What makes a camper accessible, and where to find them

An accessible camper has a wheelchair ramp or lift, wider doorways and hallways, a roll-in or transfer-accessible shower, and cabinets and appliances positioned for seated reach. Some models come factory-built with these features; others are retrofitted by dealers or custom builders after purchase. You will find accessible campers through RV dealerships that specialize in adaptive equipment, general RV dealers who stock a few accessible models, and custom conversion shops that modify standard campers to your specifications.

The three main sources differ in cost, timeline, and customization. Factory-built accessible models from manufacturers like Bradd & Hall, Entervan, and Mobility Ventures are ready to use but limited to their standard layouts. Dealership retrofits take four to twelve weeks and cost less than full custom builds but offer fewer options. Custom builders give you the most control over layout and features but charge the most and take the longest—sometimes six months or more.

Prices vary widely based on the base camper size, the type of accessibility features, and whether you buy factory-built or retrofit. A used accessible travel trailer might cost $30,000 to $60,000; a new Class C motorhome with accessibility features often runs $80,000 to $150,000; a fully custom build can exceed $200,000. Your budget will narrow which route makes sense.

Key Takeaways

  • Accessible campers come factory-built, retrofitted by dealers, or custom-built by conversion shops, each with different costs and timelines.
  • Essential features include a ramp or lift, wider doorways, accessible bathroom and kitchen, and storage within seated reach.
  • Prices range from $30,000 for used accessible travel trailers to $200,000 or more for fully custom builds.
  • Test the ramp, doorways, and bathroom transfers in person before buying, because dimensions that look adequate on paper may not work for your specific mobility device or transfer method.
  • Financing options include RV loans, personal loans, and sometimes grants from disability organizations, depending on your situation and location.

Factory-built accessible campers: what's available now

Bradd & Hall manufactures Class B and Class C motorhomes with wheelchair lifts, spacious bathrooms, and lowered cabinets. Their models range from about 24 feet to 32 feet and are sold through authorized dealers across the country. Entervan builds compact, fully accessible Class B vans with European engineering and sells primarily through their own network. Mobility Ventures offers Class A motorhomes with wheelchair ramps and accessible layouts, marketed mainly to the rental market but also sold for private use.

These factory models arrive ready to use, which saves time and often costs less than retrofit. The trade-off is that you choose from existing floor plans rather than designing your own. If the standard bathroom size, kitchen layout, or sleeping arrangement does not match your needs, you will need to retrofit afterward or look at custom builders instead.

Availability varies by region and season. Spring and early summer see the most inventory; winter often means longer waits or limited selection. Contact dealers directly to ask what accessible models they have in stock or can order, and ask about their return or trial policies—some allow a short rental period before purchase.

Retrofitting a standard camper: timeline and cost

Retrofitting means buying a standard camper and having a shop add accessibility features. This route costs less than factory-built models with the same features and gives you more choice in the base camper. A dealer retrofit typically takes four to twelve weeks, depending on the complexity and the shop's current workload. Custom conversion shops that specialize in accessibility can take longer but often produce higher-quality work.

Common retrofit additions include external wheelchair lifts (the most common choice, costing $8,000 to $15,000), ramp systems ($3,000 to $8,000), widened doorways ($2,000 to $5,000), accessible bathroom modifications ($5,000 to $12,000), and lowered cabinetry and appliances ($2,000 to $6,000). A full retrofit of a standard travel trailer or Class C motorhome typically runs $25,000 to $50,000 total, depending on what you start with and what you add.

The advantage of retrofitting is that you can buy a used camper in good condition at a lower price, then invest in exactly the features you need. The disadvantage is that you are responsible for finding a may have access to shop, managing the work, and dealing with any problems that arise during conversion. Ask for references from previous customers and request a detailed written estimate before work begins.

Custom builds: full control and higher cost

A custom build starts with a bare chassis or a stripped-down camper shell and is designed and built to your exact specifications. Shops like Adaptive Vans, Bradd & Hall's custom division, and regional conversion specialists handle these projects. You work with a designer or engineer to plan the layout, choose materials, and specify every feature. The result is a camper tailored to your mobility device, transfer method, and daily needs.

Custom builds take the longest—typically four to eight months from contract to delivery—and cost the most, often $150,000 to $300,000 or more depending on the base vehicle and the complexity of the build. However, if standard models do not fit your needs or if you have specific medical equipment or mobility requirements, a custom build may be the only practical option.

Before committing to a custom build, visit completed projects if possible and speak with the builder about their process, timeline guarantees, and what happens if costs overrun. Get a detailed contract that specifies the final price, delivery date, and what is included. Many builders require a deposit upfront and progress payments as work advances.

What to inspect before you buy

Do not rely on specifications alone. Visit the camper in person and test every accessibility feature with your own mobility device or using the transfer method you actually use. Measure doorway widths, hallway clearances, and bathroom space with a tape measure. Sit in the driver's seat, the dinette, and the bed to confirm they work for you. Open and close cabinets and drawers to check that handles are reachable and that the effort required is manageable.

Test the ramp or lift multiple times, both empty and with weight on it, to listen for unusual sounds or movement. Check that the ramp angle is not too steep for your device and that the landing area is stable. If the camper has a wheelchair tie-down system, test the straps and anchors. Inspect the bathroom carefully: measure the shower opening, check the grab bar placement, and confirm that the toilet height and approach are suitable for your transfer method.

Ask the seller or dealer about maintenance history, warranty coverage, and what support they offer after purchase. Find out whether they provide training on operating the lift or ramp, and whether they have a service center nearby if something breaks. A camper that looks good on paper but requires a six-hour drive to the nearest authorized service center may not be practical for you.

Financing options for accessible campers

RV loans are the most common financing method. Banks, credit unions, and RV-specific lenders offer loans for camper purchases, typically with terms of five to fifteen years and interest rates that depend on your credit score and the loan amount. Down payments usually range from 10 to 20 percent. An RV loan is straightforward but does not account for the higher cost of accessible features.

Personal loans are another option, especially if you are buying a used camper or retrofitting one yourself. Personal loan terms are usually shorter (three to seven years) and interest rates higher than RV loans, but you have more flexibility in how you use the money. Some people combine a personal loan for the retrofit work with an RV loan for the base camper.

A few disability organizations and nonprofits offer grants or low-interest loans for vehicle modifications, though availability is limited and may be able to access varies by state and organization. The National Disability Rights Network and your state's vocational rehabilitation agency are starting points for research. Some states also have assistive technology programs that may help fund modifications. These sources rarely cover the full cost but can reduce what you need to borrow.

Used versus new: weighing the trade-offs

A used accessible camper costs less upfront but may have unknown maintenance issues and limited or no warranty. Inspect a used camper thoroughly, have a pre-purchase inspection done by an independent RV technician, and ask for service records. Used models also mean you are buying whatever accessibility features the previous owner chose, which may not match your needs perfectly.

A new or factory-built accessible camper costs more but comes with a manufacturer warranty, is built to current standards, and lets you choose features that fit your situation. New campers also have the latest technology and materials, which can mean better reliability and lower maintenance in the early years.

The middle ground is a recent used model (three to five years old) from a reputable dealer who can provide service history and may offer a limited warranty. This approach often gives you a better price than new while reducing the risk of hidden problems.

Frequently Asked Questions

Can I get a wheelchair lift installed on any camper?

Most campers can accommodate an external wheelchair lift, but the installation depends on the camper's structure, weight capacity, and electrical system. Heavier campers and those with aluminum frames are generally easier to retrofit. Have a conversion shop evaluate your specific camper before assuming a lift can be added.

What is the difference between a ramp and a lift?

A ramp is a sloped surface that you roll or walk up; it takes up more space and works best for manual wheelchairs or scooters with good traction. A lift is a motorized platform that raises and lowers; it takes up less space and works for heavier mobility devices but requires electrical power and maintenance. Most accessible campers use lifts because space is limited.

How much does it cost to retrofit a used camper I already own?

A basic retrofit with a lift, widened doorway, and accessible bathroom modifications typically costs $25,000 to $50,000, depending on the camper's current condition and what you add. Get quotes from at least two shops before committing, and ask whether the price includes labor, materials, and any necessary structural work.

Do I need a special license to drive an accessible camper?

No, but the camper's weight and length may require a commercial driver's license in some states. Check your state's DMV website or contact them directly. You may also need to notify your insurance company about accessibility modifications, as they can affect the camper's value and coverage.

Where can I see accessible campers before buying?

RV shows in spring and fall often feature accessible models. Contact local RV dealerships to ask about accessible inventory and whether they allow test drives. Bradd & Hall, Entervan, and other manufacturers sometimes host open houses or have videos on their websites showing their models in use.