Where to buy a used forklift and what to expect to pay

Used forklifts typically cost 40 to 60 percent less than new ones, depending on the model, age, and condition. You can find them through equipment dealers, online marketplaces like Facebook Marketplace and Craigslist, auction sites, and heavy equipment brokers. Local equipment rental companies sometimes sell their older units when they upgrade their fleet. The price you pay depends on lift capacity (how much weight it can carry), mast height, fuel type (electric, propane, or diesel), and hours of operation.

Before you buy, know what you actually need. A forklift rated for 5,000 pounds at a 48-inch load center is not the same as one rated for 10,000 pounds. Buying more capacity than you need wastes money; buying less means you cannot do the work. Write down the maximum weight you need to lift, the height you need to reach, and whether you will use it indoors (electric is better) or outdoors (propane or diesel works in any weather).

Key Takeaways

  • Used forklifts cost significantly less than new ones, but price depends on lift capacity, mast height, fuel type, and total hours of operation.
  • Equipment dealers, online marketplaces, auctions, and rental companies are the main sources, and each has different return policies and warranty terms.
  • Before buying, inspect the mast, hydraulic hoses, tires, and engine or battery for damage or wear that will cost money to repair.
  • Certified refurbished forklifts from dealers come with some warranty protection, while private sales are usually sold as-is with no recourse.
  • Rental and maintenance costs after purchase can exceed the initial price, so factor in fuel, repairs, and storage before deciding to buy.

What to inspect when you look at a used forklift in person

Do not buy a forklift without seeing it and testing it. Check the mast by raising and lowering it fully several times—it should move smoothly without jerking, grinding, or leaking hydraulic fluid. Look at the hydraulic hoses for cracks, leaks, or bulges. Damaged hoses are expensive to replace and a safety hazard. Inspect the tires or wheels for uneven wear, cracks, or bald spots; replacement tires add several hundred dollars to your cost.

Start the engine or charge the battery and listen for unusual noises. A rough idle, knocking, or grinding usually means engine or transmission problems. If it is electric, ask how many charge cycles the battery has had and whether the charger works. Batteries degrade over time and can cost $3,000 to $8,000 to replace depending on the model. Check the load backrest and safety cage for dents or cracks—these are structural and cannot be ignored.

Ask for the service history. A forklift with regular maintenance records is worth more than one with no documentation, because you know what has been repaired and what might fail next. If the seller cannot produce records, assume the machine has been neglected and price your offer accordingly.

Certified refurbished forklifts versus private sales

A certified refurbished forklift from a dealer has been inspected, repaired, and tested to meet safety standards. The dealer usually offers a warranty—typically 30 to 90 days on parts and labor—and can service it if something breaks. You pay more upfront, but you have legal recourse if the machine fails shortly after purchase. The dealer's reputation is on the line, so they are less likely to hide problems.

A private sale is almost always sold as-is, meaning you own whatever problems exist the moment you hand over money. If the engine fails the day after you buy it, you have no claim against the seller unless you can prove they knowingly lied about its condition. Private sales are cheaper, but the risk is yours alone. If you are not experienced with heavy equipment, a dealer sale is safer even though it costs more.

Online marketplaces and auction sites

Facebook Marketplace, Craigslist, and Letgo connect you directly to private sellers and some small dealers. Prices are often lower because there is no middleman, but you have no protection if the machine does not work as described. Always arrange an inspection before you commit to buy. Ask the seller specific questions: How many hours has it run? Has it been in an accident? Are there any leaks? Does it lift smoothly? A seller who avoids detailed answers is a red flag.

Heavy equipment auction sites like IronPlanet, Machinery Values, and local government auctions sometimes have forklifts. Auctions can offer good prices, but you usually cannot inspect the machine in person before bidding. Read the condition description carefully—"fair" or "poor" condition means significant repairs will be needed. Factor repair costs into your maximum bid so you do not overpay chasing a bargain.

Rental companies and equipment dealers as sources

Rental companies like United Rentals and Sunbelt Rentals sell their used equipment when they retire it from the fleet. These machines have been maintained regularly because rental companies cannot afford downtime. The downside is that rental equipment is often worked hard and may have higher hours than a privately owned forklift. Rental company sales are usually final, but the maintenance history is solid.

Local equipment dealers carry both new and used forklifts. They know the machines they sell, can answer technical questions, and often provide limited warranties. Dealers also handle financing, which can make a larger purchase more manageable. Prices are higher than private sales, but you get informed and some protection. Ask whether the dealer will service the machine after you buy it—some will, some will not.

Financing and total cost of ownership

The purchase price is only part of what a forklift costs. Budget for fuel or electricity, maintenance, repairs, storage, and insurance. An electric forklift costs less to operate than a propane or diesel model, but the battery will eventually need replacement. Propane forklifts are cheaper to fuel but require a propane supplier nearby. Diesel forklifts are durable but produce emissions and are not allowed indoors in many places.

Maintenance includes regular inspections, oil changes, filter replacements, and hydraulic fluid top-ups. A well-maintained forklift might cost $1,000 to $2,000 per year in routine maintenance; a neglected one can cost much more when major repairs become necessary. If you do not have a mechanic on staff, you will pay a dealer or independent shop for repairs, which adds up quickly.

Some dealers and banks offer financing for used forklifts. Interest rates and terms vary, but financing spreads the cost over time. Compare the total amount you will pay (purchase price plus interest) against paying cash if you have it. If you plan to use the forklift for only a few years, renting might be cheaper than buying and maintaining it.

Red flags and common problems to avoid

Do not buy a forklift with a cracked or bent frame, even if the price is very low. Frame damage is structural and cannot be safely repaired. Do not buy one with a leaking engine or transmission—these repairs are expensive and the machine will not run reliably. Avoid forklifts with unknown history or no service records unless you are buying them for parts or scrap.

Be cautious of sellers who rush you or pressure you to buy without inspection. A legitimate seller will let you take time to look the machine over and ask questions. If a seller will not let you test-drive it or inspect the engine, walk away. The cheapest forklift is not a bargain if it breaks down a week after you buy it and costs thousands to repair.

Frequently Asked Questions

How many hours is too many for a used forklift?

Forklifts with 5,000 to 10,000 hours are typically considered mid-life if they have been maintained. Above 15,000 hours, major components like the engine or transmission may be near the end of their service life. Hours alone do not tell the whole story—a well-maintained 20,000-hour forklift can be more reliable than a neglected 8,000-hour one. Always ask for service records to understand how the machine has been treated.

Can I buy a forklift without a license to operate it?

Yes, you can buy a forklift without a license. However, anyone who operates it must have a valid forklift certification or license, which varies by state and employer. Your state's OSHA office or your employer's safety department can tell you what training and certification are required. Do not assume you can operate it yourself without training—it is a skilled task and operating an uncertified forklift is illegal in most workplaces.

What is the difference between a forklift and a telehandler?

A forklift has fixed forks that lift straight up and down. A telehandler (or boom lift) has an extending arm that can reach forward and upward, useful for placing loads on high shelves or into trucks. Telehandlers cost more and require different training. Choose based on what you actually need to do—if you just need to stack pallets, a forklift is simpler and cheaper.

Should I buy new or used?

A new forklift comes with a full warranty and no hidden problems, but costs significantly more. A used forklift costs less upfront but may need repairs sooner. If you will use it heavily every day, a new or certified refurbished machine may be worth the extra cost because downtime is expensive. If you use it occasionally or for a short-term project, used is usually the better choice financially.

Can I return a forklift if something is wrong with it?

Return policies depend on where you buy. Dealers often offer a short return window (30 to 90 days) if the machine does not work as described. Private sales are almost never returnable—you own it as-is. Auction purchases are final. Read the terms before you buy, and if there is no written return policy, assume there is none.