A Ford 6.7 delete kit removes or disables emissions control systems from your diesel engine
A 6.7 delete kit is an aftermarket modification that removes or bypasses the emissions control equipment on Ford's 6.7-litre Power Stroke diesel engine, found in Super Duty trucks from 2011 onwards. The kit typically targets the diesel particulate filter (DPF), exhaust gas recirculation (EGR) system, and sometimes the selective catalytic reduction (SCR) system. When installed, it prevents these components from functioning.
Owners install delete kits for three main reasons: to increase engine power output, to avoid the cost and inconvenience of emissions system maintenance, and to prevent the limp-mode condition that occurs when these systems fail or become clogged. A clogged DPF, for example, forces the engine into reduced-power mode until the filter regenerates or is cleaned—a process that can take hours and consume fuel. A delete kit eliminates that problem entirely by removing the filter.
However, delete kits carry serious legal and mechanical consequences. Removing emissions equipment violates the Clean Air Act at the federal level and state emissions laws in most jurisdictions. Selling, installing, or advertising a delete kit is illegal under EPA regulations. Driving a truck with a delete kit installed can result in fines, failed emissions testing, and difficulty selling the vehicle. The engine may also run hotter and wear faster without the cooling effect that EGR systems provide.
Key Takeaways
- A delete kit removes the DPF, EGR, and sometimes SCR systems that reduce emissions from your 6.7 diesel engine.
- Owners choose delete kits to gain horsepower, avoid maintenance costs, and prevent limp-mode failures, but these gains come with legal risk.
- Removing emissions equipment violates federal EPA law and state emissions regulations, and can result in fines and vehicle registration denial.
- Engines without EGR cooling run hotter and may experience accelerated wear, higher fuel consumption, and increased internal stress.
- If you own a truck with a delete kit, removing it before selling or trading it in protects you from liability and disclosure issues.
What each component does and why it gets deleted
The diesel particulate filter (DPF) traps soot and ash from the exhaust before it leaves the tailpipe. Over time, the filter fills up and must regenerate—a process where the engine burns off the trapped particles at high temperature. This regeneration happens automatically during highway driving, but in stop-and-go city use, the filter can clog faster than it regenerates. When clogged, the engine enters limp mode: power drops, fuel economy worsens, and the check-engine light comes on. Owners delete the DPF to eliminate regeneration cycles and the limp-mode risk entirely.
The exhaust gas recirculation (EGR) system routes a portion of exhaust back into the intake manifold to lower combustion temperatures and reduce nitrogen oxide emissions. On the 6.7, the EGR cooler is prone to internal leaks and carbon buildup, which can damage the engine if coolant enters the cylinders. Deleting the EGR system removes this failure point and allows the engine to run hotter, which increases combustion efficiency and power output. However, running without EGR cooling means the engine operates at higher temperatures continuously, which accelerates wear on pistons, rings, and valve seats.
The selective catalytic reduction (SCR) system injects diesel exhaust fluid (DEF) into the exhaust stream to convert nitrogen oxides into harmless nitrogen and water. Some delete kits disable the SCR by removing the DEF tank and injector, while others leave it in place but disable the sensor that triggers injection. Owners delete SCR to avoid the cost of DEF fluid (which must be refilled every 10,000 to 15,000 miles) and to prevent SCR-related faults that can trigger limp mode.
Why emissions systems fail and what repair costs look like
The 6.7 Power Stroke's emissions systems are complex and operate in a harsh environment—high heat, soot, and corrosive exhaust gases. The DPF can clog if the engine is not driven hard enough to regenerate it regularly, or if fuel injectors are worn and producing excess soot. The EGR cooler develops internal leaks from thermal stress and corrosion. The SCR system can fail if DEF quality is poor, the injector clogs, or the heater element burns out. When any of these systems fail, the engine enters limp mode and power drops to a crawl.
Repair costs are substantial. A DPF replacement runs between $1,500 and $3,500 depending on whether it is cleaned or replaced new. An EGR cooler replacement costs $1,200 to $2,000 in parts and labour. An SCR injector or heater replacement can run $800 to $1,500. These are not one-time costs—a truck driven hard or in dusty conditions may need DPF service multiple times over its life. A delete kit eliminates these repair bills, which is why many owners see it as a cost-saving measure, even though it is illegal.
The legal consequences of owning and driving a deleted truck
The Clean Air Act makes it illegal to remove, disable, or defeat any emissions control device on a vehicle in use. The EPA enforces this rule through civil penalties that can reach $37,500 per vehicle for manufacturers and sellers of delete kits, and up to $7,500 per vehicle for owners who knowingly operate a deleted truck. Individual states add their own penalties: California, for example, can impose fines of $1,000 to $10,000 and deny vehicle registration renewal until the emissions systems are restored.
Emissions testing is where most owners encounter the law. When you renew your registration in a state that requires emissions testing, a deleted truck will fail the tailpipe test because it produces excess nitrogen oxides and particulates. You cannot register the vehicle until the systems are restored. In states without tailpipe testing, the risk is lower but not zero—a roadside inspection or a traffic stop can expose a delete kit, and law enforcement can issue citations.
Selling or trading in a deleted truck creates additional liability. If you sell the truck without disclosing the delete kit, the buyer can pursue legal action if they discover it later and face registration or emissions issues. Dealerships performing trade-ins often refuse deleted trucks outright, or demand that the owner pay for restoration before accepting the vehicle. Some dealers will accept a deleted truck but deduct the cost of restoration from the trade-in value—often $2,000 to $4,000.
Performance gains versus engine durability trade-offs
A delete kit typically adds 50 to 100 horsepower and 100 to 150 pound-feet of torque to a 6.7 Power Stroke, depending on the kit and whether it is paired with a tuner that adjusts fuel injection timing. This power increase is real and noticeable—acceleration improves, towing feels easier, and the truck feels more responsive. However, this power comes from running the engine hotter and leaner, which accelerates wear on internal components.
Without the EGR system cooling the intake charge, combustion temperatures rise. Pistons, rings, and valve seats experience higher thermal stress. Fuel consumption often increases because the engine is working harder and running hotter. Oil breakdown accelerates at higher temperatures, meaning oil changes may need to happen more frequently to prevent sludge and varnish buildup. Over 100,000 miles, a deleted engine may show signs of wear—increased blow-by, higher oil consumption, or carbon buildup on intake valves—that a stock engine would not experience.
The durability impact depends on how the truck is driven. A truck used for light towing and highway driving may show minimal wear. A truck used for heavy towing in hot climates or dusty conditions will wear faster. Warranty coverage is also affected: any engine damage that occurs after a delete kit is installed will not be covered by Ford, even if the damage is unrelated to the deletion.
Restoring emissions systems if you need to sell or register the truck
If you own a deleted truck and need to restore it for registration or sale, the process involves reinstalling or re-enabling the deleted components. A DPF must be physically reinstalled if it was removed, or the exhaust piping must be reconfigured to route exhaust through the original filter location. An EGR cooler must be reinstalled and the EGR valve re-enabled. An SCR system must be reactivated and the DEF tank refilled. The engine control module (ECM) must be reprogrammed to its original factory settings to remove the delete tune.
Restoration costs vary. If the original components were removed and discarded, you will need to source used or new replacements—a DPF alone can cost $1,500 to $3,500 new. If the components are still in place but disabled, reprogramming the ECM and re-enabling the systems costs $500 to $1,500 at a diesel shop. Labour adds another $500 to $2,000 depending on complexity. Total restoration can run $2,000 to $6,000, which is why many owners delay restoration until they are forced to by a registration important date or a sale.
Some diesel shops specialise in restoration and can do the work quickly—often in a day or two. Others may need to order parts or send the ECM to a specialist for reprogramming. If you are planning to sell the truck, budget for restoration costs and factor them into your asking price or trade-in negotiation.
Why the 6.7 emissions systems are targets for deletion
The 6.7 Power Stroke, introduced in 2011, was Ford's first diesel to include a full suite of modern emissions controls: DPF, EGR, and SCR. These systems were new technology at the time, and early versions had reliability issues. The EGR cooler, in particular, became notorious for internal leaks that could damage the engine. The DPF was prone to clogging in city driving. These early failures created a reputation that persists today, even though Ford has improved the systems over the years.
The 6.7 also became popular in the diesel tuning community, where delete kits and performance tunes are widely available and heavily marketed. Online forums and social media amplify the appeal of delete kits by showcasing power gains and downplaying legal and durability risks. This cultural momentum makes deletion seem normal or acceptable within certain owner communities, even though it remains illegal and carries real consequences.
Frequently Asked Questions
Will a delete kit make my truck pass emissions testing?
No. A delete kit removes the equipment that reduces emissions, so your truck will produce more nitrogen oxides and particulates—the opposite of what an emissions test measures. Your truck will fail the test and cannot be registered until the systems are restored.
Can I install a delete kit myself, or do I need a shop?
Installation requires mechanical skill and specialized tools. Removing the DPF involves breaking into the exhaust system, which requires a lift and welding equipment. Reprogramming the ECM requires a laptop and tuning software. Most owners take their trucks to a diesel shop, which charges $1,500 to $3,000 for a full delete installation.
What happens if I get pulled over with a deleted truck?
A police officer cannot see a delete kit during a routine traffic stop unless they inspect the exhaust system or scan the engine computer. However, if you are stopped for a separate reason and the officer notices a modified exhaust or checks your emissions history, they can issue a citation. The risk is higher during vehicle inspections or roadside safety checks.
If I delete my truck, can I restore it later without damage?
Restoration is possible, but the engine may have already experienced wear from running hotter and leaner. If the original components were removed and discarded, you will need to source replacements, which adds cost. The longer the truck runs deleted, the more likely internal wear has occurred.
Does a delete kit void my Ford warranty?
Yes. Any modification to emissions systems voids the powertrain warranty. Ford will not cover engine repairs or failures on a deleted truck, even if the damage is unrelated to the deletion. This is a significant financial risk if a major engine problem occurs.