Find and pull the hood release lever inside your car
The hood release is a lever or handle mounted on the floor or dashboard inside your vehicle, almost always on the driver's side. Look under the steering wheel on the left side of the dashboard, or check the area to the left of the steering column near your knee. On some cars, especially newer models, it may be a button instead of a lever.
Pull the lever or press the button firmly toward you. You should hear a click or feel resistance give way. This releases the hood latch from inside the car. The hood will pop up slightly but will not open all the way — this is normal and intentional.
Key Takeaways
- The hood release lever is located inside your car on the driver's side, either under the dashboard or near the steering column.
- Pull the interior lever first, then go to the front of the car and lift the secondary latch under the hood edge to fully open it.
- The hood will pop up partway after you pull the interior release, but you must manually lift it the rest of the way.
- If the hood is stuck, do not force it — check that you pulled the interior release completely and look for any visible obstructions.
Walk to the front of the car and locate the secondary latch
After pulling the interior release, go to the front of your car where the hood meets the grille. The hood will be slightly ajar. Feel along the center of the hood's underside, just above where it meets the grille. You will find a small metal latch or lever — this is the secondary safety latch.
This second latch exists on nearly all cars and prevents the hood from flying open while you are driving. It is a safety feature, not a sign that something is wrong. You must release it by hand before the hood will open fully.
Lift the secondary latch and raise the hood
Push or lift the secondary latch upward or to the side, depending on your car's design. The exact motion varies — some latches flip up, others slide sideways. Once you feel it release, the hood is free to open.
Grasp the hood on both sides and lift it upward. It should rise smoothly. Most hoods have a prop rod or hydraulic struts that will hold it open once it reaches full height. If your car has a prop rod (a metal stick), you will need to locate its notch and position it in the slot on the underside of the hood to keep it propped open while you work.
find the hood so it stays open
If your hood has a prop rod, insert the end into the bracket or slot on the underside of the hood. The rod should be snug but not forced. If your car has hydraulic struts instead, the hood will stay open on its own — you do not need to do anything.
Never work under a hood that is not properly secured. A hood that falls can cause serious injury. If the prop rod is missing or the struts are weak, do not open the hood until you have a replacement or repair.
Close the hood when you are finished
Remove the prop rod if your car has one and set it aside safely. Lower the hood gently until it is about 12 inches above the frame, then let it drop the rest of the way. It should latch automatically. Do not slam the hood down — let gravity do the work.
If the hood does not latch, raise it again and check that nothing is blocking the latch mechanism. Close it again gently. If it still will not latch, something may be bent or misaligned — do not force it.
Troubleshooting if the hood will not open
If you pulled the interior release and the hood did not pop up at all, the cable may be broken or disconnected. Try pulling the lever again with more force, or have someone else pull it while you watch the latch mechanism under the hood to see if it moves.
If the hood is stuck because of rust or corrosion around the latch, spray penetrating oil around the edges where the hood meets the frame and wait 10 to 15 minutes before trying again. Do not pry or force the hood open, as you can bend the frame or damage the hinges.
Frequently Asked Questions
What if I cannot find the hood release inside my car?
Check your owner's manual — the location varies by make and model. On some older cars, the release is a cable you pull rather than a lever. On some newer cars, it is a button on the dashboard or a touch-sensitive panel. Your manual will show you exactly where it is and how to use it.
Can I open the hood while the engine is running?
Yes, you can open the hood while the engine is running, but it is safer to turn the engine off first. If you need to check something while the engine is warm, make sure the engine has cooled for at least a few minutes before touching any metal parts under the hood.
Why does my hood have two latches?
The interior release and secondary latch work together as a safety system. The interior release prevents the hood from opening accidentally while you drive, and the secondary latch prevents it from flying open if the interior release fails. Both must be released for the hood to open fully.
What should I do if the prop rod falls out while the hood is open?
Close the hood when ready and carefully. Do not work under an unsupported hood. Locate the prop rod, check that it is not bent, and try again. If the rod is missing or damaged, do not open the hood until you have a replacement.