The quickest way to find your bolt pattern
Your rim's bolt pattern is the number and spacing of the holes that attach your wheel to the hub. You can find it three ways: check your vehicle's manual or door jamb placard, measure it yourself with a ruler, or call a tire shop with your vehicle's year, make, and model.
The manual is fastest if you have it. The door jamb placard — usually on the driver's side door frame — often lists wheel specifications. If neither is available, a tire shop can tell you in under a minute without charging you. Measuring yourself takes about five minutes and requires only a ruler or caliper.
You need this number before buying replacement rims, because a bolt pattern mismatch means the wheel will not bolt on safely. It is also the first thing a tire shop will ask you when you call about used wheels.
Key Takeaways
- Bolt pattern is written as two numbers: the count of holes and the diameter in millimeters, like 5x114.3, meaning five holes spaced 114.3 mm apart.
- Your vehicle's manual, door jamb placard, or existing rim will show the bolt pattern without any measuring or guessing.
- If you measure yourself, you count the holes, then measure from the center of one hole to the center of another across the circle — not to an adjacent hole.
- A tire shop can confirm your bolt pattern by phone using only your vehicle's year, make, and model, and this information is free.
Reading the bolt pattern on your current rim
Look at the back of your current rim — the side facing the brake rotor. You will see a series of numbers and letters stamped or cast into the metal. The bolt pattern appears as two numbers separated by an "x", like 5x120 or 4x108.
The first number is the hole count. The second is the diameter in millimeters. So 5x120 means five holes spaced 120 mm apart. This is the exact specification you need when shopping for replacements.
If the stamping is worn or hard to read, take a photo from different angles in bright light. A tire shop can often read it from a clear photo if you cannot make it out in person.
Checking your vehicle's manual and door placard
Open your owner's manual and search the index for "wheel specifications" or "tire and wheel information." This section lists the bolt pattern for every wheel size your vehicle came with from the factory. Write down the number exactly as it appears.
If you do not have the manual, check the driver's side door jamb — the vertical surface you see when you open the door. A white or yellow label is usually glued there with tire pressure, load capacity, and sometimes wheel specifications. Not all vehicles include bolt pattern on this placard, but many do.
You can also read your manual free from the manufacturer's website using your vehicle's year, make, and model. Most manufacturers keep archives going back 20 years or more.
Measuring bolt pattern yourself
If you cannot find the information in writing, you can measure it in about five minutes with a ruler or digital caliper. Jack up the vehicle safely on a level surface, or measure while the wheel is off the ground if you are already replacing a tire.
Count the holes around the rim. This is your first number. Then measure from the center of one hole to the center of the hole directly across from it — not to the next hole over. For a five-hole pattern, measure from hole 1 to hole 3. For a four-hole pattern, measure from hole 1 to hole 3 (skipping hole 2). For a six-hole pattern, measure from hole 1 to hole 4.
The distance in millimeters is your second number. So if you count five holes and measure 114.3 mm across, your bolt pattern is 5x114.3. Write this down exactly — rounding to the nearest 5 mm is close enough for shopping, but the exact number matters when you order.
Why bolt pattern matters when buying rims
A rim with the wrong bolt pattern will not bolt on, or will bolt on crooked and damage the hub. Even if it seems to fit partway, forcing it can crack the rim, warp the hub, or cause the wheel to fall off while driving. There is no safe workaround — the bolt pattern must match exactly.
Some vehicles share bolt patterns across different model years or even different brands. A Honda Civic and an Acura TSX, for example, both use 5x114.3. But a Toyota Camry uses 5x114.3 as well, while a Corolla uses 5x100. The difference of 14.3 mm is enough to prevent the wheel from seating properly.
When you shop for used rims online or at a salvage yard, always confirm the bolt pattern before buying. Sellers sometimes list it incorrectly, and a mismatched wheel is not returnable once you have driven on it.
Common bolt patterns by vehicle type
Compact cars and sedans often use 4x100, 5x100, or 5x114.3. Trucks and SUVs tend toward 5x120, 5x135, or 6x139.7. Luxury vehicles may use 5x120 or 5x130. These are trends, not rules — the only way to know your vehicle's pattern is to check your manual or measure.
If you are shopping for a vehicle and want to know its bolt pattern before you buy, ask the dealer or seller for the wheel specifications from the manual. This takes them 30 seconds and tells you whether aftermarket rims will be straightforward to find and affordable for that vehicle.
What to do if you cannot find the information
Call a tire shop with your vehicle's year, make, model, and trim level. They can look up the bolt pattern in their system in under a minute. This service is free — they are not charging you to look something up, and they hope you will buy tires or rims from them later.
You can also visit the manufacturer's website and use their build-and-price tool. Enter your vehicle details and it will show you the wheel options, including bolt pattern, for that configuration. This works even for vehicles no longer in production.
If your vehicle is heavily modified or has non-original wheels, a shop may need to see the vehicle in person to measure. But for any stock vehicle, a phone call solves it.
Frequently Asked Questions
Can I use a rim with a different bolt pattern if I use wheel spacers?
No. Wheel spacers move the rim outward but do not change where the bolt holes line up. A mismatched bolt pattern will still not seat properly, and spacers can make the problem worse by putting uneven stress on the hub. The bolt pattern must match exactly.
What if my vehicle has different bolt patterns on front and rear wheels?
Some trucks and performance cars do use different patterns front and rear. Your manual will list both. When you shop for rims, you need to know which set you are replacing — front, rear, or all four — because you cannot swap them between axles.
Do all rims of the same size have the same bolt pattern?
No. Two 18-inch rims can have completely different bolt patterns. Size and bolt pattern are separate specifications. You must match both when buying replacement wheels.
If I buy used rims, how do I verify the bolt pattern before I pick them up?
Ask the seller to measure from the center of one hole to the center of the hole directly across, and count the holes. Ask them to do this while you are on the phone or video call so you can watch. If they cannot or will not measure, do not buy them — it takes 30 seconds and a ruler.
Will a tire shop charge me to measure my bolt pattern?
No. Measuring your bolt pattern is a basic lookup that takes under a minute. Tire shops do this for free as part of customer service. They may charge you if you ask them to do extensive work like removing a wheel to measure, but a phone call with your vehicle details costs nothing.