Remote car starter installation costs between $300 and $1,500 depending on your vehicle, the starter system you choose, and who installs it

The total price breaks into two parts: the device itself and the labour to wire it in. A basic aftermarket remote starter runs $100 to $400, while premium systems with smartphone control or integration into your car's factory system cost $400 to $800. Installation labour typically ranges from $200 to $800, depending on how accessible your ignition and electrical systems are. Some vehicles—particularly those with push-button start or advanced security systems—take longer to wire safely and cost more.

Where you have it installed matters. A car audio shop or independent installer usually charges less than a dealership, but a dealership can integrate the system with your factory electronics more seamlessly. If your vehicle has a modern security system, the dealership route often prevents warning lights or conflicts that cheaper installations might miss.

Key Takeaways

  • Basic remote starters cost $100 to $400; premium systems with smartphone features run $400 to $800, plus $200 to $800 in labour.
  • Push-button start vehicles and cars with advanced security systems cost more to install because the wiring is more complex and requires careful integration.
  • Car audio shops and independent installers are usually cheaper than dealerships but may not integrate as smoothly with factory electronics.
  • Installation time ranges from one to four hours depending on your vehicle's design, and some shops charge hourly rates while others quote a flat fee.

What the device itself costs

Aftermarket remote starters fall into three categories. Basic systems let you start your car from 500 feet away using a dedicated key fob; these cost $100 to $250. Mid-range systems add features like trunk pop, door locks, or panic buttons, and run $250 to $400. Premium systems connect to your smartphone via a cellular module, let you lock and unlock doors remotely, check fuel level, and set temperature preferences; these cost $400 to $800.

The brand matters less than the features you actually use. Viper, Compustar, and Avital are common names in the aftermarket space, but a $150 system from any of them does the same core job as a $300 one—it starts your car remotely. The extra cost buys convenience features and app integration, not reliability. If you only want to warm up your car on cold mornings, a basic system is enough.

Labour costs vary by vehicle type and installer

Installation labour is where the price spreads wide. A car audio shop or independent installer typically charges $200 to $500 for a straightforward installation on a vehicle with a traditional key-turn ignition. A dealership charges $400 to $800 for the same work, partly because they bill at higher hourly rates and partly because they take longer to may support the system doesn't conflict with factory electronics.

Some shops quote a flat fee for your specific vehicle; others charge hourly ($75 to $150 per hour) and estimate how long the job will take. Ask for both the flat fee and the hourly rate before you commit. A straightforward installation on a 2015 Honda Civic might take 1.5 hours; the same job on a 2022 vehicle with push-button start and a complex security system can take 3 to 4 hours.

Push-button start and security systems add cost

Vehicles with push-button start instead of a traditional key-turn ignition require the installer to tap into different electrical circuits. Instead of wiring to the ignition switch, they have to integrate with the car's smart key system, which is more involved. Expect to pay an extra $100 to $300 in labour on top of the base installation cost.

Modern security systems—particularly those with immobilizers that prevent the engine from running without the correct key fob—can also complicate installation. Some aftermarket starters work around this; others require the installer to reprogram the vehicle's security module. If your car has a factory alarm or a keyless entry system, tell the installer before they quote you. A dealership is often the safer choice for these vehicles because they have the factory documentation and diagnostic tools to avoid creating warning lights or disabling safety features.

Where to have it installed

You have three main options: a car audio or electronics shop, an independent automotive technician, and a dealership. Car audio shops are usually the cheapest and fastest for basic systems on older vehicles. They install remote starters regularly and have the tools ready. Independent technicians

Dealerships cost more but offer the best integration with your car's factory systems. They have access to the vehicle's technical manuals, can reprogram security modules if needed, and won't accidentally disable a safety feature. If your car is still under warranty, a dealership installation also means the work is documented in your service history, which can matter if a problem arises later.

Some retailers like Best Buy offer installation services through partner shops in your area. The device is usually cheaper than buying from a specialty shop, but you have less control over which installer does the work and how carefully they do it.

Hidden costs and what to watch for

The quoted price sometimes doesn't include everything. Ask whether the estimate covers the wiring harness (usually $20 to $50), the bypass module needed for some security systems (another $50 to $150), and any reprogramming fees if your vehicle requires it. Some shops charge extra to run wires through door seals or under trim panels neatly; others include that in the labour cost.

If your vehicle has a factory remote start option that was never activated, you might be able to have the dealer enable it instead of installing an aftermarket system. This costs $100 to $300 and integrates perfectly with your car's electronics, but it only works if the hardware is already there. Ask your dealership whether your specific model and year came with the option.

Warranty and reliability after installation

Most aftermarket remote starters come with a one- to three-year warranty covering the device itself. The installation labour is usually not warranted—if something fails after a year, you pay to have it fixed. A dealership installation typically includes a longer warranty on the work itself, which is worth the extra cost if you plan to keep the car for several years.

The most common failure point is not the starter itself but the wiring connections, especially if the installer ran wires carelessly or didn't seal them properly against moisture. A well-installed system from a reputable shop should work reliably for the life of the car. A cheap installation that cuts corners on wire routing or connections may fail within a year or two.

Frequently Asked Questions

Can I install a remote starter myself?

If you have electrical experience and a wiring diagram for your vehicle, yes—but most people should not attempt it. Mistakes can disable your car's security system, trigger warning lights, or create electrical shorts that damage the vehicle. The labour cost is worth paying to avoid those risks.

Will a remote starter void my warranty?

An aftermarket remote starter installed by a non-dealership shop will not automatically void your warranty, but if a problem arises that could be related to the installation—electrical issues, security system failures—the manufacturer may deny the claim. A dealership installation protects you because the work is factory-documented.

Does a remote starter drain my battery?

A properly installed remote starter draws minimal power when the car is off—typically less than a modern car alarm. The system is designed to shut down after a set time (usually 10 to 15 minutes) to prevent battery drain. If your battery drains quickly after installation, the installer may have wired it incorrectly.

Can I use a remote starter on a manual transmission car?

Most aftermarket remote starters will not start a manual transmission vehicle unless the car is in neutral and the clutch is fully released—a safety feature to prevent the car from lurching forward. Some premium systems can be programmed to work with manuals, but the installer needs to set it up correctly. Ask before you buy.

How long does installation usually take?

A straightforward installation on a vehicle with a traditional ignition takes one to two hours. Push-button start vehicles and those with complex security systems take three to four hours. Some shops can fit you in same-day; others book a few days out depending on how busy they are.