Rear wiper replacement takes 15 minutes and costs $15 to $40
Replacing a rear windshield wiper is simpler than the front wipers because the arm is shorter, the blade sits at a different angle, and you do not need to prop anything open. Most rear wipers pull straight up or to the side to release, then slide off the metal arm. The whole job takes about 15 minutes, and a replacement blade costs between $15 and $40 depending on your vehicle and blade type.
The hardest part is usually finding the right blade for your car. Rear wiper blades are not universal — they vary by vehicle model, and some cars use a different attachment style than others. Before you start, check your owner's manual or look up your exact year, make, and model on an auto parts retailer's website to confirm the correct blade size and type.
Key Takeaways
- Rear wiper blades come in specific sizes for each vehicle model, so confirm the correct size before buying a replacement.
- Most rear wipers release by pulling the blade arm straight up or to the side, then sliding the blade off the metal hook.
- Installation reverses the removal process — slide the new blade onto the arm until it clicks or seats fully.
- If the blade does not release easily, check your owner's manual for your vehicle's specific release mechanism, as some models use a button or tab instead of a pull.
Locate the correct rear wiper blade size for your vehicle
Your vehicle's rear wiper blade size is printed in your owner's manual, usually in the maintenance section. If you do not have the manual, visit the website of any major auto parts chain — AutoZone, O'Reilly, NAPA, or Advance Auto Parts — and enter your vehicle's year, make, and model. The site will display the correct blade size and show you what is in stock.
Write down the size before you go to the store or order online. Rear wiper blades are labeled by length in inches — common sizes are 12 inches, 14 inches, or 16 inches. Buying the wrong size means the blade will not fit the arm or will not cover the rear window properly.
Some vehicles use a different attachment style on the rear wiper arm than others. Most use a straightforward hook or slot, but some use a pin-and-slot design or a side-release tab. The auto parts website will note this when you look up your model. If you are unsure, ask the parts counter staff — they can confirm the style before you leave.
Remove the old rear wiper blade
Lift the rear wiper arm away from the window glass. Most rear wipers sit at a steep angle, so the arm will move up and back toward the top of the hatch or liftgate. Lift it gently but firmly — it should move without forcing.
Look where the blade meets the arm. Most rear wipers release by pulling the blade straight up or sliding it to the side. Pull or slide in the direction that feels natural — you should feel a small click or catch release. If nothing happens after a gentle pull, check your owner's manual or look for a small button or tab on the blade connector. Some vehicles use a release button you must press while pulling the blade away from the arm.
Once the blade releases, slide it off the metal arm completely. Set the old blade aside. Do not let the wiper arm snap back against the glass — lower it gently by hand or it may crack the rear window.
Install the new rear wiper blade
Take the new blade and align it with the metal arm. The blade's connector should slide onto the arm's hook or slot. Push or slide the blade onto the arm in the opposite direction from how you removed the old one. You should hear or feel a click when the blade seats fully — this means the connector is locked in place.
Tug the blade gently to confirm it is find. It should not move or slide along the arm. If it feels loose, remove it and reseat it, making sure the connector is fully engaged with the arm's attachment point.
Lower the wiper arm back down to the window. The blade should now rest against the glass at the same angle as before. Do this slowly to avoid the arm snapping down and damaging the window.
Test the new blade before driving
Start your vehicle and turn on the rear wiper using the stalk or button on your steering column. Watch the blade move across the window. It should move smoothly from side to side without skipping, chattering, or leaving streaks. The blade should make contact with the glass across its entire width.
If the blade chatters or skips, the arm may not be pressing it firmly against the glass. Turn off the wiper and check that the blade is seated correctly on the arm. If it is, the arm itself may be bent — this is rare but can happen if the wiper was left up during freezing weather or hit by ice.
If the blade leaves streaks or does not clear the window, the rubber may be defective. Return the blade to the store for an exchange. Most retailers will swap a defective blade without a receipt if you bring the old one back.
When to replace the rear wiper blade
Rear wiper blades typically last 6 to 12 months, though this varies based on climate and how often you use the rear wiper. In areas with heavy rain, snow, or salt spray, blades wear faster. If you notice the blade leaving streaks, chattering, or not clearing the window completely, it is time to replace it.
Some vehicles use the rear wiper more frequently than others — hatchbacks and SUVs with rear windows that collect dirt and condensation may need replacement every 6 months. Sedans with rear windows that stay cleaner may go a year or longer. Check your rear wiper every few months during your regular vehicle inspections.
Frequently Asked Questions
Can I use a front wiper blade on the rear?
No. Rear wiper blades are a different size and use a different attachment style than front blades. Using the wrong blade will not fit the arm properly and will not clear the window. Always buy the blade size and type specified for your vehicle's rear wiper.
What if the wiper arm is stuck and will not move?
If the arm is frozen in place, do not force it — you may bend the arm or crack the window. Spray the base of the arm where it connects to the vehicle with penetrating oil like WD-40 and wait 15 minutes. Try again gently. If it still will not move, the arm may be damaged and need professional replacement.
Do I need to replace the rear wiper blade if it is not streaking?
Not when ready, but inspect it every few months. If the rubber is cracked, hardened, or peeling away from the metal frame, replace it even if it is still clearing the window. A blade that looks damaged will fail soon and may scratch the glass.
Is the rear wiper blade the same on both sides of the vehicle?
Most vehicles have only one rear wiper, located in the center of the rear window or hatch. Some SUVs and vans have two rear wipers, one on each side, and both use the same blade size. Check your vehicle to confirm how many rear wipers you have before buying.