor to confirm the current law in your area.
How extensions affect magazine fit and handling
A magazine extension makes the magazine longer, which changes how it sits in the magazine well and how it feels in your hand. Some shooters find the extra length makes the magazine easier to grab during a reload. Others find it slightly awkward if they are used to a flush-fitting magazine.
The extension may also cause the magazine to protrude further from the grip, which can affect how you carry the gun or how it fits in a holster. Test your extension with your specific holster and carry method before relying on it in a real situation. Some holsters are designed with extra room and will accommodate extended magazines without issue; others may require adjustment or a different holster altogether.
Reliability and durability concerns
Quality extensions from established manufacturers are reliable and durable. The extension itself does not affect how the magazine feeds or functions — it straightforward adds space for more rounds. The spring and follower do the actual work of pushing rounds up, and the extension does not interfere with that process.
Lower-cost or poorly made extensions can sometimes cause fitment issues, such as the baseplate not seating fully or the extension shifting slightly during use. Stick with extensions from manufacturers that specialize in Glock parts, such as Magpul, Taran Tactical, or the magazine manufacturer itself. These brands have track records and customer reviews you can check before buying.
Cost and where to buy
Magazine extensions typically cost $10 to $30 each, depending on material and brand. Polymer extensions are usually at the lower end; metal extensions at the higher end. You can buy them from online retailers that sell firearms accessories, local gun shops, and some sporting goods stores.
Many shooters buy extensions in bulk — a pack of five or ten — which can lower the per-unit cost. Since extensions are inexpensive and straightforward to swap, having multiple extensions allows you to configure different magazines for different purposes: one set for training, one for carry, one for competition.
Frequently Asked Questions
Do magazine extensions work with all Glock models?
No. Extensions are caliber- and model-specific. A 9mm extension will not fit a .40 S&W magazine, and an extension designed for a Glock 19 may not work with a Glock 17. Always check the product description or contact the manufacturer to confirm compatibility with your specific magazine and Glock model.
Will an extension damage my magazine or Glock?
No. Extensions are designed to be removable and do not permanently alter the magazine or gun. Removing an extension leaves the magazine in its original condition. The extension itself is not under spring tension and does not stress the magazine body or the gun's magazine well.
Can I use an extended magazine in a competition or training class?
It depends on the rules of the specific competition or class. Some shooting sports allow extended magazines; others limit capacity or require specific magazine types. Check the rules of your event or class before showing up with extended magazines. Many instructors and ranges will tell you in advance what is and is not allowed.
What happens if I load more rounds than the extension is rated for?
Overloading can cause feeding problems or make it difficult to insert the magazine into the gun. Load only the number of rounds the extension is designed to hold. If you want more capacity, buy a higher-capacity extension or use multiple magazines.
Are there any downsides to using magazine extensions?
The main downside is that extended magazines may not fit all holsters or carry methods without adjustment. They also add a small amount of weight and change the balance of the magazine slightly. Some shooters find the longer magazine less comfortable to grip. Test your setup before relying on it.