Engine replacement typically costs between $4,000 and $15,000 for most vehicles, depending on whether you choose a new, rebuilt, or used engine
The final bill depends on three things: the engine itself, labour, and your vehicle's make and model. A new engine from the manufacturer costs the most. A rebuilt engine—one that has been disassembled, inspected, and reassembled to factory specifications—costs less but still carries a warranty. A used engine pulled from a salvage vehicle costs the least but comes with the most uncertainty about remaining life.
Labour is where the real variation happens. Replacing an engine in a compact sedan might take 8 to 12 hours. The same job in a truck with the engine mounted sideways or tucked deep in the bay can take 20 hours or more. At $100 to $200 per hour at an independent shop, or $150 to $300 at a dealership, labour alone can swing your total by thousands of dollars.
Before you get a quote, understand what actually broke. If your engine seized because you ran it out of oil, replacement is your only path. If a head gasket failed and coolant mixed with oil, a rebuild might be possible and far cheaper. A mechanic needs to see the engine in person to tell you which situation you have.
Key Takeaways
- New engines cost $4,000 to $8,000 plus labour; rebuilt engines cost $2,500 to $5,000 plus labour; used engines cost $800 to $2,500 plus labour.
- Labour time varies wildly by vehicle design—a straightforward replacement might take 8 hours, while others take 20 or more.
- A seized engine from neglect or a cracked block usually requires replacement, but some failures like head gasket leaks can be repaired for a fraction of the cost.
- Dealerships charge more per hour than independent shops, but sometimes stock the exact engine your vehicle needs, reducing total time.
- Getting a second opinion from another mechanic before committing to replacement can save you thousands if a repair is actually possible.
New engines from the manufacturer versus rebuilt and used options
A new engine from the vehicle manufacturer comes with a full warranty, usually 3 years or 36,000 miles. It has zero miles on it and will perform exactly like the original. The trade-off is cost: you are paying for that certainty. A new engine for a Honda Civic might run $3,500 to $4,500 before labour. For a larger vehicle like a pickup truck, expect $5,000 to $8,000 or more.
A rebuilt engine has been taken apart, cleaned, inspected for wear, and reassembled with new gaskets, seals, and often new pistons and rings. The block and heads are the original castings, but the internal parts that wear are replaced. Rebuilt engines typically carry a 12-month or 12,000-mile warranty. They cost 40 to 60 percent less than new. A rebuilt engine for that Civic might be $1,800 to $2,500. The risk is lower than a used engine but higher than new—you are trusting the rebuilder's inspection process.
A used engine pulled from a salvage vehicle is the cheapest option, often $800 to $2,000 depending on mileage and condition. It comes with whatever warranty the salvage yard offers, which might be 30 days or none at all. You do not know how the previous owner treated it, whether it was in an accident, or how many miles remain before the next failure. Used engines make sense only if you are buying a vehicle you plan to drive into the ground and cannot afford anything else.
Labour costs and why they vary so much between vehicles
An engine replacement is not a straightforward bolt-on job. The mechanic has to drain fluids, disconnect dozens of hoses and electrical connectors, remove the radiator and other cooling components, unbolt the engine mounts, and lift the engine out. Then the reverse: install the new engine, reconnect everything, refill fluids, and test. A straightforward job takes 8 to 12 hours.
Some vehicles make this much harder. Front-wheel-drive cars often have the engine mounted sideways, which means more components have to come out to reach it. Luxury vehicles and some trucks have the engine buried under layers of plastic covers and auxiliary systems. A Subaru with a horizontally-opposed engine or a Range Rover with everything stacked tight might need 18 to 24 hours. That difference alone can add $1,200 to $3,600 to your bill.
Dealerships usually charge $150 to $300 per hour. Independent shops typically charge $100 to $200 per hour. On a 12-hour job, that is a $600 to $2,400 difference just in labour rate. Some dealerships have the engine in stock and can start when ready; independent shops may have to order it, adding days to the timeline but not necessarily to the cost.
When replacement is necessary versus when repair might work
A seized engine—one that will not turn over at all—almost always needs replacement. This happens when oil starvation causes metal-to-metal contact, or when coolant freezes in the block and cracks it. A seized engine cannot be repaired economically. The same is true for a cracked block, which you might discover only after the engine is removed and inspected. A crack in the casting means oil or coolant will leak out, and welding a block is temporary at best.
A failed head gasket is different. The head gasket seals the cylinder head to the block. When it fails, coolant leaks into the oil or combustion gases escape into the cooling system. The engine still runs, but it overheats and loses power. A head gasket replacement costs $1,500 to $3,000 in labour and parts—a fraction of engine replacement. A mechanic can diagnose this with a compression test or by looking at the oil (it will be milky if coolant is mixed in).
A failed timing belt can cause catastrophic damage if the belt breaks while the engine is running. Some engines are "interference" designs where the pistons and valves occupy the same space; if the belt breaks, they collide and bend the valves or crack the piston. Other engines are "non-interference" and just stop running. If you have an interference engine and the belt breaks, you may need a new engine. If you have a non-interference engine, a belt replacement ($500 to $1,500) is all you need. Your mechanic can tell you which type you have by looking at your owner's manual or service records.
What happens after the engine is installed
Once the new engine is in place, the mechanic fills it with oil, coolant, and other fluids, then starts it and listens for leaks or unusual noises. They will run it at idle and under light load to check that all systems are working. This is not a full test drive yet—it is a safety check to make sure nothing is obviously wrong.
After that initial check, the vehicle should be driven gently for the first 500 to 1,000 miles. A new or rebuilt engine needs time for the piston rings to seat properly against the cylinder walls. Driving hard too soon can cause excessive oil consumption or ring wear. Your mechanic should give you written instructions on this break-in period.
You should also expect to return for an oil change sooner than normal—often at 500 or 1,000 miles instead of the usual interval. New engines shed metal particles during break-in, and the oil filter needs to catch them before they circulate through the engine.
Getting a second opinion before committing to replacement
Engine replacement is expensive enough that a second diagnosis is worth the $100 to $150 it usually costs. A different mechanic might spot a repair option the first one missed, or might confirm that replacement is truly necessary. This is especially important if the first mechanic is a dealership—they have less incentive to find a cheaper repair path.
When you take the vehicle to a second shop, bring the first mechanic's written diagnosis. Tell the second mechanic what symptoms you saw: overheating, loss of power, knocking, white smoke from the exhaust. Do not lead them toward a conclusion. A good mechanic will perform their own tests—compression test, leak-down test, oil analysis—rather than just accepting the first diagnosis.
If both mechanics agree that replacement is necessary, you have confidence in the decision. If they disagree, ask each one to explain their reasoning in writing. Then decide which diagnosis makes more sense based on what you actually observed in the vehicle.
Alternatives if replacement cost is too high
If the cost of replacement is more than the vehicle is worth, you have a few options. You can sell the vehicle as-is to a salvage yard or a dealer who buys problem cars. You will get far less than market value, but you avoid the replacement cost. Some people use this money to buy a used vehicle with a known-good engine.
You can also look into a crate engine from an aftermarket supplier. These are new or rebuilt engines sold by companies like Jasper Engines or Chevrolet Performance. They are often cheaper than OEM engines and come with longer warranties. The catch is that installation labour is the same, so you save money only on the engine itself.
If you own the vehicle outright and it is otherwise in good condition, you might also consider a short block or long block engine. A short block includes the block, crankshaft, and pistons but not the head, manifolds, or accessories. A long block adds the cylinder head. Both are cheaper than a complete engine and let you reuse your existing components, but installation is more complex and labour costs can be higher.
Frequently Asked Questions
Can I drive a car with a failing engine or should I stop when ready?
If the engine is overheating, making loud knocking, or losing power, stop driving it. Continuing to run a damaged engine can turn a repairable problem into one that requires replacement. If you see white smoke (coolant burning), blue smoke (oil burning), or the temperature gauge climbing, pull over and turn it off. Have it towed to a mechanic rather than driven.
Does engine replacement reset the mileage on my car?
No. The odometer records total miles the vehicle has travelled, not engine miles. A new engine does not reset it. Some states require disclosure that the engine has been replaced, and this should be noted in the service records. The vehicle's title does not change unless it was previously branded as salvage.
How long does an engine replacement take from start to finish?
The actual work usually takes 1 to 3 days depending on vehicle complexity and shop schedule. If the engine has to be ordered, add 3 to 7 days for delivery. Some shops can have a used engine in stock and start the same day. Ask the shop for a timeline before you commit, and get it in writing.
What warranty comes with a replacement engine?
New OEM engines typically come with 3 years or 36,000 miles. Rebuilt engines usually have 12 months or 12,000 miles. Used engines might have 30 days or no warranty at all. The labour on the installation itself is usually warranted for 12 months by the shop that did the work. Ask for all warranty terms in writing before the work begins.
Is it worth replacing an engine in an older car?
It depends on the vehicle's condition and your plans. If the rest of the car is solid and you plan to keep it for years, replacement might make sense. If the transmission is failing, the frame is rusting, or you were already thinking about selling it, replacement is probably not worth the cost. Compare the replacement cost to the vehicle's current market value and how long you plan to own it.