Remote start installation runs between $300 and $1,500 depending on your vehicle, the system you choose, and who installs it
The price breaks into two parts: the hardware itself and the labor to wire it in. A basic aftermarket remote start system costs $100 to $400 new, while premium systems with smartphone control run $300 to $800. Installation labor typically ranges from $200 to $800, though some shops charge flat rates and others charge hourly. Your vehicle's complexity matters most — a straightforward sedan takes three to five hours, while a truck with push-button start or a car with an immobilizer can take twice as long.
Where you go changes the price significantly. Independent car alarm shops and mobile installers often undercut dealerships by 30 to 50 percent. A dealership installation might cost $800 to $1,500 total, while an independent shop might charge $400 to $900 for the same work. Big-box retailers like Best Buy or Walmart offer installation but typically only for their own systems, and their labor costs fall in the middle range.
Key Takeaways
- Hardware costs $100 to $800 depending on features; labor costs $200 to $800 depending on your vehicle's wiring complexity and the shop's hourly rate.
- Independent car alarm shops are usually 30 to 50 percent cheaper than dealerships for the same work, though quality varies by installer.
- Push-button start vehicles and cars with immobilizers cost more to install because the wiring is more complex and requires integration with existing systems.
- Getting a quote from at least two shops before committing protects you from overpricing and lets you compare warranty terms.
What the hardware itself costs
Aftermarket remote start systems fall into three tiers. Basic systems ($100 to $250) let you start the car from a key fob at a distance of 500 to 1,000 feet. They typically include one or two fobs and a straightforward receiver module that wires into your ignition and starter circuits. These work on most vehicles but offer no smartphone integration or advanced features.
Mid-range systems ($250 to $500) add features like two-way confirmation (your fob beeps when the car starts), longer range, and sometimes a bypass module for vehicles with immobilizers. Premium systems ($500 to $800) include smartphone apps, GPS tracking, climate control integration, and compatibility with voice assistants. Brands like Viper, Compustar, and Avital dominate the aftermarket, though dozens of smaller manufacturers exist.
OEM (original equipment manufacturer) remote start, if your vehicle offers it as a factory option or retrofit, costs $400 to $1,200 for the hardware alone. Factory systems integrate more cleanly with your vehicle's electronics and often carry longer warranties, but you cannot shop around — you buy from the dealership.
Labor costs depend on your vehicle type and shop choice
A technician charges for the time it takes to run wires through your dashboard, integrate the system with your ignition and starter, and test everything. On a straightforward vehicle — a sedan or hatchback with a traditional key ignition — this takes three to five hours. At $50 to $100 per hour (typical independent shop rates), that is $150 to $500 in labor.
Vehicles with push-button start cost more because the technician must integrate the remote start module with your vehicle's smart key system and immobilizer. This often requires a bypass module ($50 to $150 extra) and adds two to four hours of labor. Luxury vehicles, trucks with complex electrical systems, and cars with integrated climate control can push the total labor to eight hours or more.
Dealership labor rates run $100 to $150 per hour in most markets, so the same five-hour job costs $500 to $750 at a dealership versus $250 to $500 at an independent shop. Some shops quote a flat rate for common vehicles (often $400 to $600) rather than charging hourly, which can work in your favor if the job runs long.
Where to get installation and what each option costs
Independent car alarm and electronics shops typically offer the lowest total cost. They specialize in aftermarket systems, stock multiple brands, and can often install the same day or within a few days. Expect to pay $400 to $900 total for hardware and labor combined. The trade-off is that warranty coverage is limited to what the shop offers (usually one to two years on labor), and quality varies widely depending on the installer's experience.
Dealerships charge the most but offer the tightest integration with your vehicle's factory systems. A dealership installation runs $800 to $1,500 total and usually includes a three-year or longer warranty on both parts and labor. Dealerships also keep detailed records of the work, which can matter if you sell the vehicle. The downside is longer wait times — many dealerships book installations weeks out.
Best Buy and Walmart install remote start systems they sell in-store. Their labor rates fall between independent shops and dealerships, typically $300 to $600 for installation. They offer a one-year labor warranty and can often schedule installation within a few days. However, you are limited to the systems they stock, which is usually a smaller selection than a dedicated car electronics shop carries.
Mobile installers come to your home or workplace and perform the work on-site. Pricing is similar to independent shops ($400 to $900 total), and convenience is the main advantage. The downside is that if something goes wrong during installation, you have fewer resources to fix it than you would at a physical shop.
Why push-button start and immobilizers add cost
Vehicles with push-button start do not have a traditional ignition switch that a remote start module can straightforward wire into. Instead, the system must communicate with your vehicle's smart key receiver and engine control module. This requires a bypass module — a separate device that tricks the car into thinking the smart key is present — and careful integration to avoid triggering security warnings or disabling other features.
An immobilizer is a security chip in your key fob that prevents the engine from starting unless the correct key is detected. Remote start systems must bypass this safely, which adds complexity and cost. Some vehicles require the bypass module to be programmed to your specific vehicle's security system, a step that can take an hour or more and requires specialized diagnostic equipment.
Luxury brands like BMW, Mercedes, and Audi often have the most complex immobilizer systems, which is why remote start installation on these vehicles can cost $1,200 to $1,500. Some independent shops refuse to install on certain luxury vehicles because the integration is too risky or time-consuming.
Getting quotes and comparing options
Call or visit at least two shops before deciding. Provide your vehicle's year, make, model, and trim level, and ask for a quote that breaks down hardware cost, labor cost, and warranty terms separately. A good quote includes the specific system brand and model, the labor hours estimated, and what is covered under warranty.
Ask each shop whether they stock the system or order it, and how long installation takes. If a shop quotes significantly lower than others, ask why — it might be because they use a cheaper system, or it might be because they are running a promotion. If it is significantly higher, ask what extra features or warranty coverage justify the price.
Check online reviews for the specific shop, particularly on Google and Yelp, and look for comments about installation quality and whether systems still work months later. A shop with dozens of five-star reviews and a few complaints about installation quality is usually safer than a shop with no reviews or mostly negative ones.
Warranty and what happens if something fails
Most aftermarket systems come with a one-year manufacturer warranty on the hardware. Independent shops typically warranty their labor for one to two years, meaning if the system stops working due to a wiring mistake, they will fix it for free during that period. Dealerships usually offer longer labor warranties, often three years or more.
After the warranty expires, repairs cost $100 to $300 depending on what failed. A dead fob battery costs $20 to $50 to replace. A failed receiver module costs $150 to $400 to replace and reinstall. If the wiring is damaged, repair costs depend on what was damaged and how accessible it is.
Keep your receipt and warranty paperwork. If you sell the vehicle, the warranty may transfer to the new owner, which can increase the car's resale value slightly. Some buyers specifically look for vehicles with remote start already installed because they avoid the installation cost themselves.
Frequently Asked Questions
Can I install remote start myself if I have basic electrical knowledge?
Most people should not attempt this. Remote start requires integrating with your vehicle's ignition, starter, and sometimes immobilizer — mistakes can damage your electrical system, disable your car, or trigger security features that prevent the engine from starting. If you have professional automotive electrical experience, it is possible, but the risk is high.
Does remote start void my vehicle's warranty?
Not automatically, but it depends on your manufacturer and what fails. If the remote start system causes damage to your vehicle's electrical system, the manufacturer may deny a warranty claim for that damage. Dealership installations are safer because they use factory-approved methods, while aftermarket installations carry more risk. Check your warranty paperwork or call your dealership to ask.
Will remote start work if my car is locked?
Yes. Remote start systems bypass the lock — the engine starts, but the doors remain locked. This is a security feature. You unlock the doors separately with your key fob or smart key before you can open them. Some premium systems let you unlock the doors through a smartphone app at the same time you start the engine.
How long does a remote start fob battery last?
Typically two to four years depending on how often you use it. When the battery dies, the fob stops working, but your car still starts normally with your regular key. Replacing the battery costs $5 to $15 if you do it yourself, or $20 to $50 if a shop does it. Most shops replace it while you wait.
Can I add remote start to a vehicle that already has a factory remote start system?
Usually not without removing the factory system first, which is expensive and often not worth it. If your factory system is broken, contact your dealership about repair or replacement. If you want a different brand or additional features, ask a shop whether they can upgrade your existing system rather than installing a second one.