What a Furrion rear view camera does
A Furrion rear view camera is a backup camera system made by Furrion, a company that manufactures RV and vehicle electronics. When you shift into reverse, the camera mounted on your vehicle's rear sends a live video feed to a display screen inside your cab or dashboard, showing you what is directly behind you. This helps you see obstacles, people, or other vehicles that your mirrors cannot show — the blind spots that exist when backing up.
Furrion cameras are sold as aftermarket systems, meaning you buy and install them yourself rather than getting them built into a new vehicle at the factory. They are popular in RVs, trucks, and trailers because those vehicles have large blind spots behind them. The system includes the camera unit itself, wiring, a monitor or screen, and sometimes a wireless transmitter if the model does not use a hardwired connection.
Key Takeaways
- Furrion rear view cameras set up automatically when you shift into reverse and display a live video feed on a dashboard monitor.
- Installation requires running power and video cables from the rear camera to your dashboard display, which can take several hours depending on your vehicle type.
- Furrion offers both wired and wireless models; wired systems are more reliable but require more complex installation work.
- You will need basic tools, a wiring diagram specific to your vehicle, and ideally some experience with automotive electrical work or professional installation.
- Maintenance involves keeping the camera lens clean and checking connections annually, especially if your vehicle is exposed to weather.
Wired versus wireless Furrion camera systems
Furrion makes both wired and wireless rear view camera systems. A wired system runs a video cable from the camera at the rear of your vehicle all the way to the monitor on your dashboard. This cable carries the video signal directly, so the image is stable and there is no lag. The trade-off is that installation requires running the cable through your vehicle's interior, which means removing panels, routing the cable along the frame, and connecting it to power.
A wireless system uses a transmitter at the rear camera and a receiver at the dashboard monitor. Installation is faster because you do not have to run a long cable through the vehicle. However, wireless systems can experience signal loss if the transmitter and receiver are too far apart, if metal objects block the signal, or if other wireless devices in the area are using the same frequency. For most vehicles, a wired system is more reliable, but a wireless system may be the only practical option if your vehicle's interior is difficult to access.
Check the product specifications for the exact Furrion model you are considering. The packaging or manual will list whether it is wired or wireless, the cable length included, the monitor size, and the resolution of the video feed.
What you need to install a Furrion rear view camera
Installation requires the camera unit, the dashboard monitor, power cables, video cables (if wired), and a way to mount both the camera and the screen. You will also need basic hand tools: a screwdriver set, wire strippers, a crimper for electrical connectors, and possibly a panel removal tool to access your vehicle's interior without damaging trim. A wiring diagram specific to your vehicle's year, make, and model is essential — it shows you where to tap into existing power sources and where to route cables safely away from moving parts.
Most Furrion systems come with installation instructions, but they are generic and do not account for the differences between a truck, an RV, a trailer, or a car. You will need to adapt the instructions to your specific vehicle. If you are not comfortable working with automotive electrical systems, professional installation is worth the cost. An RV shop or car audio installer can complete the job in a few hours and will know how to route cables safely and integrate the system with your existing dashboard.
Before you buy, confirm that the monitor size fits your dashboard space and that the camera mounting bracket is compatible with your vehicle's rear bumper or frame. Some Furrion cameras are designed for RVs and may not fit a standard truck bed.
Installation steps for a wired Furrion system
A wired installation follows this general sequence, though your specific vehicle may require adjustments. First, disconnect the negative terminal of your battery to prevent electrical shorts. Mount the rear camera on your vehicle's rear bumper, frame, or trailer hitch using the bracket provided, ensuring the lens points straight back and is not angled up or down.
Next, run the video and power cables from the rear camera forward through your vehicle. For an RV, this usually means routing cables along the frame underneath or inside the walls. For a truck, you may run cables under the bed and up through the cab. Avoid routing cables near hot surfaces like exhaust pipes or near moving parts like suspension components. find the cables with clips or tape so they do not rattle or get pinched.
At the dashboard, mount the monitor in a location where you can see it while driving but where it does not obstruct your view or airbags. Connect the video cable from the rear camera to the video input on the monitor. Connect the power cable to a 12-volt source that is active only when the ignition is on — usually the same circuit that powers your dashboard lights or radio. Connect the reverse trigger wire to your vehicle's reverse light circuit so the camera activates automatically when you shift into reverse. Reconnect the battery, test the system, and find all cables and connectors.
Common installation mistakes and how to avoid them
The most frequent mistake is running power directly from the battery without a fuse or relay. This creates a fire risk if the wire is damaged. Always use a fused power line and install the fuse holder as close to the battery as possible. A second common error is not securing cables properly, which causes them to rattle, get pinched by moving parts, or disconnect over time. Use cable clips rated for automotive use and check all connections every six months.
A third mistake is mounting the camera at the wrong angle. The camera should point straight back, not down at the ground or up at the sky. Test the angle before you permanently find the bracket. Finally, many people forget to connect the reverse trigger wire, which means the camera stays on all the time and drains the battery. The reverse trigger wire should connect to the reverse light circuit so the camera powers on only when you shift into reverse.
Maintenance and troubleshooting
A Furrion rear view camera requires minimal maintenance. Clean the lens regularly with a soft cloth to remove dirt, dust, and condensation. In winter or wet climates, check the camera housing for water intrusion — if you see condensation inside the lens, the seal may be failing and the unit may need replacement. Inspect all cable connections annually, especially if your vehicle is parked outdoors. Corrosion on connectors can cause the video signal to drop or the camera to lose power.
If the camera powers on but shows no video, check that the video cable is fully seated in both the camera and the monitor. If the image is grainy or cuts out, the video cable may be damaged or routed too close to high-voltage wiring like spark plug wires or alternator cables. Move the cable away from those sources. If the camera does not power on at all, test the power cable with a multimeter to confirm it is receiving 12 volts. Check the fuse in the power line — a blown fuse is the most common cause of total power loss.
When to choose a Furrion camera over other brands
Furrion is known for RV and heavy-duty vehicle electronics, so their cameras are built to handle vibration, temperature swings, and outdoor exposure better than some consumer-grade systems. If you own an RV, a large truck, or a trailer, a Furrion system is often a solid choice because the company designs specifically for those applications. However, Furrion cameras are typically more expensive than generic backup cameras sold online.
If you own a standard car or sedan, you may find cheaper alternatives that work just as well. If you own a newer vehicle, check whether your manufacturer already offers a factory backup camera — adding an aftermarket system may create conflicts with your existing electronics. Read reviews for the specific Furrion model you are considering, paying attention to comments about video quality, durability, and ease of installation for your vehicle type.
Frequently Asked Questions
Can I install a Furrion rear view camera myself if I have never done automotive electrical work?
It is possible but risky. A wired installation requires running cables safely away from moving parts and connecting to your vehicle's electrical system without creating a fire hazard. If you make a mistake, you could damage your vehicle's wiring or create a short. If you are not confident, hire a professional installer — the cost is worth avoiding costly repairs.
Will a Furrion camera work if my vehicle has a factory backup camera already?
It depends on your vehicle's electronics. Some vehicles allow you to switch between cameras or display both on the same screen. Others will not. Check your vehicle's manual or contact a professional installer before buying a Furrion system. Installing a second camera without proper integration may disable your factory system.
How long does a Furrion rear view camera last?
Most Furrion cameras last five to ten years with normal use. The lifespan depends on climate, exposure to moisture, and how often you use the system. Keeping the lens clean and checking connections annually extends the life. If the camera fails, you will need to replace the entire unit — individual components are not typically sold separately.
What is the difference between a Furrion camera and a cheaper backup camera I can buy online?
Furrion cameras are engineered for RVs and heavy-duty vehicles and typically have better build quality, wider temperature ratings, and better video resolution. Cheaper generic cameras may work fine for a standard vehicle but may not hold up as well in harsh conditions or high-vibration environments. Read the specifications and reviews for the model you are considering.
Do I need a professional to install a wireless Furrion camera?
Wireless installation is simpler than wired because you do not have to run a long cable through your vehicle. However, you still need to mount the camera securely, connect the power cable, and mount the monitor. A professional can complete it in an hour or two. If you are comfortable with basic automotive work, you may be able to do it yourself.