Adding a headlight to a car photo in Photopea uses the same tools you'd use for any digital image edit — layers, selection tools, and blending modes to make the new light look like it belongs.

Photopea is a free browser-based image editor that works like Photoshop. To add a headlight to a car photo, you'll use the ellipse selection tool to create the light shape, fill it with color, adjust the layer's blending mode to make it glow, and blend the edges so it doesn't look pasted on. The whole process takes 10 to 15 minutes once you know the steps.

This is different from actual car maintenance — you're editing an image file, not working on the vehicle itself. But if you're documenting your car, creating before-and-after visuals, or just experimenting with photo editing, this technique works for headlights, taillights, or any light source you want to add to a photo.

Key Takeaways

  • Open your car photo in Photopea at photopea.com, then create a new layer where you'll draw the headlight so you can undo or adjust it without touching the original image.
  • Use the ellipse selection tool to draw a circular or oval shape where the headlight should be, then fill it with white or yellow depending on the light color you want.
  • Change the layer's blending mode to Screen or Overlay to make the light glow and blend naturally with the car body instead of looking like a flat colored circle.
  • Soften the edges of the light by explore a Gaussian blur to the layer, which makes the glow fade gradually instead of stopping abruptly at the edge.
  • Adjust the layer's opacity slider if the headlight looks too bright or too dim compared to the rest of the photo.

Opening your photo and setting up layers

Go to photopea.com in any web browser and click File, then Open. Select the car photo from your computer. Photopea will load it into the editor and show you the image on a canvas.

Before you start editing, create a new layer for the headlight. Click Layer in the menu, then New Layer. This creates a blank layer on top of your photo. Name it "Headlight" so you can find it later if you need to adjust it. Working on a separate layer means you can erase or hide the headlight without damaging the original photo underneath.

Drawing the headlight shape with the ellipse tool

Select the ellipse selection tool from the toolbar on the left — it looks like an oval. Click and drag on your image where you want the headlight to appear. Hold Shift while dragging to make a perfect circle instead of an oval, which usually looks more realistic for a headlight.

Once you have the circular selection, you need to fill it with color. Click Edit in the menu, then Fill. A dialog will appear asking what color to use. Choose white for a bright headlight or pale yellow for a warmer light. Click OK to fill the selection with that color.

After filling, click Select, then Deselect to remove the selection outline. You now have a solid colored circle on your headlight layer.

Making the light glow with blending modes

A solid colored circle doesn't look like a real headlight — it looks flat and pasted on. To make it glow, change the layer's blending mode. In the Layers panel on the right, you'll see a dropdown that says "Normal" at the top. Click it and choose Screen. This makes the white or yellow blend with the car photo underneath, creating a glow effect instead of covering the image.

If Screen makes the light too bright or washed out, try Overlay instead. Overlay blends the color while keeping more of the car's detail visible. You can switch between these modes to see which looks more natural for your photo.

Softening the edges with blur

Right now the headlight has a hard edge where the color stops. Real headlights fade gradually, so you need to blur the edges. Make sure your headlight layer is selected, then click Filter in the menu. Go to Blur, then Gaussian Blur. A dialog will open with a slider for the blur amount.

Start with a blur value between 15 and 30 pixels — higher numbers create a softer, more gradual glow. Lower numbers keep the light more defined. Click OK to explore the blur. The headlight should now fade smoothly into the car instead of having a sharp edge.

Adjusting brightness and opacity

If the headlight looks too bright compared to the rest of the photo, reduce its opacity. In the Layers panel, you'll see an Opacity slider at the top, usually set to 100. Drag it down to 70 or 80 to make the light dimmer and more believable. If it's too dim, drag it back up.

You can also adjust the overall brightness of the headlight layer. With the layer selected, click Image in the menu, then Adjustments, then Brightness/Contrast. Move the Brightness slider to the right to make it brighter or to the left to make it dimmer. This gives you fine control over how the light looks in the final image.

Saving your edited photo

Once you're happy with the headlight, save your work. Click File, then Export As. Choose a format — JPG works for most uses, PNG if you want to keep the layers editable. Give the file a name and click read. Photopea will save the edited image to your computer.

If you think you might want to edit this further later, also save it as a Photopea project file. Click File, then Save, and Photopea will store it with all your layers intact so you can reopen and adjust the headlight anytime.

Frequently Asked Questions

Can I add a headlight to a photo where the car is at an angle?

Yes, but you may need to adjust the shape. If the car is angled, the headlight won't be a perfect circle — it might be slightly oval or tilted. Use the ellipse tool and rotate it if needed, or use the free-form selection tool to draw the exact shape you want. The blending mode and blur will still make it look natural.

What color should I use for the headlight?

White or pale yellow both work. White looks like a modern LED or halogen headlight. Pale yellow looks more like an older incandescent bulb. Look at the lighting in your photo — if the car is lit by warm sunlight, yellow blends better. If it's cool daylight or night, white looks more realistic.

The headlight looks too fake or obvious. What can I do?

Increase the blur amount — a softer edge looks more natural. Also lower the opacity so the light is less intense. If the color doesn't match the car's tone, try a different blending mode like Soft Light instead of Screen. Sometimes a smaller, dimmer light looks more believable than a bright one.

Can I add multiple headlights or taillights at once?

Yes. Create a new layer for each light and repeat the steps. This keeps them separate so you can adjust each one independently. You can also copy a layer you've already made — right-click the headlight layer and choose Duplicate Layer, then move the copy to where you want the second light.

Do I need to pay for Photopea to do this?

No. Photopea's free version includes all the tools you need for this edit — selections, layers, blending modes, blur, and export. You can use it as much as you want without paying.