A high reach forklift is a specialized lifting machine with an extended mast that can raise loads much higher than a standard forklift, often 30 feet or more into the air.

You will encounter high reach forklifts in warehouses, manufacturing plants, and automotive service facilities where technicians need to access overhead storage, lift vehicles onto elevated work platforms, or retrieve parts from tall shelving. Unlike a standard forklift that lifts loads to 10 or 15 feet, a high reach forklift's extended mast and boom system allow it to place items at heights that would otherwise require a ladder, crane, or separate lifting equipment.

In the context of vehicle maintenance, high reach forklifts are most relevant when your shop needs to store vehicles vertically, access components mounted high on a vehicle frame, or move heavy parts to upper-level storage. Understanding how they work and their safety requirements matters if you own a facility that uses them or if you are having work done at a shop that does.

Key Takeaways

  • High reach forklifts extend 30 feet or higher and are used to store vehicles vertically or access overhead components in maintenance facilities.
  • The extended mast makes these machines less stable than standard forklifts, so they require more space, slower operation, and trained operators.
  • Load capacity decreases significantly as the mast extends higher, meaning a high reach forklift cannot lift its maximum weight at maximum height.
  • Facilities using high reach forklifts must follow OSHA regulations for operator training, load limits, and regular equipment inspection.
  • High reach forklifts are expensive to purchase and maintain, so most automotive shops rent them or use them only for specific tasks.

How the Mast and Boom System Works

A high reach forklift differs from a standard forklift in its mast design. A standard forklift has a single or double mast that extends vertically. A high reach forklift adds a boom — an articulated arm that extends horizontally and can reach out and up simultaneously. This combination allows the machine to lift a load, extend the boom forward, and then raise the mast to place the load on a high shelf or storage rack.

The operator controls the boom and mast from a cab or control station, using hydraulic cylinders to extend, retract, tilt, and raise the load. Because the boom extends outward before lifting, the machine needs more floor space than a standard forklift. The center of gravity also shifts as the boom extends, which is why high reach forklifts are slower and require more careful operation.

The load capacity decreases as the mast rises and the boom extends. A high reach forklift might safely lift 5,000 pounds at ground level but only 1,500 pounds at 30 feet. This is called the load chart, and operators must consult it before every lift to confirm the machine can handle the weight at that height and distance.

Why Stability and Load Limits Matter

The taller the mast extends, the higher the center of gravity of the load becomes. A load suspended 30 feet in the air exerts enormous force on the forklift's frame and tires. If the load is too heavy, off-center, or if the machine is on uneven ground, the forklift can tip. A tipped high reach forklift can drop its load from a dangerous height, injure or kill an operator, and damage the vehicle or equipment below.

This is why load charts are not suggestions — they are the result of engineering calculations that account for the machine's weight distribution, tire grip, and structural limits. Exceeding the load limit at any height voids the machine's safety rating and creates when ready danger. Operators must also may support the load is centered on the forks and secured with straps or cages if it might shift.

Ground conditions matter too. A high reach forklift on wet concrete, gravel, or a slope is more likely to slip or tip. Facilities that use these machines regularly maintain level, dry work areas and inspect the ground before each shift.

Operator Training and OSHA Requirements

The U.S. Occupational Safety and Health Administration (OSHA) requires that anyone operating a forklift — including a high reach forklift — hold a valid forklift operator certification. This is not a government license but a facility-specific credential issued by the employer or a training provider after the operator completes classroom instruction and a practical test.

Training covers load capacity, mast operation, stability, ground conditions, pedestrian safety, and how to read and follow the load chart. For high reach forklifts specifically, training includes the additional risks of working at height, the reduced load capacity at elevation, and the importance of slower operation. The certification is valid for three years, after which the operator must retrain.

OSHA also requires facilities to inspect forklifts before each shift. The operator or a designated technician checks the brakes, tires, hydraulic hoses, mast alignment, and load-holding mechanisms. Any defect must be reported, and the machine must be taken out of service until it is repaired. These inspections prevent equipment failure that could cause a load to drop or the machine to lose control.

Cost and Maintenance Considerations

A new high reach forklift costs between $80,000 and $150,000 or more, depending on the lift height and load capacity. Because of this cost, most automotive shops and smaller facilities do not own one. Instead, they rent from equipment rental companies when they need to move a vehicle to vertical storage or access a high component.

Rental rates vary by location and duration but typically range from several hundred dollars per day to several thousand per month. The rental company usually delivers the machine, provides an operator or ensures the facility's operator is trained, and handles routine maintenance. This arrangement is more cost-effective than ownership for shops that use a high reach forklift only occasionally.

If a facility owns a high reach forklift, maintenance costs are significant. Hydraulic fluid must be changed regularly, hoses and cylinders must be inspected for leaks, and the mast must be aligned and lubricated. Tire wear is accelerated by the weight and the frequent turning required in tight spaces. A major repair — such as replacing a hydraulic pump or mast section — can cost thousands of dollars and take the machine out of service for days or weeks.

Safety Hazards Specific to High Reach Forklifts

The primary hazard is a dropped load. If the mast fails, the load-holding mechanism breaks, or the operator loses control, a load suspended 30 feet above the ground will fall. Anyone below is at risk of serious injury or death. This is why facilities using high reach forklifts must keep the area below the load clear of personnel and establish exclusion zones that only authorized workers can enter.

Tip-over is another major risk. A high reach forklift is inherently less stable than a standard forklift because its center of gravity is higher and farther from the base. Uneven ground, excessive speed, sharp turns, or a load that is too heavy or off-center can cause the machine to tip. An operator who feels the machine becoming unstable should when ready lower the load and move to level ground.

Visibility is reduced when the mast is fully extended. The operator cannot see directly above or to the sides of the load. Mirrors, cameras, and spotters (a second person who watches the load and warns the operator of obstacles) are essential safety tools. Many facilities require a spotter for any lift above a certain height, even if the operator has a camera system.

When a Shop Uses a High Reach Forklift

If you are having work done at a facility that uses a high reach forklift, you may see your vehicle lifted onto a storage rack or moved to an elevated work platform. This is normal and safe if the facility follows OSHA rules and the operators are trained. You can ask the shop whether their operators are certified and whether the machine is inspected regularly. A professional shop will be happy to confirm these details.

If you own a facility that uses high reach forklifts, may support that all operators hold current certifications, that the machines are inspected before each shift, and that load charts are posted and followed. Train all staff on the hazards of working near high reach forklifts, including the risk of dropped loads and tip-overs. Establish clear exclusion zones and require spotters for high-risk lifts. These practices protect your workers and your liability.

Frequently Asked Questions

What is the difference between a high reach forklift and a telehandler?

A telehandler (or telehandler boom lift) is similar to a high reach forklift but is designed primarily for construction and outdoor work. It has a longer boom, can reach higher, and is often used to place materials on roofs or scaffolding. A high reach forklift is designed for indoor warehouse and facility use, with a shorter boom and higher load capacity at lower heights. Both require trained operators and follow similar safety rules.

Can a high reach forklift lift a car?

Yes, if the car's weight is within the load chart at the desired height. A typical car weighs 3,000 to 4,000 pounds. A high reach forklift can lift this weight at moderate heights, but as the mast extends higher, the load capacity decreases. The operator must check the load chart and may support the car is properly secured with straps or a lifting frame before raising it.

How often does a high reach forklift need to be inspected?

OSHA requires an inspection before each shift or daily use. A more thorough inspection by a certified technician should be done monthly or quarterly, depending on how often the machine is used. Any defect found during a shift inspection must be reported when ready, and the machine must not be used until it is repaired.

What happens if a load falls from a high reach forklift?

A dropped load can cause serious injury or death to anyone below, damage to the facility or equipment, and legal liability for the facility owner. OSHA investigates dropped-load incidents, and facilities that fail to follow safety rules can face fines and citations. This is why load limits, operator training, and exclusion zones are non-negotiable.

Is renting a high reach forklift cheaper than buying one?

For most automotive shops, yes. Renting costs a few hundred to a few thousand dollars per month, depending on duration and location. Buying costs $80,000 to $150,000 upfront, plus maintenance, storage, insurance, and operator training. Unless a facility uses a high reach forklift daily, renting is more economical and avoids the burden of maintenance and repairs.