The hood release is inside the car, below the steering wheel

To open the hood on a Subaru Outback, pull the hood release lever located on the left side of the dashboard, underneath the steering wheel. You'll find a small black handle with a hood symbol on it. Pull it toward you with moderate force — it should click and the hood will pop open slightly. Then walk to the front of the car, slide your fingers under the hood where it has popped up, and lift it all the way open.

The hood will stay open on its own once fully raised. You don't need to prop it or hold it. If the hood feels stuck or won't pop after you pull the lever, stop and check that you're pulling the correct handle. Forcing a stuck hood can bend the latch or damage the release cable.

Key Takeaways

  • The hood release lever is always on the left side of the dashboard below the steering wheel, marked with a hood symbol.
  • Pull the lever toward you until you hear a click, then walk to the front and lift the hood the rest of the way by hand.
  • The hood will stay open without a prop rod or support — Subaru Outbacks do not use a separate prop rod.
  • If the hood won't pop or feels stuck, do not force it; check that you have the right lever and consider having a mechanic inspect the latch.

Where to find the hood release lever

Sit in the driver's seat and look to the left of the steering column, below the dashboard. The hood release is a small black handle, usually about 3 inches long, with a raised hood symbol printed or embossed on it. It's positioned lower than most other dashboard controls — roughly at knee height when you're seated normally. On some model years it may be slightly recessed into the dashboard, so run your fingers along the area if you don't see it when ready.

The lever should be straightforward to identify once you know what to look for. It's the only handle in that location, and the hood symbol makes it unmistakable. If you're unsure, your owner's manual will show the exact location with a diagram specific to your model year.

How to pull the lever correctly

Grip the handle and pull it toward you with steady, even pressure. You should feel resistance at first, then a distinct click as the latch releases. The click is important — it means the hood latch has actually opened. If you pull and feel nothing, you may be pulling the wrong handle or the cable may be broken.

Don't yank or jerk the lever. A smooth, firm pull is all that's needed. Once you hear the click, the hood will be unlatched but will only pop open an inch or two. You then need to walk to the front of the car and push the hood up the rest of the way by hand.

Lifting the hood from the front

After pulling the release lever, go to the front of the car and look for the gap where the hood has popped slightly open. Slide your fingers under the hood on either side of the center, or grasp the underside of the hood where it meets the fender. Lift smoothly upward until the hood reaches its full open position.

The hood will lock in the fully open position and stay there. You do not need to prop it open with a rod or stick — Subaru Outbacks have a self-supporting hood mechanism. If the hood feels heavy or difficult to lift, or if it won't stay open, the support struts may be worn and should be inspected by a mechanic.

What to do if the hood won't open

If you pull the release lever and nothing happens, first check that you're pulling the correct handle. The hood release is always on the left side below the steering wheel. If you've confirmed you have the right lever, try pulling it again with slightly more force — sometimes the cable needs a firm, steady pull to release.

If the hood still won't pop, the release cable may be broken or the latch may be stuck. Do not force the hood open by prying or hitting it, as this can damage the latch mechanism and make the repair more expensive. Instead, have a mechanic inspect the hood latch and release cable. They can determine whether the cable has snapped, the latch is jammed, or the lever itself is broken.

Closing the hood safely

To close the hood, lower it from the fully open position until it's about 12 inches above the closed position, then let it drop the last bit on its own. The hood should latch automatically with a solid click. Do not slam the hood down hard — the weight of the hood itself is enough to engage the latch.

After closing, push down on the center of the hood with the palm of your hand to confirm it's latched. If it pops back up, the latch didn't catch. Lower it again and let it drop more gently. Once latched, the hood should be flush with the fenders and won't move if you push on it.

Frequently Asked Questions

Do I need to turn off the engine before opening the hood?

Yes, always turn off the engine and let it cool for a few minutes before opening the hood. This prevents burns from hot engine parts and reduces the risk of injury from moving engine components. If you need to check something while the engine is running, turn it off first.

What if the hood release lever is broken?

If the lever itself breaks or won't move, you may be able to access the hood latch from underneath the car or through the grille to release it manually. However, this requires getting under the vehicle and knowing where the latch cable connects. A mechanic can do this quickly and then replace the broken lever.

Is there a backup way to open the hood if the cable snaps?

Some Subaru Outbacks have a manual release accessible from the engine bay side, but this only works if you can already get the hood open slightly. If the cable is completely broken and the hood won't budge, a mechanic will need to remove the latch or access it from underneath to open the hood.

Why does my hood feel heavy when I lift it?

The hood should feel moderately heavy but not difficult to lift. If it feels very heavy or drops quickly when you release it, the support struts are likely worn out. These struts help hold the hood open and prevent it from slamming shut. A mechanic can replace them, usually as a pair.