The bonnet release is inside the car, on the left side of the dashboard
To open the bonnet on a Mini, pull the lever located on the lower left side of the dashboard, just below the steering wheel. The lever is usually black or silver and sits horizontally. Pull it toward you with moderate force — it should click and release the bonnet catch.
After pulling the interior lever, walk to the front of the car. You'll see the bonnet has lifted slightly at the front edge. Reach under the bonnet near the center and feel for a secondary catch or safety latch. On most Minis, this is a small metal or plastic lever that you push or lift to fully release the bonnet so it swings open.
The exact location and style of the secondary catch varies slightly between Mini model years and generations. On some models it's a push-button; on others it's a small lever you lift upward. If you're unsure which direction to move it, try both — the catch will only move one way.
Key Takeaways
- The primary bonnet release lever is on the dashboard's lower left side, below the steering wheel, and requires a firm pull toward you.
- After pulling the interior lever, you must manually release a secondary catch under the bonnet's front edge before it will open fully.
- The secondary catch style differs between Mini generations, so check your owner's manual if the first attempt doesn't work.
- Never force the bonnet open if it resists — forcing can damage the catch mechanism or the bonnet itself.
What to do if the interior lever doesn't click
If you pull the dashboard lever and hear no click, the cable connecting the lever to the bonnet catch may have come loose or snapped. This is a common failure point on older Minis. Check that you're pulling the correct lever — some Minis have a fuel door release nearby that looks similar.
If you've confirmed it's the right lever and it moves freely without resistance or a click, the cable has likely failed. You'll need to open the bonnet from underneath the car. Lie on your back with your head under the front bumper and feel along the bonnet catch mechanism for a manual release point. Some catches have a small red or yellow tab you can pull by hand. If you cannot locate one, the bonnet will need to be opened by a mechanic or Mini dealer.
Accessing the engine bay once the bonnet is open
Once the bonnet is fully open, it will stay up on its own on most Minis — there is no prop rod to install. On older models, you may need to locate a small prop rod stored inside the engine bay or under the bonnet itself and insert it into a bracket to hold the bonnet open safely.
Before you lean into the engine bay, make sure the engine is cool if you've been driving. Many engine components, including the radiator, hoses, and metal surfaces, stay hot for several minutes after the car stops. Wait at least five minutes after driving before touching anything under the bonnet.
Closing the bonnet safely
To close the bonnet, first remove any prop rod if your model uses one and store it in its original location. Lower the bonnet gently by hand until it's about six inches from closed, then let it drop the rest of the way. Do not slam it — the catch will engage with a firm close, but slamming can damage the hinges or the catch mechanism.
If the bonnet doesn't latch fully on the first try, lift it again and check that nothing is blocking the catch. Debris, a loose hose, or a misaligned component can prevent the bonnet from closing properly. Once it's closed, give it a gentle upward tug to confirm it's latched securely.
Mini model differences in bonnet release
The original Mini (1959–2000) and the modern Mini Cooper (2001–present) have different bonnet mechanisms. On the classic Mini, the bonnet release is often a small lever on the dashboard or sometimes a pull handle. On modern Minis, the lever is more standardized and easier to locate.
If you own a Mini Clubman, Mini Countryman, or Mini Paceman, the bonnet release location is the same — lower left dashboard — but the secondary catch under the bonnet may be styled differently. Check your owner's manual for your specific model year if the standard method doesn't work. The manual will include a diagram showing exactly where the catch is located and how to operate it.
When to call a mechanic instead
If the interior lever pulls but nothing happens, or if the secondary catch is stuck and won't move even with gentle pressure, stop and don't force it. Forcing a stuck catch can break the mechanism, making the repair more expensive. A mechanic can open the bonnet safely and diagnose whether the cable has failed, the catch is jammed, or a different component is the problem.
If you need to access the engine bay urgently — for example, to check fluid levels or add coolant — and the bonnet won't open, a Mini dealer or independent mechanic can open it in minutes. The cost is usually minimal if no parts need replacement.
Frequently Asked Questions
Why does my Mini bonnet have two release points?
The two-stage release is a safety feature. The interior lever disengages the main catch, and the secondary catch under the bonnet prevents accidental opening while driving. This design keeps the bonnet from flying up if the main catch fails on the road.
Can I open the bonnet from outside the car?
No, there is no external release on any Mini model. You must be inside the car to pull the dashboard lever first. This is standard on modern cars for security and safety reasons.
Is the bonnet release the same on all Mini Coopers?
The location is the same on all modern Mini Coopers (2001 and later), but the secondary catch style may vary slightly between generations. Consult your owner's manual for your specific year if you're unsure how to operate the catch under the bonnet.
What should I do if the bonnet won't stay open?
If your Mini has a prop rod, make sure it's fully inserted into its bracket. If it doesn't have one and the bonnet keeps falling, the hinges may be worn or the catch may not be engaging properly. Have a mechanic inspect the hinge and catch mechanism.
Can I replace the bonnet release cable myself?
Replacing the cable is possible for someone with basic mechanical skills, but it requires removing the dashboard trim panel and routing the new cable through the firewall. Most owners find it easier to have a mechanic do this work, as the job takes one to two hours and requires some disassembly.