What F-150 Tailgate information does
Tailgate information is a hydraulic damping system that slows the tailgate's fall when you open it, preventing it from slamming down hard or pinching your fingers. Instead of dropping freely, the tailgate descends at a controlled speed. When you close it, the system also eases the tailgate shut rather than letting it slam.
The feature is built into the tailgate itself and requires no buttons or switches — it works automatically whenever you open or close the gate. Ford introduced this system on F-150s starting in 2015, and it comes standard on many trim levels, though availability varies by model year and cab style.
This is different from Power Tailgate, which uses a motor to open and close the gate for you. Tailgate information is purely mechanical and hydraulic; it just controls the speed of manual operation.
Key Takeaways
- Tailgate information uses hydraulic cylinders to slow the tailgate's descent and closing, preventing hard slams and pinch injuries.
- The system is passive and requires no buttons or switches — it works automatically on every open and close cycle.
- It comes standard on many F-150 models from 2015 onward, but check your truck's window sticker or owner's manual to confirm your truck has it.
- Tailgate information is a sealed system; if it fails, the tailgate will drop or close at normal speed, and the hydraulic cylinders usually cannot be repaired individually.
Which F-150 model years and trims include it
Ford began offering Tailgate information on the 2015 F-150 generation (the 13th generation, which ran through 2020). It became standard equipment on most trim levels starting around the mid-2015 model year, though some early 2015 trucks and certain cab configurations may not have it.
On the 2021-and-newer generation (14th generation), Tailgate information is standard on most SuperCrew and SuperCab models. Regular Cab trucks are less likely to have it as standard. The best way to confirm whether your specific truck has the system is to check the Monroney label (the window sticker from the dealer) or your owner's manual supplement.
If you own an F-150 older than 2015, your truck does not have Tailgate information. Retrofitting the system is not a practical DIY job because it requires replacing the entire tailgate assembly with one that includes the hydraulic cylinders.
How the hydraulic cylinders work
Tailgate information uses two small hydraulic cylinders mounted inside the tailgate, one on each side. These cylinders are filled with pressurized fluid and connected to the tailgate hinges. When you open the gate, the cylinders resist the motion and meter out fluid slowly, creating a damping effect that slows the fall.
The cylinders are sealed units and do not require maintenance or fluid top-ups under normal conditions. The system is designed to last the life of the truck, though the hydraulic fluid inside can degrade over time or if the cylinders develop a leak.
When you close the tailgate, the same cylinders work in reverse, slowing the closing motion so the gate does not slam shut. This two-way damping is what makes the system useful for both safety and convenience.
Signs your Tailgate information is failing
The most obvious sign is that your tailgate no longer descends slowly — it will drop quickly or even slam down as if the system were not there. You may also notice the tailgate closes harder than it used to, or that it requires more force to pull it fully open.
A slow leak in one of the hydraulic cylinders is the most common failure mode. If only one cylinder leaks, you may notice the tailgate tilts slightly to one side as it opens or closes. If both cylinders fail, the tailgate behaves like a truck without Tailgate information at all.
Rust or corrosion on the cylinder rods can also cause the seals to fail over time, especially in trucks exposed to road salt or stored outdoors. Once a cylinder begins to leak, it will not seal itself, and the system will gradually lose its damping effect.
Repair and replacement options
If your Tailgate information fails, you have two main options: replace the entire tailgate assembly, or disable the system and live without it.
A complete tailgate replacement at a Ford dealership typically costs between $800 and $1,500 in parts and labor, depending on your truck's year and whether you choose an OEM (original equipment manufacturer) part or an aftermarket alternative. Some aftermarket tailgates with Tailgate information are available for less, but quality and warranty coverage vary.
The individual hydraulic cylinders cannot be serviced or refilled by a technician — they are sealed units designed to be replaced as part of the tailgate assembly. Some independent shops may attempt to rebuild or reseal the cylinders, but this is not a common or widely recommended repair, and warranty coverage is limited.
If you choose not to repair it, your tailgate will function normally otherwise; Tailgate information is a convenience and safety feature, not a structural component. You will straightforward need to be more careful when opening and closing the gate, especially around children or pets.
Maintenance and care
Tailgate information requires no routine maintenance. The hydraulic cylinders are sealed and do not need fluid checks or adjustments. You should not attempt to lubricate or service them yourself, as doing so can damage the seals and accelerate failure.
To extend the life of your system, rinse your tailgate with fresh water after exposure to road salt or harsh weather. Corrosion on the cylinder rods is one of the main causes of seal failure, so keeping the tailgate clean can help prevent premature wear.
If you notice any fluid leaking from the tailgate hinges or cylinders, have it inspected by a Ford dealership or may have access to technician. A small leak can be monitored, but once the system loses its damping effect noticeably, replacement is usually the only practical solution.
Tailgate information versus Power Tailgate
Ford offers Power Tailgate as a separate, optional feature on some F-150 models. Power Tailgate uses an electric motor to open and close the gate for you — you press a button on the key fob or dashboard, and the tailgate moves automatically. Tailgate information, by contrast, is purely mechanical and only slows the speed of manual operation.
Power Tailgate is more expensive to repair if it fails, because it involves electrical components, a motor, and a control module in addition to the tailgate itself. Tailgate information is simpler and less likely to fail, but it also does less — it does not open or close the gate for you.
Some trucks have both systems: Tailgate information for smooth manual operation, and Power Tailgate for hands-free opening and closing. Others have one or the other, or neither. Check your truck's features in the owner's manual or on the Monroney label to see which systems your F-150 includes.
Frequently Asked Questions
Can I add Tailgate information to an older F-150 that doesn't have it?
Not practically. Tailgate information is built into the tailgate assembly itself, so adding it would require replacing the entire tailgate with one that includes the hydraulic cylinders. The cost and labor would be similar to a full tailgate replacement, making it an expensive retrofit for a feature that is primarily a convenience.
What happens if one of the hydraulic cylinders leaks?
The tailgate will gradually lose its damping effect. If only one cylinder leaks, the tailgate may tilt to one side as it opens or closes. Once you notice the system is not working, the cylinders cannot be refilled or repaired individually — the entire tailgate assembly must be replaced.
Is Tailgate information the same as Power Tailgate?
No. Tailgate information slows the speed of manual opening and closing. Power Tailgate uses a motor to open and close the gate for you with a button. Some trucks have both, some have one, and some have neither. Check your owner's manual to see which your truck has.
Do I need to replace my tailgate if Tailgate information stops working?
No. Your tailgate will still open and close normally; it will just drop and close faster without the hydraulic damping. You can continue using your truck safely, but you will need to be more careful around fingers and small objects when operating the tailgate.
How much does it cost to replace a tailgate with Tailgate information?
A complete OEM tailgate replacement at a Ford dealership typically costs $800 to $1,500 in parts and labor, depending on your truck's year and configuration. Aftermarket tailgates may cost less, but quality and warranty vary. Prices differ by region and dealership.