What the GM ignition switch recall covers

General Motors recalled millions of vehicles between 2014 and 2016 for a defective ignition switch that could slip out of the "Run" position while driving. The switch primarily affected Chevrolet Cobalt, HHR, and Malibu models from 2003 to 2007, along with Pontiac G5, G6, and Solstice vehicles and Saturn Ion and Sky models in similar years. The problem caused engines to stall, power steering to fail, and airbags to not deploy in a crash.

GM identified the root cause as an ignition switch with an internal spring that could wear down over time, especially if the key had extra weight hanging from it or if the vehicle experienced rough road conditions. The company issued a Technical Service Bulletin (TSB) and later a formal recall, offering free replacement of the ignition switch at any GM dealership.

Key Takeaways

  • The GM ignition switch recall affects specific Chevrolet, Pontiac, and Saturn models from 2003 to 2007, and you can check if your vehicle is included by entering your VIN on the NHTSA website or GM's recall portal.
  • The defect causes the ignition to slip from "Run" to "Accessory," which stalls the engine and disables power steering and airbags while driving.
  • GM covers the full cost of replacement at any authorized GM dealership, and the repair typically takes one to two hours.
  • If you own a recalled vehicle and have not had the switch replaced, scheduling service now prevents potential safety failures on the road.

How to check if your vehicle is under recall

The fastest way to confirm whether your specific vehicle is affected is to visit the National Highway Traffic Safety Administration (NHTSA) website at safercar.gov and enter your Vehicle Identification Number (VIN). Your VIN appears on your registration card, insurance documents, and on the driver's side dashboard where it meets the windshield.

Alternatively, you can go directly to GM's recall information page and search by model year and vehicle type. Both tools will show you the recall number, the specific defect, and whether the repair has already been completed on your vehicle. If the recall shows as "open," the repair has not yet been done.

What happens when the ignition switch fails

The ignition switch can slip from the "Run" position to "Accessory" while you are driving, which when ready cuts power to the engine. The engine stalls, and you lose power steering information at the same moment—making the steering wheel suddenly much harder to turn. This combination creates an when ready safety hazard, especially at highway speeds or in traffic.

The stalling also disables the airbag system because the airbags only arm when the ignition is in the "Run" position. If a crash occurs while the engine is stalled, the airbags will not deploy. GM documented at least 13 deaths and 54 injuries linked to this defect before the recall was issued, though the company initially resisted acknowledging the problem.

The replacement process and what it costs

GM covers the entire cost of the ignition switch replacement at no charge to the vehicle owner. You do not need to pay a diagnostic fee, parts cost, or labor. The repair involves removing the steering column cover, disconnecting the old switch, and installing a new one with an improved internal spring design that resists wear.

The work typically takes one to two hours at a dealership. You can schedule an appointment online through most GM dealer websites or by calling the service department directly. Bring your vehicle registration and VIN. If your vehicle is still under the original manufacturer warranty, the repair is covered as part of that warranty; if not, the recall coverage applies regardless of age or mileage.

What to do if you have already paid for the repair

If you paid out of pocket to have the ignition switch replaced before the recall was issued or before you learned about it, you may be able to recover that cost. Contact your GM dealership with your repair invoice and explain that the work was for a recalled defect. GM has reimbursed owners in some cases, though the process varies by dealership and the timing of the repair.

Keep your original invoice and any documentation showing the repair was performed. If the dealership declines reimbursement, you can file a complaint with the NHTSA through their online complaint portal, which creates a record that may support a future claim or class action settlement.

Temporary steps if your ignition switch is slipping now

If you notice your engine stalling while driving or the dashboard lights flickering on and off, do not ignore it. These are signs the ignition switch is failing. Avoid driving the vehicle long distances until you can schedule the repair, because a stall at highway speed or in an intersection creates a serious crash risk.

In the short term, remove any heavy items from your key ring—extra keys, key chains, or fobs add weight that can accelerate the switch's failure. Do not jiggle or force the key while turning it; use smooth, deliberate motions. These steps will not fix the underlying defect, but they may slow its progression until you can get to a dealership.

Frequently Asked Questions

How do I know if my car has already been repaired under this recall?

Enter your VIN on safercar.gov or GM's recall portal. The system will show whether the repair has been completed. If it shows "open," the switch has not been replaced. You can also call your GM dealership with your VIN and they can look up the service history in their system.

What if I no longer own the vehicle but I paid for the repair?

You may still be able to seek reimbursement if you have the original repair invoice. Contact the dealership that performed the work with documentation of the repair and the recall number. Some GM dealers have honored reimbursement requests for previous owners, though this is not may provide.

Can I take my car to an independent mechanic instead of a GM dealership?

The recall repair must be performed at an authorized GM dealership to may support it is done correctly and to maintain your warranty coverage. Independent shops cannot access GM's recall parts or documentation. However, you can have other maintenance performed elsewhere.

Is there a important date to get this repair done?

There is no formal expiration date on the recall, but the longer you wait, the greater the risk of the switch failing while you drive. GM recommends scheduling the repair as soon as possible. If your vehicle is involved in a crash and the ignition switch failure is found to have contributed, liability questions may arise if the recall repair was known but not completed.

What if the replacement switch fails again after the repair?

The replacement switch uses an improved design that addresses the original defect. Failures of the new switch are extremely rare. If you experience stalling or flickering lights after the repair, contact the dealership when ready—the issue may be something else, such as a battery or electrical problem, that needs diagnosis.