Running boards are side steps that bolt to your vehicle's frame, and you can find installers through tire shops, dealerships, independent mechanics, and specialty truck shops in your area.
A running board is a flat or slightly angled step that runs along the side of your vehicle between the wheels. It serves two purposes: it gives you something to grip and step on when climbing into a high vehicle, and it protects the lower body panels from road debris and minor impacts. Most running boards are made from aluminum, stainless steel, or composite materials and bolt directly to the frame or existing mounting points.
Finding someone to install them means knowing where to look and what to expect from the process. Installation typically takes one to three hours depending on the vehicle and the type of running board. The cost of installation labor varies by location and shop, but you should expect to pay for both the parts and the labor separately.
Key Takeaways
- Tire shops, dealerships, and independent mechanics all install running boards, and each has different pricing and turnaround times.
- Running boards bolt to your vehicle's frame or existing mounting points, so installation does not require welding or permanent modifications in most cases.
- You can bring your own running board to an installer or purchase one through them, and the choice affects both cost and warranty coverage.
- Installation typically takes one to three hours, and you should ask about warranty on both the parts and the labor before you commit.
Where to Find Running Board Installers Near You
Start with tire shops in your area. Most full-service tire retailers like Firestone, Goodyear, and Discount Tire offer running board installation as part of their accessory services. Call ahead and ask whether they stock running boards or whether you need to bring your own. Some shops prefer to sell you the part and install it; others will install what you provide. Ask for their labor rate and how long the job typically takes.
Dealerships are a second option, especially if your vehicle is still under warranty or relatively new. The dealership's service department can install running boards using parts that match your vehicle's specifications. Dealership labor rates are usually higher than independent shops, but the work comes with the dealership's warranty. Call the service department directly and ask whether they have running boards in stock for your vehicle model.
Independent mechanics and truck accessory shops often have the most competitive pricing and the fastest turnaround. Search online for "truck accessories near me" or "running board installation [your city]" to find shops that specialize in this work. Read reviews on Google Maps or Yelp, and call at least two shops to compare prices and availability. Many independent shops will let you bring your own running board if you want to shop for price separately.
What to Expect During Installation
Installation begins with the shop lifting your vehicle on a hoist so they can access the underside and the frame mounting points. The installer will locate the correct mounting brackets for your vehicle model—these are usually pre-drilled holes on the frame or existing attachment points. Running boards slide onto these brackets and are secured with bolts, washers, and lock nuts.
The installer will then tighten all fasteners to the manufacturer's torque specification, which prevents the running board from shifting or rattling while you drive. Some running boards require drilling new holes in the frame, which takes longer and may require additional sealing to prevent rust. Ask the shop whether your vehicle requires new holes or whether it uses existing mounting points.
The entire job usually takes between one and three hours. Simpler installations on trucks with existing mounting points take closer to one hour. More complex installations on vehicles that require new holes or additional brackets can take up to three hours. The shop should give you a time estimate when you call, and you can ask whether you can wait or whether you need to drop off the vehicle.
Comparing Pricing and Parts Options
Running board installation costs break into two parts: the cost of the running board itself and the cost of labor. Labor rates vary by region and shop type. Independent shops typically charge between $75 and $150 per hour, while dealerships often charge $100 to $200 per hour. A one-hour installation at an independent shop might cost $75 to $150 in labor alone, while the same job at a dealership could cost $100 to $200.
The running board itself can range from $150 to $600 depending on the material, length, and brand. Aluminum boards are lighter and less expensive. Stainless steel boards cost more but resist rust better. Composite boards fall in the middle and are durable but can crack in extreme cold. You can purchase running boards through the shop, order them online and bring them in, or buy them from a parts retailer and have the shop install them.
If you bring your own running board, confirm with the shop beforehand that they will install it. Some shops charge a small additional fee for installing customer-supplied parts, while others include it in their standard labor rate. Ask whether the shop's warranty covers the installation if you provide the part, or whether the warranty only covers parts they sell.
Warranty and Guarantees on Installation Work
Most shops offer a warranty on their installation labor, typically covering loose fasteners, rattling, or misalignment for 12 months or a set mileage limit. Read the warranty terms before you pay. Some shops may provide their work for the life of your ownership; others limit it to one year. Ask whether the warranty covers only the labor or also covers damage to the running board itself.
The running board manufacturer usually provides a separate warranty on the part itself, covering defects in materials or workmanship. This warranty is separate from the installation warranty and typically lasts one to three years depending on the brand. Keep your receipt and the manufacturer's warranty documentation in case you need to make a claim.
If you purchase the running board through the shop, the shop is usually responsible for both the part and the installation. If you bring your own part, you are responsible for the part's warranty, and the shop is responsible only for the installation work. This is another reason to clarify the warranty situation before you commit.
Preparing Your Vehicle for Installation
Before you take your vehicle to the shop, wash the underside of the vehicle if possible, especially around the frame and mounting points. Dirt and debris can interfere with bolt installation and can trap moisture that causes rust. You do not need to do a deep clean, but removing loose dirt helps the installer work faster.
If you are bringing your own running board, inspect it for damage before you drop it off. Take photos of the condition so you and the shop agree on what damage existed before installation. If the running board arrives damaged from the manufacturer or retailer, the shop should not be held responsible for that damage.
Bring your vehicle's owner manual or have the shop look up the correct mounting specifications for your model. Different model years and trim levels sometimes have different mounting points, and using the wrong specification can result in an unsafe installation. The shop should verify the correct specification before they begin work.
Questions to Ask Before You Book
Call the shop and ask these questions before you commit: Do you have running boards in stock for my vehicle model, or do I need to bring my own? What is your labor rate per hour, and how long does this job typically take? Do you offer a warranty on the installation, and if so, what does it cover? Can I wait while the work is done, or do I need to drop off the vehicle? Do you charge extra for customer-supplied parts?
Also ask whether the shop has experience with your specific vehicle model. Some vehicles have unusual mounting points or require special tools. A shop that regularly installs running boards on your model will finish faster and more accurately than a shop doing it for the first time. Ask for references or reviews from customers with the same vehicle.
Frequently Asked Questions
Can I install running boards myself if I have basic tools?
Yes, if your vehicle has existing mounting points and you are comfortable working under a lifted vehicle. You will need a jack, jack stands, a socket set, and a torque wrench. If your vehicle requires drilling new holes or welding, hire a professional. Improper installation can cause the running board to shift while driving, creating a safety hazard.
Do running boards affect my vehicle's warranty?
Running boards installed by a dealership do not affect your warranty. Running boards installed by an independent shop or by you may affect warranty coverage only if the installation causes damage to the frame or electrical systems. Document the installation with photos and keep receipts in case a warranty dispute arises.
What is the difference between running boards and side steps?
Running boards are typically longer, running the full length of the vehicle's side, and are designed for both function and appearance. Side steps are shorter and more utilitarian. Installation is similar for both, and most shops can install either type. The choice depends on your vehicle's style and your budget.
How long do running boards last before they need replacement?
Aluminum and stainless steel running boards typically last 5 to 10 years depending on climate and road salt exposure. Composite boards may crack in extreme cold and may need replacement sooner. Regular cleaning and inspection for loose bolts extend the life of any running board.
Can I remove running boards later without damaging my vehicle?
Yes. Running boards bolt on and do not require permanent modifications in most cases. When you remove them, you may see small bolt holes in the frame, but these do not affect the vehicle's structural integrity or resale value. Fill the holes with rubber plugs if you want to hide them.