Accessible vans are sold through the same dealers as standard vehicles, but you'll need to know which models come with lifts or ramps and where to find conversion specialists

Wheelchair-accessible vans fall into two categories: factory-equipped models from manufacturers like Chrysler and Toyota, and aftermarket conversions done by specialty shops. Factory vans are faster to find and often cheaper upfront, but conversions give you more control over which base vehicle you start with. Both routes require you to shop differently than you would for a regular car — most dealerships don't stock accessible inventory, and prices vary widely based on the type and quality of the equipment.

The most common accessible vans are built on the Chrysler Pacifica platform, which Chrysler sells through its dealer network with either a side-entry lift or a rear ramp. Toyota offers the Sienna with aftermarket conversion options. If you want something different — a full-size van, a truck conversion, or a specific layout — you'll work with an independent conversion company that modifies a base vehicle to your needs.

Key Takeaways

  • Chrysler Pacifica accessible models are the most widely available factory option and can be ordered through Chrysler dealers, though you may need to special-order rather than buy from lot stock.
  • Aftermarket conversions cost more but let you choose your base vehicle and customize the lift type, ramp angle, and interior layout to match your specific mobility equipment.
  • Conversion companies typically take 8 to 16 weeks to complete a van, so budget for that timeline if you're not buying a pre-converted inventory vehicle.
  • Financing accessible vans works the same as standard vehicles through dealer loans or your own bank, though some lenders require the conversion to be completed before funding.
  • Used accessible vans are available but less common; inspect the lift or ramp mechanism carefully and ask for service records on the accessibility equipment.

Factory-Built Accessible Vans from Chrysler and Toyota

Chrysler manufactures the Pacifica Hybrid and Pacifica Plug-in Hybrid with factory-installed side-entry lifts and rear ramps through its dealer network. These are built on the assembly line with the accessibility equipment integrated, not added afterward. You order them through a Chrysler dealer, though not every dealer stocks them — you may need to special-order or have one transferred from another location. Pricing for a factory Pacifica with lift or ramp runs several thousand dollars above the base model, and that cost is built into the vehicle's MSRP.

Toyota offers the Sienna minivan, which is not factory-equipped with lifts or ramps but can be converted by authorized Toyota dealers or independent shops. The Sienna is easier to find on dealer lots than a factory Pacifica, but you'll need to budget for the conversion separately and wait for it to be completed.

Factory options are faster to acquire if you find one in stock, and the equipment comes with the vehicle's warranty. The trade-off is less customization — you get the lift or ramp type Chrysler chose, not necessarily the one that works best for your specific wheelchair or scooter.

Aftermarket Conversions and Specialty Van Builders

Conversion companies take a base van — usually a Chrysler Pacifica, Honda Odyssey, Toyota Sienna, or full-size Ford Transit — and install a lift, ramp, or both, along with any interior modifications you need. Major conversion shops include BraunAbility, VMI (Vans for Independent Mobility), and Mobility Ventures, though regional shops exist in most states. These companies work with you to choose the lift type (hydraulic side-entry, automatic ramp, manual ramp), the interior layout, and any grab bars or seating modifications.

The conversion process typically takes 8 to 16 weeks from order to delivery. You can buy the base vehicle yourself and have the shop convert it, or some shops will source the vehicle for you. Conversion costs range widely depending on the equipment — a basic ramp conversion may cost $15,000 to $25,000, while a full side-entry lift with custom interior work can reach $40,000 or more. These costs are separate from the vehicle price.

The advantage of conversion is control: you choose the base vehicle, the lift mechanism, the interior layout, and which features matter most. The disadvantage is time and the fact that the conversion is not covered by the vehicle's factory warranty — the conversion company warrants their work separately.

Buying New vs. Used Accessible Vans

New accessible vans give you a full warranty on both the vehicle and the accessibility equipment, and you know the lift or ramp has never been used. The downside is cost and wait time — factory Pacificas must be ordered, and conversions take weeks or months.

Used accessible vans are cheaper but harder to find. Inventory is limited because fewer people sell them, and you need to inspect the lift or ramp carefully. Ask the seller for service records on the accessibility equipment, test the lift or ramp yourself if possible, and have a mechanic inspect the vehicle's overall condition. A used lift that hasn't been serviced regularly may fail soon after you buy it, and repair costs can be high.

If you buy a used van with a conversion, ask whether the conversion company is still in business and whether they can service the equipment. Some shops close or move, leaving owners without support.

Financing and Pricing Considerations

Financing an accessible van works the same as financing any vehicle: you can get a loan from a bank, credit union, or the dealer. The vehicle price plus the conversion cost (if applicable) becomes the loan amount. Some lenders require proof that the conversion is complete before they fund the loan, so clarify this with your lender before you order.

Prices vary significantly. A factory Chrysler Pacifica with lift runs roughly $50,000 to $65,000 depending on trim and options. A base vehicle plus aftermarket conversion can range from $35,000 to $70,000 or more. Used accessible vans typically cost 30% to 50% less than new, but selection is limited.

Some states and the federal government offer tax credits or deductions for vehicle modifications related to disability, though these vary by state and income level. Check with your state's vocational rehabilitation office or a tax professional to see whether you may have access to.

Where to Shop for Accessible Vans

For factory Chrysler Pacificas, contact your local Chrysler dealer and ask about accessible models. If they don't have one in stock, they can special-order it, though this typically adds 4 to 8 weeks to delivery. You can also call Chrysler's customer service line to find dealers in your area that specialize in accessible vehicles.

For conversions, search for conversion companies in your state or region. BraunAbility and VMI have dealer networks across the country and can tell you which shops near you are authorized. You can also contact your state's vocational rehabilitation office — many have relationships with local conversion shops and may be able to point you toward reputable providers.

Used accessible vans are sold through specialty dealers, online marketplaces like Craigslist and Facebook Marketplace, and occasionally through general used-car dealers. Disability organizations and local independent living centers sometimes maintain lists of used vans for sale or can connect you with sellers.

Inspecting the Lift or Ramp Before You Buy

If you're buying a used van or a pre-converted vehicle, test the lift or ramp yourself. Operate it several times to check for smooth movement, unusual sounds, or hesitation. Ask the seller how often it's been serviced and whether they have records. A lift that's been used daily for five years may need maintenance soon, even if it works now.

Check the weight capacity of the lift or ramp against your wheelchair or scooter's weight. Lifts are typically rated for 300 to 600 pounds, and if your equipment is heavier, you need a lift rated for that weight. Ask the seller or conversion company for the equipment's specifications.

Inspect the van's floor and frame around the lift or ramp for rust, corrosion, or damage. Water can get into the mechanism and cause problems, especially if the van has been used in wet climates or near salt water. If you see rust or corrosion, have a mechanic inspect the structural integrity before you buy.

Frequently Asked Questions

Can I get a wheelchair-accessible van if I'm leasing instead of buying?

Some lease programs allow modifications for disability, but it depends on the leasing company and the type of modification. Contact the leasing company directly to ask about their policy on accessibility equipment. Many require that modifications be reversible or that you pay for restoration when you return the vehicle.

How long does a lift or ramp last before it needs to be replaced?

A well-maintained lift or ramp typically lasts 10 to 15 years, though heavy daily use can shorten that. Regular servicing — usually annual or every 50 to 100 uses — extends the lifespan. Ask the conversion company what maintenance schedule they recommend and budget for occasional repairs.

What's the difference between a side-entry lift and a rear ramp?

A side-entry lift raises your wheelchair vertically and swings it into the van through a side door, taking up less interior space. A rear ramp lowers from the back of the van and lets you roll in horizontally, which is simpler mechanically but takes more floor space. Side-entry lifts are faster but more complex; ramps are slower but more reliable. Your choice depends on your van's layout and your preference.

Do I need a special driver's license to operate a van with hand controls?

No, but you do need to be trained on how to use them safely. The conversion company or a driving rehabilitation specialist can teach you. Some states require a notation on your license if you use adaptive equipment, so check your state's DMV rules.

Can I buy a van and have it converted later, or do I need to order the conversion upfront?

You can do either. Some people buy a used van and have it converted afterward, while others order the conversion at the same time they buy the vehicle. If you buy first, make sure the conversion shop can work on your specific van model and that the timeline works for you.