Honda track snowblowers use a rubber or metal belt system instead of wheels to move across snow
A Honda track snowblower is a snow removal machine that replaces the standard wheels found on most snowblowers with a continuous rubber or metal track — similar to a small tank or bulldozer. The track wraps around the machine's frame and moves in a loop, which spreads the machine's weight across a wider surface area. This design lets the snowblower grip packed snow, ice, and rough terrain far better than wheeled models can, and it prevents the machine from sinking into deep or wet snow.
Honda makes track snowblowers in both single-stage and two-stage configurations. A single-stage track model is compact and lighter, designed for driveways and small properties. A two-stage track model is larger, with a separate auger that breaks up snow and a discharge chute that throws it to the side — these handle deeper snow and wider areas. The track system is the main difference; the engine, fuel type, and snow-throwing capacity work the same way as on wheeled models.
Key Takeaways
- Track snowblowers grip snow and ice better than wheels because the track spreads weight across a wider surface and digs in rather than sliding.
- Honda makes both single-stage compact models and two-stage models with separate augers, so the track system works with different snow-handling sizes.
- Track models cost more upfront than wheeled versions but last longer on steep slopes, icy driveways, and properties with rough ground.
- Tracks require seasonal maintenance — cleaning, tension checks, and storage — but are less likely to need replacement than wheels if the machine is used correctly.
When a track system outperforms wheels
Wheels slip on ice and packed snow because they have a small contact patch — only the tire edge touches the ground. A track spreads contact across its entire length, so it grips instead of sliding. This matters most on slopes steeper than about 15 degrees, on driveways that are already iced over, or on properties where the ground is uneven or rocky.
Wheels also sink into very wet or heavy snow because all the machine's weight concentrates on a small footprint. A track distributes that weight, so the snowblower stays on top of the snow instead of plowing through it. If your property has deep snow, a track model will move faster and use less fuel because it is not fighting to climb out of a rut it created.
On flat, clear pavement or well-maintained gravel, wheels and tracks perform similarly. If your driveway is short, level, and you clear it often, a wheeled model will cost less and weigh less to store. But if you have hills, ice, or rough ground, the track system pays for itself in reliability and speed.
Single-stage versus two-stage track models
Honda's single-stage track snowblowers are compact machines, usually 18 to 24 inches wide, with an engine that powers both movement and a single auger that scoops and throws snow. They weigh between 150 and 250 pounds. These models work well for driveways up to about 50 feet long and snow depths under 8 inches. They are easier to maneuver, take up less storage space, and cost less than two-stage models.
Two-stage track models are wider (24 to 30 inches or more) and heavier (300 to 600 pounds). They have a separate auger that breaks up snow and a discharge chute powered by a second system that throws snow 20 to 40 feet away. Two-stage models handle snow 12 inches deep or deeper and can clear larger properties in one pass. They are harder to turn and store, but they work faster on heavy snow and do not clog as easily.
The track system works the same way in both: it moves the machine forward and backward and helps it grip slopes. The difference is in how much snow the machine can handle per pass and how far it throws the snow.
Maintenance and seasonal care for tracks
Tracks need cleaning after each use. Snow and ice pack between the track and the frame, and if left to freeze, they can crack the track or bend the frame. After each session, brush out packed snow with a stiff brush or scraper, and hose down the track if you have access to water. Let it dry before storing.
Check track tension before the season starts and again halfway through if you use the machine often. A track that is too loose will slip and wear faster; one that is too tight will strain the engine and wear the track prematurely. Honda publishes tension specs for each model in the owner's manual — usually measured by how much the track deflects when you push on it by hand. Adjustment bolts on the frame let you tighten or loosen the track.
At the end of the season, drain the fuel tank or run the machine until it is empty, clean the track thoroughly, and store it in a dry place. If you store it outside, cover it. Tracks can crack in extreme cold if they are wet, and rubber degrades faster in direct sunlight. Most Honda track snowblowers last 10 to 15 years with this care; wheels on a wheeled model often need replacement after 5 to 8 years of regular use.
Cost comparison: tracks versus wheels
A Honda single-stage wheeled snowblower typically costs between $400 and $700. A single-stage track model from Honda costs between $600 and $1,000. A two-stage wheeled model runs $1,200 to $2,000, while a two-stage track model runs $1,800 to $3,000. The track system adds 30 to 50 percent to the price.
That upfront cost difference shrinks over time if you use the machine on slopes or rough ground. Wheels wear out faster in those conditions and cost $100 to $300 to replace per pair. Tracks last longer but cost $400 to $800 to replace when they finally wear out — which may not happen for 10 years or more if you maintain them. On flat, smooth pavement, the wheeled model will outlast the track in terms of cost per year of use.
Fuel consumption is similar between tracks and wheels on flat ground, but tracks use less fuel on slopes and in deep snow because they do not sink or slip. If you clear snow weekly in a climate with heavy snowfall, a track model may save enough on fuel and time to offset the higher purchase price over five to seven years.
Storage and space requirements
Single-stage track models are compact enough to fit in a garage corner or a garden shed, though they are slightly bulkier than wheeled versions of the same width. Two-stage track models need a dedicated space — a garage bay, a shed, or a covered outdoor area — because they are wider and heavier. If you have limited storage, measure the machine's dimensions before you buy.
Tracks can freeze to the ground if stored in a damp place over winter. Store the machine on a concrete floor or wooden pallet, not directly on soil or grass. If you store it outside, use a weatherproof cover and elevate it slightly so air can circulate underneath. This prevents moisture from pooling and cracking the track.
Common problems and how to avoid them
The most common track problem is clogging — wet, heavy snow packs between the track and frame and stops the machine from moving. This happens more often in single-stage models because they do not have a separate chute to throw snow away from the machine. To prevent it, clear packed snow from the track every 10 to 15 minutes if the snow is wet, and use a two-stage model if you live in a climate with frequent wet snow.
Tracks can also slip if the tension is wrong or if the track is worn unevenly. Uneven wear usually means the track was too loose or the machine was turned too sharply on pavement. Always turn the machine gently, and avoid using it on bare pavement — the track will wear much faster. If the track slips even after you tighten it, the track itself may be worn and need replacement.
Engine problems are the same on track and wheeled models: stale fuel, a clogged spark plug, or a dirty air filter. These are not track-specific issues, but they are worth checking before you assume the track is the problem.
Frequently Asked Questions
Can I use a track snowblower on pavement?
Yes, but the track will wear faster on bare concrete or asphalt than on snow or grass. Limit pavement use to short distances, and avoid sharp turns on hard surfaces. If you have a long paved driveway, a wheeled model may be more practical and cheaper to maintain.
How deep can a Honda track snowblower handle?
Single-stage models work best up to 8 inches; two-stage models handle 12 inches or deeper. The actual depth depends on how wet the snow is — wet, heavy snow clogs more easily than dry, light snow. Check your machine's manual for the maximum recommended depth.
Do I need to drain the fuel before storing a track snowblower?
Yes. Fuel left in the tank over the off-season turns to varnish and can clog the carburetor. Either drain the tank completely or run the engine until it is empty. Some owners add fuel stabilizer instead, but draining is more reliable.
What is the difference between rubber and metal tracks?
Most Honda track snowblowers use rubber tracks because they are quieter, grip snow better, and are easier to turn. Metal tracks are heavier and noisier but last longer and grip ice better. Honda's consumer models use rubber; metal tracks are more common on commercial or professional machines.
Can I replace wheels with a track system on my existing snowblower?
No. The frame, axles, and drive system are designed differently for tracks versus wheels. You cannot retrofit a track onto a wheeled machine. If you want a track system, you need to buy a track model from the start.