What you'll pay for a new bumper depends on whether you replace just the cover or the whole assembly

A new bumper cover alone runs $300 to $1,500 depending on your vehicle make and model. If you need the full bumper assembly — the cover plus the reinforcement bar and mounting hardware underneath — expect $500 to $2,500 before labor. Labor to remove the old bumper and install the new one typically costs $200 to $600 at a body shop or dealership, though some independent shops charge less. The final bill also depends on whether your bumper has sensors, cameras, or other electronics built in, which can add $500 to $2,000 to the parts cost alone.

Most people don't need to replace the entire assembly. If the damage is cosmetic — dents, cracks, or scuffs in the plastic cover — a new cover and paint job often costs less than replacing everything underneath. But if the reinforcement bar is bent or cracked, or if the mounting points are damaged, you'll need the full assembly.

Key Takeaways

  • A bumper cover alone costs $300 to $1,500 depending on your vehicle, while a full assembly with reinforcement bar runs $500 to $2,500.
  • Labor to install a new bumper ranges from $200 to $600, and some shops charge more if they have to remove other parts to access the bumper.
  • Bumpers with integrated sensors or cameras cost significantly more in parts — sometimes $1,000 to $2,000 extra — because the electronics must be transferred or replaced.
  • Aftermarket bumpers cost less than OEM (original equipment manufacturer) parts but may not fit as precisely or come with the same warranty.
  • Damage to the reinforcement bar or mounting points usually means you need the full assembly, not just a new cover.

Bumper cover versus full assembly: what's the difference

The bumper cover is the plastic or painted shell you see on the outside. The bumper assembly includes that cover plus the metal or plastic reinforcement bar bolted behind it, the mounting brackets, and any wiring for sensors or lights. If your bumper has only surface damage — a crack, dent, or scrape — replacing just the cover costs less and takes less labor time.

A full assembly replacement becomes necessary when the reinforcement bar is bent, when the mounting points are cracked or stripped, or when the damage is severe enough that the cover can't be safely reattached. Some shops will try to straighten a bent reinforcement bar rather than replace it, which costs $150 to $400 and takes a few hours. Whether that's worth doing depends on how badly it's bent and whether your insurance is covering the work.

OEM parts versus aftermarket: price and fit

OEM bumpers come directly from your vehicle's manufacturer and cost more but fit precisely and come with a warranty. An OEM bumper cover for a Honda Civic might cost $600 to $900, while an aftermarket equivalent runs $250 to $500. The difference widens for luxury vehicles: an OEM bumper for a BMW or Mercedes can easily exceed $2,000, while an aftermarket option might be half that.

Aftermarket bumpers are made by third-party manufacturers and sold through auto parts retailers, online marketplaces, or independent body shops. They fit most vehicles in their class but sometimes require minor adjustments or drilling new mounting holes. Some aftermarket bumpers are high-quality and nearly identical to OEM parts; others have visible gaps or require extra shimming to align properly. Ask your shop whether they've installed the specific aftermarket part you're considering and what adjustments it typically needs.

Labor costs and what affects them

Removing and installing a bumper usually takes 1 to 3 hours of labor. A shop charging $100 to $150 per hour will bill $100 to $450 for the job. Dealerships typically charge $150 to $200 per hour, so the same work costs $150 to $600. Independent body shops often fall in the middle, around $80 to $120 per hour.

Labor costs rise if the bumper has integrated sensors, cameras, or parking information systems. These electronics must be carefully disconnected, transferred to the new bumper, or reprogrammed. A bumper with front and rear sensors might add 1 to 2 hours of labor, pushing the total to $200 to $800 just for installation. If the new bumper doesn't have the same sensor mounts, the shop may need to fabricate brackets or modify the bumper, which adds more time and cost.

Some vehicles require removing other parts to access the bumper — headlights, fenders, or trim pieces. A Subaru or Audi might need 4 to 6 hours of labor instead of 2, doubling your labor bill. Ask the shop for a labor estimate before authorizing work, and ask specifically whether removing other parts is necessary.

Bumpers with sensors and electronics

Modern bumpers often contain parking sensors, backup cameras, radar for adaptive cruise control, or heated elements for snow and ice removal. These systems add $500 to $2,000 to the bumper cost and complicate the replacement.

If your new bumper is OEM and matches your vehicle's original configuration, the sensors usually transfer over or the shop can reprogram them to the new bumper. If you're using an aftermarket bumper without sensor mounts, the shop has to fabricate brackets or relocate the sensors to the bumper trim. Some sensors can't be moved without losing accuracy, which means you may need to replace them entirely — a backup camera alone can cost $300 to $800 installed.

Before you buy a replacement bumper, confirm with your shop whether it has the same sensor and camera mounts as your original. If not, ask for a quote to adapt or replace the electronics. This is one area where going OEM often saves money in the long run.

Insurance and whether it covers bumper replacement

Collision coverage pays for bumper damage from accidents, minus your deductible. Comprehensive coverage pays for bumper damage from theft, vandalism, weather, or hitting an animal. If you have a $500 deductible and the bumper repair costs $1,200, your insurance pays $700 and you pay $500.

If the repair cost is close to your deductible, it may not be worth filing a claim — your insurance company won't pay anything, and filing a claim can raise your rates. Some people choose to pay out of pocket for minor bumper damage for this reason. If the damage is severe and the repair exceeds your deductible by a significant amount, filing a claim usually makes sense.

Your insurer may steer you toward a specific repair shop or network of shops. You have the right to choose your own shop, but using an insurer-approved shop sometimes means faster approval and less paperwork. Get quotes from at least two shops and send them to your insurance company — they'll often approve the lower quote, and you can use the difference toward your deductible or out-of-pocket costs.

Getting a bumper repair quote

Call or visit three shops and describe the damage clearly: whether it's the cover only or the full assembly, whether there are bent or cracked parts underneath, and whether the bumper has sensors or cameras. A good shop will ask follow-up questions about the damage and may want to see photos or inspect the vehicle in person before quoting.

A written quote should list the parts (OEM or aftermarket, with part numbers), the labor hours and hourly rate, and any additional charges like painting, alignment, or sensor recalibration. It should also state whether the quote includes removing and disposing of the old bumper. Some shops charge $50 to $150 for disposal; others include it in the labor cost.

If you're using insurance, send the quotes to your adjuster and ask which one they'll approve. If you're paying out of pocket, the lowest quote isn't always the best — a shop that quotes significantly less than others may be cutting corners on paint quality, using low-grade aftermarket parts, or underestimating the labor time. Ask each shop how long they've been in business, whether they may provide their work, and what warranty they offer on parts and labor.

Frequently Asked Questions

Can I drive with a cracked bumper?

A cracked bumper cover is usually safe to drive with, though it may allow water or dirt inside. A bent or cracked reinforcement bar is a different concern — if it's damaged enough to affect the structural integrity of the vehicle, it should be repaired before driving long distances. If you're in an accident, a damaged reinforcement bar won't absorb impact as well as an intact one.

How long does a bumper replacement take?

A straightforward bumper cover replacement takes 1 to 3 hours. If the full assembly needs replacement or if the bumper has sensors that need recalibration, add 2 to 4 hours. Most shops can complete the work in one day, though some may need to order parts if they don't have your vehicle's bumper in stock.

Is it cheaper to repair a bumper than replace it?

Sometimes. A small dent or crack can be repaired with plastic welding or filler for $200 to $500. But if the damage is extensive, a new cover costs only slightly more and looks better. A bent reinforcement bar can be straightened for $150 to $400, but if it's cracked, replacement is the only option. Ask your shop whether repair or replacement makes sense for your specific damage.

What if I buy a used bumper instead of new?

Used bumpers from salvage yards or online marketplaces cost 40 to 60 percent less than new ones — sometimes $150 to $800 depending on the vehicle. The trade-off is that you don't know the history of the part, and it may have hidden damage, fading, or missing hardware. Some salvage yards offer a short warranty; others sell as-is. If you go this route, inspect the bumper in person if possible, and confirm that all mounting points and sensor mounts are intact.

Do I need to repaint a new bumper?

Most new bumpers come in black plastic or primer and need to be painted to match your vehicle. Painting costs $200 to $500 depending on your vehicle's color and the shop's rates. Some aftermarket bumpers come pre-painted to match common colors, which saves money but may not match your specific vehicle perfectly. Ask your shop whether the bumper comes painted and whether the color will match before you buy.