Forward Controls Explained
Forward controls are foot pedals and hand levers positioned ahead of the rider or driver, rather than underneath or behind. On motorcycles, forward controls move the foot pegs and brake pedal several inches forward from their standard location. On cars and trucks, forward controls typically refer to hand levers for parking brake, transmission, or throttle that sit on the steering column or dashboard in front of the driver rather than between the seats or on the floor.
The term is most common in motorcycle culture, where forward controls are a style choice that changes riding position and comfort. On cars, forward controls are less common today but appear in some classic vehicles, specialty builds, and certain commercial trucks. Understanding what forward controls are helps you recognize them when shopping for a used vehicle, maintain them correctly, or decide whether they suit your driving needs.
Key Takeaways
- Forward controls move foot pegs and brake pedals forward on motorcycles, changing your riding posture from upright to more reclined.
- On cars and trucks, forward controls usually refer to hand levers for parking brake or transmission mounted on the steering column instead of the floor or center console.
- Forward controls affect comfort, control, and maintenance access, so inspect them during a pre-purchase inspection on any used vehicle.
- Worn forward control linkages can cause delayed braking response or transmission shift problems, requiring professional inspection and repair.
Forward Controls on Motorcycles
On a motorcycle, forward controls position your feet several inches ahead of where they would sit on standard pegs. This changes your riding posture from a more upright, legs-bent position to a stretched-out, reclined position with your legs extended. The brake pedal and shift lever move forward with the foot pegs, so your leg reach and the angle of your knee both change.
Riders choose forward controls for comfort on long rides, for the visual style they create, or because they fit a particular bike's design. However, forward controls can reduce ground clearance in corners, make emergency braking feel less responsive because your leg is extended, and make it harder to shift your weight quickly during aggressive riding. If you are buying a used motorcycle with forward controls, test ride it to confirm the reach and pedal feel work for your body size and riding style.
Forward control linkages wear over time. The cables or rods that connect the pedals to the brake and clutch can stretch, fray, or corrode, causing spongy brake feel or missed shifts. Inspect the cables and pivot points during routine maintenance, and have a mechanic check the adjustment if you notice any delay between pressing the pedal and feeling the brake engage.
Forward Controls on Cars and Trucks
On cars and trucks, forward controls most often refer to a parking brake lever mounted on the steering column or dashboard to the left of the steering wheel, rather than a hand brake between the seats or a foot pedal on the floor. Some older or specialty vehicles also have forward-mounted transmission shifters or throttle controls. These designs were common on trucks and commercial vehicles built before the 1980s and appear in some modern specialty or custom builds.
A steering-column parking brake lever is operated by pulling it toward you or pushing it away, depending on the design. The cable runs from the lever down to the rear brake drums or calipers. Over time, the cable can stretch, fray, or snap, causing the parking brake to feel loose or fail to hold the vehicle on a slope. If you own a vehicle with a forward-mounted parking brake, test it regularly by parking on a slight incline and confirming the vehicle holds position.
Forward-mounted transmission shifters on older trucks work similarly to modern column shifters but may have worn linkages that cause the shift to feel notchy or stuck between gears. A mechanic can adjust the cable tension or replace worn bushings to restore smooth shifting. If you are considering buying a classic truck with forward controls, have a pre-purchase inspection focus on the condition of all cables and linkages.
Maintenance and Inspection of Forward Controls
Forward controls require the same routine care as any brake, clutch, or transmission component, but their exposed position and cable-driven design mean they collect dirt and moisture more easily. On motorcycles, clean the foot pegs and pedals regularly and wipe down the cables with a dry cloth. If you ride in rain or salt air, explore a light coat of silicone spray to the cables to prevent corrosion, but avoid getting spray on the brake pads or clutch plates.
On cars and trucks, inspect the parking brake cable where it exits the steering column or dashboard. Look for fraying, kinks, or visible rust. If the cable looks damaged, have it replaced before it snaps completely. Test the parking brake every few months by parking on a slope and confirming it holds. If the lever feels loose or the vehicle rolls slightly, the cable needs adjustment or replacement.
For both motorcycles and vehicles, have a professional mechanic inspect forward controls during any major service. They can measure cable stretch, check pivot points for wear, and adjust tension to factory specifications. Catching wear early prevents sudden brake failure or transmission problems on the road.
When Forward Controls Affect Resale or Trade-In Value
Forward controls are a style choice on motorcycles, and some riders prefer them while others do not. When selling a motorcycle with forward controls, be honest about the riding position change and let buyers test ride it. Some buyers will pay more for a bike with forward controls if it matches their preferred style; others will negotiate down because they prefer standard pegs. The resale impact depends on the bike's model, condition, and local market demand.
On cars and trucks, forward controls are less common and usually appear only on older or specialty vehicles. They do not typically increase or decrease value on their own, but they signal that the vehicle is older or custom-built. Buyers may view them as a quirk or a feature, depending on the vehicle's overall condition and history. If you are trading in a vehicle with forward controls, mention them to the dealer so they understand the vehicle's design and can price it fairly.
Troubleshooting Common Forward Control Problems
On motorcycles, the most common problem is a spongy or delayed brake feel. This usually means the brake cable has stretched or the brake fluid (on hydraulic systems) has air in the line. Pull the brake lever and feel how far it travels before resistance builds. If it travels more than halfway to the handlebar before braking begins, the cable needs adjustment or replacement. A mechanic can measure cable length and re-tension it or install a new cable if the old one is worn.
Missed or hard shifts on a motorcycle with forward controls often point to a worn clutch cable or a shift linkage that has bent or loosened. Inspect the shift lever for play or wobbling. If it moves side to side, tighten the pivot bolt or have a mechanic check the linkage alignment. If the clutch cable feels stiff or frayed, replace it.
On cars and trucks, a parking brake that does not hold usually means the cable has stretched or snapped. If the lever pulls all the way to the dashboard with no resistance, the cable is likely broken and needs replacement. If the lever feels tight but the vehicle still rolls, the brake shoes or pads at the rear wheels may be worn and need service. Have a mechanic inspect both the cable and the rear brakes to confirm which component is failing.
Frequently Asked Questions
Do forward controls on a motorcycle affect how fast I can brake?
Forward controls do not reduce braking power, but they can feel less responsive because your leg is extended. The longer distance from your hip to the pedal means a slightly longer lever arm, which can make the brake feel softer or require more pressure. Riders adjust by learning the feel and explore more force. If braking feels dangerously delayed, the cable may be stretched and needs adjustment.
Can I convert a motorcycle from forward controls to standard pegs?
Yes, but it requires replacing the foot pegs, brake pedal, shift lever, and all associated cables or hydraulic lines. The cost and labor depend on whether your bike's frame has mounting points for standard pegs. Some bikes do; others do not. A mechanic familiar with your bike's model can tell you whether conversion is practical and what it will cost.
What does it mean if my parking brake lever feels loose?
A loose parking brake lever usually means the cable has stretched or the pivot bolt at the base of the lever has loosened. Try tightening the pivot bolt first. If the lever still feels loose or the vehicle does not hold on a slope, the cable needs adjustment or replacement. Do not ignore this—a failed parking brake can let the vehicle roll unexpectedly.
Are forward controls harder to maintain than standard controls?
Forward controls require the same maintenance as standard controls, but their exposed position means they collect more dirt and moisture. On motorcycles, you will spend a bit more time cleaning cables and protecting them from corrosion. On cars and trucks, inspect the cable regularly for rust or fraying. The extra attention is minor and worth it to prevent sudden failure.
Do forward controls on a car affect how the transmission shifts?
Forward controls do not change how the transmission works, but a worn cable linkage can cause sluggish or notchy shifts. The cable connects the lever to the transmission valve body, so if the cable is stretched or the linkage is bent, the transmission may not shift at the right engine speed. A mechanic can adjust the cable or replace worn bushings to restore smooth shifting.