The release handle is inside the car, below the steering wheel
To open the bonnet of a Mini Cooper, pull the bonnet release lever located on the left side of the dashboard, underneath the steering wheel. You'll find it as a small handle or lever — on most models it's black plastic with a car bonnet symbol printed on it. Pull it toward you with moderate force; you should hear a click as the bonnet latch disengages.
After pulling the interior lever, the bonnet will pop up slightly but won't fully open. Walk to the front of the car and locate the secondary safety catch — a small metal or plastic tab in the center of the bonnet opening, just above the grille. Push or lift this catch to the side, and the bonnet will swing open freely.
On some Mini models, particularly older ones, the secondary catch may be a lever you need to push down rather than to the side. If you're unsure which direction yours moves, explore gentle pressure in both directions until you feel it release. The bonnet should then open without resistance.
Key Takeaways
- The bonnet release lever is located below the steering wheel on the left side of the dashboard and requires a firm pull toward you.
- After pulling the interior release, you must manually push or lift the secondary safety catch at the front of the bonnet to fully open it.
- The secondary catch is typically found in the center of the bonnet opening, just above the grille area.
- Different Mini model years may have slightly different catch designs, so check your owner's manual if the standard method doesn't work.
Locating the interior release on different Mini models
The position of the bonnet release lever varies slightly depending on your Mini's year and model. On most modern Minis (2014 onwards), the lever is mounted on the left side of the dashboard, below the steering wheel, and is clearly marked with a bonnet symbol. On older Mini Coopers (2002–2013), the lever may be positioned slightly differently — sometimes mounted on the left side of the steering column itself rather than the dashboard panel.
If you cannot find the lever in the expected location, check your owner's manual for your specific model year. Some Mini variants, particularly the Countryman and Clubman, may have the release in a slightly different spot. The manual will show you the exact location with a diagram.
What to do if the bonnet won't open after pulling the lever
If you've pulled the interior release lever but the bonnet still won't budge, the secondary safety catch may be stuck or you may not have fully disengaged the interior latch. Pull the interior lever again, this time with more force — you should hear a distinct click. Then return to the front and check that you're pushing the secondary catch in the correct direction for your model.
If the bonnet still won't open, the release cable may be broken or the catch mechanism may be jammed with dirt or corrosion. Do not force the bonnet open, as this can damage the hinges or latch. Instead, consult a Mini dealer or mechanic who can safely inspect the release mechanism and repair it if needed.
Closing the bonnet safely
To close the bonnet, lower it gently until it's about 12 inches above the body of the car, then release it. The bonnet should fall the rest of the way and latch automatically. Do not slam it down or let it drop from a height, as this can damage the hinges or the latch mechanism.
If the bonnet doesn't latch when you release it from that height, lift it again and check that nothing is blocking the latch area — leaves, dirt, or a loose hose can prevent a proper seal. Clean the area if needed, then try closing it again with a gentle push.
Common reasons the bonnet release gets stuck
The bonnet release lever can become stiff or unresponsive if the cable inside the dashboard has corroded or come loose. This is more common in older Minis or cars that have been exposed to salt air or moisture. If the lever feels stuck or requires excessive force to pull, do not force it repeatedly — you may snap the cable.
Dirt and debris can also accumulate around the secondary safety catch at the front of the car, making it harder to push or lift. If the catch feels gritty or stuck, spray a small amount of penetrating oil (such as WD-40) around the catch mechanism, wait a few minutes, and try again. Wipe away any excess oil with a clean cloth.
Bonnet release on Mini electric models
Mini electric models (Mini SE and newer electric variants) use the same bonnet release system as petrol and diesel Minis — an interior lever below the steering wheel and a secondary manual catch at the front. The electric powertrain does not change how the bonnet opens or closes. Follow the same steps as you would for any other Mini Cooper.
If your Mini SE or electric model has a motorized bonnet (some newer luxury variants do), your owner's manual will specify this. Motorized bonnets open with a button rather than a lever, but the secondary catch still requires manual release at the front of the car.
Frequently Asked Questions
Do I need to turn off the engine before opening the bonnet?
Yes, always turn off the engine and allow it to cool for a few minutes before opening the bonnet. The engine and radiator become very hot during operation, and touching them can cause burns. If you need to check something urgently, wait at least five minutes after turning off the engine.
What if the secondary catch is broken?
If the secondary catch is cracked, bent, or missing, the bonnet will not stay open safely. Do not prop it open with a stick or other object — this is unsafe and can damage the bonnet. Contact a Mini dealer or mechanic to have the catch replaced before attempting to access the engine bay again.
Is the bonnet release the same on all Mini Cooper models?
The basic system is the same across most Mini Coopers, but the exact location of the interior lever and the design of the secondary catch can vary by year and model. Always check your owner's manual for your specific car to confirm the correct procedure.
Can I open the bonnet from outside the car?
No, the bonnet cannot be opened from outside without first pulling the interior release lever. This is a safety feature. You must be inside the car to access the release mechanism.