What a ProCharger installation involves and what you need to know first
Installing a ProCharger supercharger on a Dodge Challenger R/T is a significant engine modification that requires mechanical skill, specialized tools, and several days of work. A ProCharger is a belt-driven air compressor that forces more air into your engine, increasing horsepower and torque. The job involves removing your intake manifold, serpentine belt system, and front accessories, then mounting the supercharger unit and routing new belts and hoses.
This is not a bolt-on weekend project. Most installations take 15 to 25 hours of labor, and mistakes during installation can damage your engine or void your warranty. If you do not have experience with engine work, you should have a may have access to mechanic or performance shop handle this. If you are doing it yourself, you will need a service manual specific to your Challenger's model year and engine size, the ProCharger kit designed for your vehicle, and access to a lift or jack with proper safety stands.
Before you start, verify that your Challenger R/T's engine is in good condition. A supercharger adds stress to internal components. If your engine has high mileage, weak fuel injectors, or a failing fuel pump, the supercharger will expose those problems quickly.
Key Takeaways
- ProCharger installation requires removing your intake manifold, serpentine belt system, and front engine accessories, then mounting the supercharger unit and routing new belts and hoses.
- The job typically takes 15 to 25 hours and demands a lift, proper tools, a service manual for your specific model year, and mechanical experience.
- You must upgrade your fuel system and tune your engine after installation, or the supercharger will run lean and damage your engine.
- Professional installation at a performance shop usually costs between $2,000 and $4,000 in labor, plus the cost of the kit and supporting modifications.
- A ProCharger will void your factory warranty and may affect your insurance rates or vehicle registration depending on your state.
Gather the right kit and verify it fits your model year
ProCharger makes different kits for different Challenger R/T model years and engine displacements. The 5.7L V8 Hemi engine in most R/T models has multiple kit options depending on whether your car is a 2008–2014 first-generation, 2015–2023 second-generation, or 2024+ third-generation Challenger. Ordering the wrong kit will not fit, and you cannot adapt one kit to another generation.
When you order, you will receive the supercharger head unit, a serpentine belt, a belt tensioner, intake manifold gaskets, hoses, clamps, and a mounting bracket. Some kits include fuel injectors; others do not. Check the kit contents against your engine's current fuel injector size. If your injectors are stock, you will almost certainly need larger ones to support the extra air the supercharger delivers.
The kit does not include engine tuning software or a custom tune. You will need to purchase a separate tune from a performance tuner who has experience with ProCharger Challengers. This tune adjusts fuel delivery, ignition timing, and boost pressure to match your supercharger setup and prevent engine damage.
Remove the intake manifold and front engine accessories
Start by disconnecting the negative battery terminal and allowing the engine to cool completely. Drain the coolant from your radiator into a clean container so you can reuse it. Remove the upper intake manifold cover and any hoses or brackets attached to it.
Unbolt the serpentine belt tensioner and remove the belt. Take a photo or draw a diagram of the belt routing before you remove it so you know how to route the new one. Remove the alternator, power steering pump, and air conditioning compressor by unbolting them from their mounts. You do not need to disconnect their hoses; you can hang them out of the way with wire or rope.
Remove the intake manifold bolts in a crisscross pattern, starting from the outside and working toward the center. Lift the manifold away carefully and set it on a clean surface. Scrape off the old gasket material from the cylinder heads using a plastic scraper or gasket removal tool. Do not use a metal scraper, as you can gouge the aluminum surface. Clean the gasket surfaces with a lint-free cloth and gasket cleaner.
Install the ProCharger mounting bracket and supercharger unit
Install the new intake manifold gaskets on the cylinder heads. Position the ProCharger mounting bracket according to the kit instructions and bolt it to the engine block. The bracket location varies by model year, so follow your specific kit's diagram exactly.
Bolt the supercharger head unit to the mounting bracket. Tighten all bolts in a star pattern to may support even pressure. Do not over-tighten; follow the torque specifications in your kit instructions. Install the new serpentine belt tensioner and route the supercharger drive belt according to the belt routing diagram that came with your kit. The belt should have even tension with no twisting or misalignment.
Reinstall the alternator, power steering pump, and air conditioning compressor in their original positions. Reconnect all hoses and brackets. Refill the coolant reservoir with the coolant you drained earlier. Reconnect the negative battery terminal.
Upgrade your fuel system before you start the engine
Before you fire up the engine, you must upgrade your fuel injectors and fuel pump if they are stock. A supercharger increases air intake by 40 to 60 percent, and your factory fuel system cannot deliver enough fuel to match that air. If you run the engine without upgrading fuel delivery, it will run lean, cause detonation, and destroy your pistons and valves.
Stock Challenger R/T fuel injectors are typically 24 pounds per hour. For a ProCharger setup, you will need injectors in the 30 to 42 pound-per-hour range, depending on your boost level and desired horsepower. Your fuel pump must also be capable of supporting the higher flow rate. Many performance shops recommend upgrading to a Walbro or similar high-flow fuel pump if you are pushing more than 500 horsepower.
Install the new injectors by removing the fuel rail, unclipping the old injectors, and pressing the new ones into place. Use new O-rings on each injector. Reinstall the fuel rail and reconnect the fuel injector connectors. If you are upgrading the fuel pump, you will need to drop the fuel tank, remove the old pump assembly, and install the new one. This is a separate multi-hour job.
Tune your engine and test for leaks
After all mechanical work is complete, you must have your engine tuned by a professional who specializes in ProCharger Challengers. The tuner will connect a laptop to your engine's computer and upload a custom tune that adjusts fuel delivery, ignition timing, and boost pressure. This tune is not optional; it is essential to prevent engine damage.
Start the engine and check for coolant leaks, oil leaks, and fuel leaks around all new connections. Listen for any unusual noises from the supercharger or belt. Let the engine idle for five minutes and check that all gauges read normal. If you see any leaks, shut the engine off when ready and find the source before driving.
Take the car to a dyno for a baseline run. A dyno measures actual horsepower and torque output and confirms that your tune is working correctly. Most ProCharger R/T installations produce between 500 and 650 horsepower, depending on boost level and tune aggressiveness. Your tuner will use the dyno results to refine the tune if needed.
Understand the costs and warranty implications
The ProCharger kit itself typically costs between $3,500 and $5,000, depending on the model year and whether it includes fuel injectors. Upgraded fuel injectors add $400 to $800. A fuel pump upgrade adds another $600 to $1,200. Professional tuning costs $400 to $800. If you pay a shop to do the entire installation, labor typically runs $2,000 to $4,000.
A ProCharger installation will void your factory Dodge warranty on the engine and any related systems. Your insurance company may increase your premium because the car now has significantly more power. Some states require you to re-register your vehicle after major modifications, though this varies by location. Check with your state's Department of Motor Vehicles before you start.
After installation, your maintenance costs will increase slightly. You will need synthetic oil changes more frequently because the engine is working harder. Your serpentine belt will wear faster and may need replacement every 30,000 to 50,000 miles instead of the factory interval. Budget for these ongoing costs when you decide whether to install a supercharger.
Frequently Asked Questions
Can I install a ProCharger myself if I have basic mechanical experience?
Basic experience is not enough. You need experience removing and reinstalling intake manifolds, routing serpentine belts, and understanding engine tuning. If you have never done major engine work, hire a professional. A mistake during installation can cost thousands in engine damage.
What happens if I run the supercharger without upgrading my fuel system?
Your engine will run lean, meaning there is not enough fuel for the extra air the supercharger delivers. This causes detonation, which damages pistons, valves, and cylinder walls. Engine failure can happen within minutes of driving. Fuel system upgrades are not optional.
Will my Challenger R/T pass emissions testing with a ProCharger?
This depends on your state and whether your tune is emissions-compliant. Some states allow modified vehicles to pass if they meet emissions standards at the tailpipe. Others prohibit any engine modification. Contact your state's emissions testing program before installation to understand the rules in your area.
How much horsepower will I gain from a ProCharger?
Most ProCharger R/T installations add 100 to 150 horsepower over stock, bringing the total to 500 to 650 horsepower depending on boost level and tune. The exact gain depends on your engine's condition, fuel system upgrades, and how aggressive your tune is.
Do I need to replace my transmission after installing a ProCharger?
The stock transmission in most Challenger R/Ts can handle ProCharger power if your tune is conservative and you do not abuse the car. However, if you plan to drag race or drive aggressively, consider upgrading to a stronger transmission. Consult your tuner about whether your transmission needs reinforcement for your specific setup.