Hawaiian Airlines grounded its A321neo aircraft in 2024 due to engine cracks found during inspection
In early 2024, Hawaiian Airlines discovered structural cracks in the engines of its Airbus A321neo fleet and temporarily removed those aircraft from service. The airline found the cracks during routine inspections on Pratt & Whitney PW1100G-JM engines, which power the A321neo. This was not a sudden failure mid-flight—it was a preventive discovery during scheduled maintenance, which is exactly how the system is supposed to work.
The cracks appeared in the high-pressure compressor stage of the engine, a part that spins at extremely high speed and temperature. Pratt & Whitney, the engine manufacturer, issued a service bulletin requiring inspections of affected engines and replacement of cracked components. Hawaiian Airlines complied by grounding the aircraft until repairs could be completed, prioritizing safety over schedule.
This incident illustrates a principle that applies to every vehicle, from a car to a commercial jet: preventive maintenance catches problems before they become catastrophic. The airline did not wait for an engine failure. It inspected, found damage, and fixed it.
Key Takeaways
- Cracks were found in Pratt & Whitney PW1100G-JM engines during routine inspections, not discovered after a failure or emergency.
- The high-pressure compressor stage, which operates under extreme heat and stress, is a component designed to be inspected regularly for exactly this reason.
- Pratt & Whitney issued a service bulletin requiring inspections and component replacement, and Hawaiian Airlines followed that directive when ready.
- Temporary groundings during maintenance prevent accidents and are a normal part of aircraft operations, just as a car owner might take a vehicle off the road for repairs.
How aircraft engines are inspected for hidden damage
Commercial aircraft engines undergo inspections at scheduled intervals—typically every few hundred flight hours or after a set number of flight cycles (takeoff and landing pairs). These inspections are far more detailed than what most car owners experience. Technicians use borescopes (small cameras on flexible tubes) to look inside the engine without taking it completely apart, and they use ultrasound and other non-destructive testing methods to find cracks too small to see with the naked eye.
The Pratt & Whitney PW1100G-JM is a newer engine design, introduced around 2015, and like any new design it goes through a learning period. Early production runs sometimes reveal issues that engineering models did not predict. When those issues appear, the manufacturer issues a service bulletin—a directive that tells all airlines operating that engine what to inspect, how often, and what to replace if damage is found.
Hawaiian Airlines' discovery of cracks during inspection meant the system worked. The airline caught the problem during a scheduled maintenance event, not during flight. That is the entire purpose of preventive maintenance schedules.
Why engine cracks matter in aircraft but develop slowly
An engine crack does not mean the engine will fail when ready. Cracks in metal grow over time as the component cycles through stress—heating up, cooling down, spinning, stopping. Each cycle makes the crack slightly larger. Eventually, if left unchecked, a crack can grow large enough that the component fails. In an aircraft engine, that failure could mean loss of thrust, damage to other engine parts, or in a worst-case scenario, an uncontained engine failure where debris exits the engine casing.
This is why aircraft maintenance is so strict. Engineers calculate how many flight hours or cycles a cracked component can safely endure before replacement is necessary. The service bulletin from Pratt & Whitney told Hawaiian Airlines the inspection interval and the action to take if cracks were found. The airline followed that guidance.
The same principle applies to your car's engine. A small crack in the engine block might not cause when ready failure, but it will worsen over time. That is why regular inspections—oil analysis, visual checks during service—are designed to catch problems before they become dangerous.
What a service bulletin is and why airlines must follow it
A service bulletin is a technical directive issued by the aircraft or engine manufacturer. It tells operators (airlines) what to inspect, when to inspect it, what to look for, and what action to take if a problem is found. Service bulletins are not optional suggestions—they are binding requirements. The Federal Aviation Administration (FAA) monitors compliance, and airlines that ignore service bulletins face fines and potential loss of operating certificates.
When Pratt & Whitney issued the service bulletin for PW1100G-JM compressor inspections, every airline operating that engine had to comply. Hawaiian Airlines inspected its fleet, found cracks on some engines, and removed those aircraft from service until the engines could be repaired or replaced. This is standard procedure.
For car owners, the equivalent is a manufacturer recall or a technical service bulletin from your car's maker. If your vehicle is subject to a recall, the manufacturer is telling you there is a known issue that needs to be fixed. Ignoring it puts you at risk and may void your warranty or insurance coverage in an accident.
The difference between a grounding and a failure
A grounding—taking aircraft out of service temporarily—is a sign that the maintenance system is working, not a sign of crisis. Hawaiian Airlines grounded its A321neo fleet to inspect and repair engines. That is not the same as a fleet-wide failure or a safety scandal. It is preventive action.
The alternative would be to keep flying the aircraft, hope the cracks do not grow, and risk an in-flight engine failure. No airline chooses that path. The cost of a temporary grounding—lost revenue, rescheduled flights, customer inconvenience—is far lower than the cost of an accident, the regulatory fallout, and the loss of public trust.
When your mechanic tells you that your car needs a repair before you drive it further, that is also a grounding of sorts. The mechanic is saying: this component is not safe to operate as-is. Fix it before you drive. That inconvenience prevents a breakdown on the highway or a collision caused by brake failure.
How manufacturers learn from early production issues
The PW1100G-JM engine cracks were not a design flaw that went unnoticed for years. They were discovered during the normal inspection cycle, reported to the manufacturer, and addressed through a service bulletin within a reasonable timeframe. This is how modern engineering works: you build something new, you operate it, you inspect it, you find issues, you fix them, and you update your design for the next production run.
Pratt & Whitney has since made design changes to the compressor stage to reduce the likelihood of cracks in future engines. Airlines operating older engines follow the inspection and replacement schedule. New aircraft delivered with updated engines have the improved design built in from the start.
Your car manufacturer does the same thing. Early production years of a new model sometimes have issues that later years do not. That is why used car buyers often avoid the first year of a redesign—not because the car is unsafe, but because the manufacturer is still learning. By year three or four, most of those early issues have been found and fixed.
What this means for aircraft safety and passenger trust
The Hawaiian Airlines A321neo situation demonstrates that commercial aviation's safety system works. An issue was found during inspection. The airline acted when ready. Passengers were not put at risk. The aircraft were returned to service only after repairs were completed and verified.
This is not a story about a dangerous airline or a defective aircraft type. It is a story about maintenance catching a problem before it became dangerous. That is exactly what you want to hear.
For passengers, the takeaway is straightforward: commercial aviation is heavily regulated, frequently inspected, and grounded when ready when issues are found. Your car is inspected far less often and far less rigorously. If you want to feel safe, trust the system that grounds aircraft for cracks found during inspection.
Frequently Asked Questions
Does this mean the A321neo is unsafe?
No. The aircraft type is safe. The issue was found during routine inspection, not during flight. The airline fixed the problem and returned the aircraft to service. Aircraft are grounded for maintenance all the time—this was just a more visible example because it affected multiple aircraft at once.
Could this happen to my car's engine?
Yes, engine cracks can develop in cars too, though they are less common because car engines operate at lower temperatures and stresses than jet engines. Regular oil changes and inspections help catch engine problems early. If your mechanic finds a crack during service, follow their recommendation to repair it before driving further.
Why did it take an inspection to find the cracks?
Cracks in the compressor stage are internal—you cannot see them from outside the engine. That is why borescopes and ultrasound testing exist. Aircraft maintenance includes these detailed inspections specifically to find hidden damage before it causes failure.
How long does it take to repair a cracked engine?
It depends on the damage and the repair needed. Some cracks can be repaired by replacing the damaged compressor stage, which might take days to weeks. Others require full engine replacement, which takes longer. Hawaiian Airlines' grounding lasted several weeks as repairs were completed across the fleet.
Will this happen again?
Pratt & Whitney has made design improvements to reduce the risk of future cracks. Airlines continue to inspect engines on the schedule set by the manufacturer. No mechanical system is perfect, but the inspection and maintenance system catches problems before they become dangerous.