New engine prices range from $3,000 to $10,000 or more, depending on whether you buy a long-block, short-block, or complete engine, and whether it comes from the manufacturer, a rebuilder, or a salvage yard

The price you pay for a new motor depends almost entirely on what you're buying. A long-block engine — the block, heads, crankshaft, and internal parts, but not the accessories bolted to the outside — typically costs $2,500 to $4,500 for a common four-cylinder and $4,000 to $8,000 for a V8. A short-block — just the block, crankshaft, and pistons — runs $1,500 to $3,500. A complete engine with all accessories, ready to bolt in, costs $4,000 to $10,000 or more. Labor to install any of these usually adds $1,500 to $3,000 on top of the parts cost.

Where you source the engine matters as much as what type it is. A factory remanufactured engine from the original manufacturer carries a warranty and costs the most. A rebuilt engine from a third-party rebuilder costs less but the warranty varies. A used engine pulled from a salvage vehicle is cheapest but comes with no warranty and unknown mileage history. For a 2015 Honda Civic, a factory remanufactured engine might cost $4,500, a rebuilt version $2,800, and a used engine $800 to $1,200.

Key Takeaways

  • A long-block engine (the most common choice for replacement) costs $2,500 to $8,000 depending on the vehicle, plus $1,500 to $3,000 in labor.
  • Factory remanufactured engines cost more but include a full warranty; rebuilt engines from independent shops cost less with variable warranties; used engines are cheapest with no warranty.
  • The year, make, and model of your vehicle determines the base price more than anything else — a four-cylinder engine costs significantly less than a V8 in the same vehicle.
  • Installation labor often costs as much as or more than the engine itself, so get quotes from at least two shops before committing.

Factory remanufactured engines versus rebuilt and used

A factory remanufactured engine is disassembled, inspected, and rebuilt to original specifications by the vehicle manufacturer or an authorized facility. It comes with a warranty — typically three years or 100,000 miles — and costs the most. For a 2012 Ford F-150, expect to pay $5,500 to $6,500 for a factory remanufactured 5.0L V8. You order it through a Ford dealer, and the dealer handles installation.

A rebuilt engine from an independent rebuilder goes through the same process but is not backed by the manufacturer. The warranty varies: some shops offer three years, others one year, and some offer none. The price is usually 30 to 50 percent lower than factory remanufactured. The same Ford F-150 engine from a rebuilder might cost $3,500 to $4,500. Quality varies by shop, so ask for references and check whether the rebuilder is certified by the National Association of Engine and Equipment Rebuilders (NAEER).

A used engine pulled from a salvage vehicle is the cheapest option — often $800 to $2,000 for a common engine — but comes with no warranty and unknown history. You don't know how many miles it has, how it was driven, or whether it has internal damage. Some salvage yards offer a 30-day return window if the engine fails when ready, but that's not a warranty. Used engines make sense only if you're on a tight budget and willing to accept the risk, or if you're buying a parts car to harvest the engine yourself.

How vehicle year, make, and model affect the price

The single biggest factor in engine cost is what vehicle you own. A four-cylinder engine for a Honda Civic costs $2,500 to $4,000 new (rebuilt). The same engine for a Toyota Corolla costs roughly the same. A V6 for a Toyota Camry costs $3,500 to $5,500. A V8 for a Chevrolet Silverado costs $4,500 to $7,000. A turbocharged four-cylinder for a BMW or Audi costs $5,000 to $8,000 because those engines are more complex and fewer rebuilders stock them.

Older vehicles sometimes have cheaper engines because demand is lower and salvage yards have more inventory. A 2005 Honda Civic engine might cost $600 to $1,200 used. Newer vehicles have higher prices because fewer are in salvage yards yet. A 2020 Civic engine costs $1,500 to $2,500 used. Luxury and performance vehicles always cost more — a used engine for a BMW M340i or Audi S4 can run $2,500 to $4,000 even from salvage.

Long-block versus short-block versus complete engine

A short-block includes the engine block, crankshaft, connecting rods, and pistons. It does not include the cylinder head, valves, or any accessories. You must buy or reuse the head, intake manifold, alternator, water pump, and other bolt-on parts. A short-block costs $1,500 to $3,500 and makes sense only if you already have good used heads or if you want to upgrade to performance heads. Most DIY rebuilders and shops choose short-blocks because they can customize the top end.

A long-block includes everything a short-block does, plus the cylinder head, valves, and valve train. It does not include the intake manifold, alternator, water pump, power steering pump, or air conditioning compressor. You must transfer these accessories from your old engine or buy them new. A long-block costs $2,500 to $8,000 and is the most common choice for a straightforward engine replacement because it cuts labor time and reduces the chance of mistakes during reassembly.

A complete engine or crate engine includes the long-block plus all accessories — intake, alternator, water pump, oil pan, and sometimes even the engine harness and computer. It's ready to bolt in with minimal additional work. A complete engine costs $4,000 to $10,000 or more and saves the most labor time. For someone paying a shop to do the work, the extra upfront cost often pays for itself in reduced installation labor.

Labor costs and what they include

Installation labor varies by shop, vehicle, and engine type. A straightforward swap — removing the old engine and bolting in a new one — typically costs $1,500 to $2,500 at an independent shop. A dealership charges $2,500 to $4,000 for the same work. If the new engine requires new engine mounts, hoses, belts, or gaskets, add $300 to $800. If the old engine seized and broke bolts or studs in the block, add $500 to $1,500 for extraction and repair.

Get a written estimate before you commit. The estimate should list the engine cost, labor hours, parts (gaskets, belts, hoses, fluids), and any additional work the shop discovers during removal. Ask whether the shop will reuse your old accessories (alternator, water pump, power steering pump) or replace them. Reusing saves money but adds risk if those parts are worn. Replacing costs $500 to $1,500 but gives you peace of mind.

Where to buy a new engine

A dealership is the most expensive source but the safest. They sell factory remanufactured engines with a full warranty and handle installation. Call your local dealer and ask for the parts department. They will give you a price and lead time — usually two to four weeks for a remanufactured engine.

An independent machine shop or engine rebuilder is cheaper and often faster. Search online for "engine rebuilder near me" or ask your mechanic for a referral. Call at least two shops, describe your vehicle and engine, and ask for a price on a long-block or complete engine. Ask about the warranty, how long it takes, and whether they install it or just sell it. Many rebuilders will install their own engines for a discount.

A salvage yard or online salvage marketplace (LKQ, Copart, eBay Motors) offers the cheapest used engines. Call local salvage yards first — they can tell you when ready if they have your engine in stock and what condition it's in. Online marketplaces require shipping, which adds $300 to $800. Inspect a used engine in person if possible, or buy from a yard that offers a return window.

Signs you need a new engine versus repair

An engine replacement makes financial sense when repair costs exceed 50 to 60 percent of the vehicle's current value. If your 2010 Honda Civic is worth $6,000 and a head gasket repair costs $2,500, repair it. If the engine has a cracked block or spun bearing and repair costs $4,500, a $3,000 rebuilt engine plus $2,000 labor ($5,000 total) is comparable — but the rebuilt engine comes with a warranty and the repair does not.

Replace the engine if it has catastrophic internal damage: a cracked block, spun bearing, scored cylinder walls, or metal in the oil. These cannot be repaired affordably. Replace it if the vehicle has high mileage (over 150,000 miles) and the engine has failed — the cost of repair often equals or exceeds the cost of replacement, and a replacement engine buys you another 100,000 miles of reliable service.

Frequently Asked Questions

Can I install a used engine myself to save money?

Yes, if you have mechanical experience and the right tools. You'll save $1,500 to $3,000 in labor. However, you'll need an engine hoist, jack stands, a torque wrench, and a service manual for your vehicle. If something goes wrong — a broken bolt, a misaligned gasket, an incorrect torque specification — you could damage the engine or create a safety hazard. Most people hire a shop.

What's the difference between a remanufactured and rebuilt engine?

Remanufactured engines are rebuilt to original manufacturer specifications by the manufacturer or an authorized facility and come with a full warranty. Rebuilt engines are rebuilt by independent shops to varying standards and come with warranties that range from one year to three years or none at all. Remanufactured costs more but is more predictable.

How long does an engine replacement take?

Removal and installation typically takes three to five days at a shop, depending on how accessible the engine is and whether complications arise. If the shop must order the engine, add two to four weeks. A complete engine swap from start to finish — order, delivery, removal, installation, testing — usually takes four to six weeks.

Will a used engine from a salvage yard last as long as a rebuilt one?

Not necessarily. A used engine has unknown history and mileage. It may last 50,000 miles or 150,000 miles. A rebuilt engine has been inspected and rebuilt to known standards and typically comes with a warranty of one to three years. If longevity matters, a rebuilt engine is worth the extra cost.

Should I replace the water pump and alternator while the engine is out?

Yes, if they are over 80,000 miles old or showing wear. The labor to replace them is already paid for since the engine is out. A new water pump costs $150 to $300 and an alternator costs $300 to $600. Replacing them now prevents a breakdown later and is cheaper than paying labor to remove the engine again in two years.