Ignition coil replacement typically costs between $150 and $500 per coil, including parts and labour, depending on your vehicle and which coil has failed.

The price breaks into two parts: the coil itself (usually $50 to $250) and the labour to remove and install it (usually $100 to $300). A four-cylinder engine has one coil; a six-cylinder or eight-cylinder engine has multiple coils, so replacing more than one coil in the same visit costs more overall. Independent shops tend to charge less than dealerships for the same work, sometimes by $100 or more per coil.

The wide range exists because coil design varies enormously between manufacturers. A coil for a Honda Civic costs far less than one for a BMW or a truck with a high-output engine. Labour time also varies: some coils sit on top of the engine and take 15 minutes to reach; others sit deep in the engine bay under other components and take an hour. Your mechanic can give you a firm quote only after seeing your specific vehicle.

Key Takeaways

  • A single ignition coil replacement costs $150 to $500 total, with the coil itself accounting for $50 to $250 of that.
  • Multi-cylinder engines have multiple coils, and replacing more than one in the same service visit increases the total cost but saves on labour per coil.
  • Independent repair shops usually charge $50 to $150 less per coil than dealerships for identical work.
  • The coil's location on your engine determines labour time; coils buried under other components cost more to access than coils on top of the engine.

Why ignition coils fail and what happens when they do

An ignition coil converts low-voltage electricity from your battery into the high-voltage spark that fires your spark plugs. Over time, heat, moisture, and electrical stress degrade the coil's internal windings. When a coil fails, it stops producing spark to one or more cylinders, and your engine misfires.

A misfire feels like a hesitation or stumble when you accelerate, or a rough idle when you are stopped. You will also see the check engine light on your dashboard. The engine still runs, but it runs poorly and wastes fuel. Continuing to drive on a failed coil damages the catalytic converter (a much more expensive repair), so replacing the coil promptly matters.

Coils fail one at a time, not all together. If your engine has eight coils and one fails, you replace that one coil. However, if multiple coils are old and close to failure, replacing them all in one service visit costs less per coil in labour than returning to the shop later for a second coil.

What you pay at a dealership versus an independent shop

Dealerships source coils directly from the manufacturer and charge a markup on parts. They also charge higher labour rates—often $100 to $150 per hour compared to $75 to $100 at independent shops. For a coil that takes one hour to install, a dealership might charge $300 to $400 total; an independent shop might charge $180 to $250.

Independent shops buy coils from aftermarket suppliers, which are usually identical in function to OEM (original equipment manufacturer) coils but cost less. Some independent shops also stock used coils pulled from salvage vehicles, which cost even less but carry no warranty. Ask your mechanic whether they offer OEM, new aftermarket, or used coils, and what warranty comes with each option.

Dealership coils come with the manufacturer's warranty, usually covering defects for one to three years. Aftermarket coils from reputable brands (Bosch, Denso, Motorcraft) typically carry a one-year warranty. Used coils usually carry no warranty. If a coil fails again within the warranty period, the shop replaces it at no charge.

Labour time depends on coil location and engine design

On some vehicles, the coil pack sits directly on top of the engine, held by two bolts. Removing the old coil and installing the new one takes 15 to 30 minutes. Your mechanic disconnects the electrical connector, unbolts the coil, and bolts the new one in place.

On other vehicles, the coil is buried under the intake manifold, valve cover, or other engine components. Removing those parts first adds 30 minutes to an hour of labour. On some luxury vehicles or trucks with tight engine bays, accessing a single coil can take two hours or more. This is why labour costs vary so widely even for the same brand of coil.

Before you book a service, ask your mechanic how long the job will take on your specific vehicle. That time, multiplied by the shop's hourly labour rate, tells you what labour will cost. Add the coil price, and you have your total.

Signs that your ignition coil is failing

The most obvious sign is a check engine light paired with a misfire. Your mechanic will read the diagnostic code to confirm which coil has failed. Codes like P0300 (random misfire) or P0301 (cylinder 1 misfire) point directly to the coil.

You may also notice the engine running rough at idle, hesitating during acceleration, or losing power when you drive uphill. Fuel economy drops because the engine is not burning fuel efficiently. In cold weather, a failing coil often gets worse because cold makes the internal resistance higher.

Do not ignore these signs. Driving on a failed coil allows unburned fuel to enter the catalytic converter, where it ignites and damages the converter's internal structure. A new catalytic converter costs $800 to $2,500, so replacing the coil promptly saves money in the long run.

Whether to replace one coil or all coils at once

Replace only the failed coil if the others are relatively new. If your vehicle has 80,000 miles and one coil fails, the others likely have years of life left. Replacing all of them wastes money.

However, if your vehicle has 120,000 miles or more and one coil has failed, the others are aging too. Coils that are close in age tend to fail within months of each other. Some mechanics recommend replacing all coils at once in high-mileage vehicles to avoid a second service visit soon after. The extra cost upfront (perhaps $300 to $600 more) may be worth avoiding another trip to the shop.

Ask your mechanic whether the other coils show signs of wear during the inspection. If they do, replacing them together makes sense. If they look fine, replace only the failed one and monitor the others.

Frequently Asked Questions

Can I drive with a bad ignition coil?

You can drive short distances, but you should not. A misfire damages the catalytic converter over time, and that repair costs far more than replacing the coil. Have the coil replaced as soon as you can.

How long does an ignition coil last?

Most coils last 80,000 to 150,000 miles, depending on engine heat, moisture, and electrical load. Some fail earlier; some last longer. There is no set replacement interval—you replace them only when they fail.

Is an aftermarket coil as good as an OEM coil?

Yes, if it comes from a reputable brand like Bosch, Denso, or Motorcraft. These coils meet the same electrical specifications as OEM coils and carry a warranty. Avoid very cheap coils from unknown brands, as they may fail sooner.

Will replacing the ignition coil fix my check engine light?

Yes, once the new coil is installed and the engine runs without misfires, your mechanic will clear the diagnostic code and the light will turn off. If the light returns after a few days, another coil may be failing.

Should I replace spark plugs at the same time as the ignition coil?

Not necessarily. Spark plugs and coils are separate components with different lifespans. Replace spark plugs only if they are due based on your vehicle's maintenance schedule, not just because you are replacing a coil.