The basic steps to open your Mini's bonnet

To open the bonnet on a Mini, pull the interior release lever located on the left side of the dashboard (or lower left on the steering column, depending on your model year), then walk to the front of the car and lift the bonnet lid. On newer Minis, you may need to push a secondary catch under the bonnet's front edge before it will fully open. The exact location of the interior lever and the force needed to open the bonnet vary slightly between model years, so check your owner's manual for the precise position in your car.

The bonnet should open smoothly once both catches are released. If it sticks or feels jammed, do not force it — stop and consult your manual or a technician, as forcing a stuck bonnet can damage the hinges or the release mechanism itself.

Key Takeaways

  • The interior release lever is usually on the left side of the dashboard or lower left near the steering column, though the exact spot depends on your Mini's year and model.
  • After pulling the interior lever, you must walk to the front and lift the bonnet lid, and on some models push a secondary catch underneath before it opens fully.
  • Your owner's manual shows the exact location of the release lever for your specific Mini, which is the fastest way to find it if you are unsure.
  • If the bonnet feels stuck or jammed, stop pulling and check your manual or contact a technician rather than forcing it open.

Where the interior release lever is located

On most Minis built before 2015, the bonnet release lever is mounted on the left side of the dashboard, below the steering wheel. You pull it toward you with moderate force — it should click and release the bonnet catch. On newer Minis (2015 and later), the lever may be positioned lower, closer to the floor on the left side of the steering column, or integrated into a button or switch on the dashboard itself.

If you cannot find the lever by looking at the left side of your dashboard, open your owner's manual and search for "bonnet release" or "hood release." The manual will show a diagram with the exact location for your model year. This is faster and more reliable than guessing, especially on your first attempt.

The secondary catch under the bonnet

Once you pull the interior lever and hear a click, the bonnet will be partially unlatched. Walk to the front of the car and look for a small metal or plastic catch or latch under the front edge of the bonnet, usually in the center. On many Minis, you need to push this catch to the side or upward before the bonnet will open fully.

This secondary catch is a safety feature that prevents the bonnet from flying open while you are driving. It requires a deliberate second action, so the bonnet will not open by accident. Once you push the catch, the bonnet should lift freely. If it does not, check that you have fully released the interior lever and that the secondary catch is fully disengaged.

What to do if the bonnet is stuck

If the bonnet does not open after you pull the interior lever and push the secondary catch, stop and do not force it. Forcing a stuck bonnet can bend the hinges, crack the bonnet itself, or break the release cable inside the car. Instead, try pulling the interior lever again with a firm, steady pull — sometimes the cable needs a second attempt to fully engage.

If the bonnet still does not budge, the release cable may be broken or the catch may be corroded or jammed. Contact a Mini dealer or a general mechanic who can inspect the mechanism without causing damage. Trying to pry the bonnet open with tools will almost certainly cause more damage than the original problem.

Bonnet release differences between Mini model years

Older Minis (pre-2007) have a simpler mechanical release system with the lever clearly visible on the left side of the dashboard. Mid-range models (2007–2014) have the same basic setup but may have slightly different lever positions. Newer Minis (2015 and later) sometimes use electronic or button-based releases, and the secondary catch mechanism may feel different or be positioned differently under the bonnet.

Because the exact mechanism varies, your owner's manual is the most reliable source for your specific car. If you have lost your manual, you can read a PDF version from the Mini website or from third-party manual repositories by entering your car's year, model, and engine size. Spending two minutes reading the correct instructions will save you time and frustration.

Frequently Asked Questions

Where is the bonnet release lever on a 2020 Mini Cooper?

On 2020 Minis, the bonnet release is typically a button or lever on the lower left side of the dashboard, near the steering column. Check your owner's manual for the exact location, as it may vary slightly between the Cooper, Countryman, and other Mini models sold that year.

Do I need to turn off the engine before opening the bonnet?

Yes, always turn off the engine and let it cool for a few minutes before opening the bonnet, especially if you plan to work on the engine or check fluid levels. A hot engine can cause burns, and some components may still be moving or under pressure when the engine is running.

What should I do if the secondary catch is broken?

If the secondary catch is cracked, bent, or missing, the bonnet may not stay open safely or may close unexpectedly while you are working. Do not drive the car until the catch is repaired. Contact a Mini dealer or mechanic to have it replaced, as this is a safety feature.

Can I open the bonnet from the outside without using the interior lever?

No, the interior lever is the only way to release the bonnet on a Mini. There is no external release button or keyhole. If the interior lever is broken, you will need a mechanic to access the bonnet by removing the interior trim or repairing the release cable.