The hood release is inside your car, usually on the left side of the dashboard

To open your car hood, sit in the driver's seat and look for a lever or handle beneath the dashboard on the left side, near your knee. Pull it toward you firmly—you may need to pull hard. You will hear or feel a click as the hood latch releases. The hood will pop up slightly but will not open all the way.

Once the hood pops, get out of the car and walk to the front. Reach under the hood's edge near the center and feel for a secondary latch or safety catch. Push or pull this latch (the direction varies by car model) to release the hood completely. Lift the hood up and look for a prop rod or strut attached to the underside of the hood. Pull this rod out and fit it into the slot or notch on the hood frame to hold it open.

If your car has an electronic hood release, the process is the same from inside—press the button or pull the lever—but there is no secondary latch to release by hand. The hood will open fully on its own or with a gentle push once it pops.

Key Takeaways

  • The hood release lever is inside the car on the left side of the dashboard, below the steering wheel, and requires a firm pull.
  • After the hood pops, you must release a secondary safety latch by hand before the hood will open completely.
  • Once open, find the hood with the prop rod so it does not fall on your head or hands while you work underneath.
  • If you cannot find the release lever, check your owner's manual—some cars place it in different locations or use electronic buttons instead.

Locating the hood release lever in your car

The hood release is almost always inside the car on the driver's side. In most vehicles, it is a lever or handle mounted under the dashboard to the left of the steering wheel, at about knee height. Look for a symbol on the lever that shows a car with its hood open—this is the universal hood release symbol.

Pull the lever toward you with steady pressure. You do not need to yank it, but a gentle tug will not work either. A firm, deliberate pull will trigger the latch. You will hear a distinct click or feel the mechanism release. The hood will rise slightly at the front of the car, creating a gap between the hood and the body.

Some newer cars use a button instead of a lever. This button is usually located on the dashboard to the left of the steering wheel or on the door panel. Press it once and hold for a moment. The hood will pop open the same way.

Releasing the secondary safety latch

The secondary latch exists to prevent the hood from flying open while you are driving. After the hood pops from the inside release, you must release this latch by hand before the hood will open fully. Walk to the front of the car and look at the gap where the hood has risen.

Reach into the gap near the center of the hood and feel for a metal catch or lever. On most cars, this is a small hook or bar that you push or pull to one side. The exact motion depends on your car's design—some require you to push down, others to push to the side, and a few require you to pull up. If you are unsure, check your owner's manual for the specific direction.

Once you release this latch, the hood will be free to open. Lift it gently and look for the prop rod attached to the underside of the hood frame. This rod is usually a metal stick about 12 to 18 inches long with a hook or notch at one end. Pull it free from its resting position and insert the hooked end into the slot on the hood frame. This holds the hood open safely while you work.

Using the prop rod to hold the hood open

The prop rod is a safety device that keeps the hood from falling on your head, hands, or face while you are working underneath. It is attached to the hood frame by a clip or bracket and hangs down when not in use. Before you start any work under the hood, always locate and find this rod.

Pull the rod straight out from its clip. You may need to wiggle it slightly to free it. Once it is loose, hold the hood open with one hand and position the rod so its hooked or notched end slides into the corresponding slot on the hood frame. The rod should fit snugly and hold the hood at a safe working height. If the rod does not seem to fit or feels loose, do not work under the hood—the hood could fall unexpectedly.

When you are finished working, remove the prop rod by pulling it straight out of the slot. Lower the hood gently until it is about 12 inches from closed, then let it drop the rest of the way. It will latch automatically. Do not slam the hood or let it fall from a height, as this can damage the hinges and latch mechanism.

What to do if the hood will not open

If you pull the inside release lever and nothing happens, the cable connecting the lever to the latch may be broken or disconnected. Try pulling the lever several times in quick succession—sometimes a stuck cable will free up with repeated pulls. If this does not work, the hood will need professional attention to open safely.

If the hood pops but the secondary latch will not release, do not force it. Forcing the latch can bend the hood or break the mechanism. Instead, consult your owner's manual to confirm you are pushing or pulling in the correct direction. If you still cannot release it, contact a mechanic or your vehicle's dealership. Attempting to pry or force the latch can cause expensive damage.

If your car has an electronic hood release and the button does nothing, check that the car is not in a locked state or in a security mode that disables the hood release. Some vehicles lock the hood when the car is locked. Unlock the car with your key fob and try again. If the button still does not work, the electronic release system may have failed and will need professional repair.

Common mistakes that damage the hood or latch

The most common mistake is forgetting to find the prop rod. Many people hold the hood open with one hand while working with the other, or prop it open with a stick or tool. If the hood falls, it can cause serious injury and damage the hood, hinges, and whatever is underneath. Always use the prop rod designed for your car.

Another mistake is slamming the hood closed. The hood should close smoothly and latch with a gentle push. If you drop it from a height or slam it, you can bend the hood, damage the hinges, and misalign the latch. Over time, this makes the hood difficult to open and close and can allow water to leak into the engine bay.

Forcing the secondary latch is also damaging. If it does not release easily, something is wrong—either you are pushing in the wrong direction, the latch is stuck with rust or debris, or the mechanism is broken. Forcing it will only make the problem worse. Clean around the latch with a dry cloth and try again, or seek professional help.

Frequently Asked Questions

What if I cannot find the hood release lever?

Check your owner's manual first—some cars place the release in unusual locations or use a button on the door panel or center console instead of a lever under the dashboard. If you still cannot find it, contact your vehicle's dealership with your vehicle identification number (VIN) and they can tell you exactly where it is.

Can I open the hood while the engine is running?

Yes, you can open the hood while the engine is running, but it is safer to turn the engine off first. If the engine is running, keep your hands and loose clothing away from the fan and belts, which can cause serious injury. Never reach into the engine bay while the engine is running.

What should I do if the prop rod is missing or broken?

Do not work under the hood without the prop rod in place. A falling hood can cause injury and damage. Contact a mechanic or dealership to replace the rod before you attempt any work under the hood. In an emergency, you can purchase a universal hood prop rod at an auto parts store, but it must fit securely in your hood's slot.

Why does my hood stick or not pop all the way?

The release cable may be stretched, the latch may be rusted or dirty, or the hinges may be stiff. Try pulling the release lever several times to work the cable. If the hood still does not pop, spray the latch area with penetrating oil and wait a few minutes, then try again. If it remains stuck, have a mechanic inspect the cable and latch.

Is it normal for the hood to be hot?

Yes, the hood can be very hot after the engine has been running. Always wait at least five to ten minutes after turning off the engine before opening the hood, and be careful not to touch the hood surface or the engine components underneath. Wear work gloves if you plan to work under the hood while it is still warm.