What a Delco Remy cross reference does and why you need one
A Delco Remy cross reference is a tool that matches a part number from one manufacturer to the equivalent Delco Remy part. When you have an old alternator, starter, or generator with a number stamped on it—but you don't know what Delco Remy calls that same part—a cross reference tells you the matching part number to order.
You need this because vehicles use parts from multiple suppliers over their lifetime. A 1970s Chevrolet alternator might carry a number from Motorola or Prestolite on the case, but the Delco Remy equivalent is what you'll find in current catalogs and what most rebuilders stock. Without the cross reference, you're ordering blind or paying a shop to look it up for you.
The cross reference works in both directions: from a non-Delco number to Delco Remy, or from a Delco Remy number to what other manufacturers called the same part. This matters because some shops and salvage yards organize inventory by the original equipment manufacturer rather than by Delco Remy's naming system.
Key Takeaways
- Delco Remy cross references match part numbers across manufacturers so you can order the correct alternator, starter, or generator without guessing.
- The part number is usually stamped on the case of the component itself, and you read it directly from the unit before looking it up.
- Online cross reference databases, parts catalogs, and rebuilder websites all maintain searchable cross reference tables for free.
- If a cross reference shows multiple Delco Remy numbers for one original part, the difference is usually in voltage or amperage rating, not physical fit.
- Rebuilders and core exchanges often require the exact Delco Remy number to process a core return, so getting the cross reference right saves time and money.
Where to find the part number on your alternator, starter, or generator
The manufacturer's part number is stamped, cast, or labeled directly onto the housing of the component. For an alternator, look on the case near the mounting ears or on the rear cover. For a starter, check the solenoid housing and the main body. For a generator, the number is typically on the frame or pole shoe area.
Write down the entire number exactly as it appears, including any letters or dashes. A number like 1100941 or 1102496 is typical for Delco Remy units. If the part is from another maker, you might see a number like ALT-5000 or STR-2847. Take a photo with your phone if the stamping is hard to read—you'll have a record to reference while searching.
If the number is worn away or illegible, note the vehicle year, make, model, and engine size instead. You can then search for what Delco Remy part was original equipment for that vehicle, which is often faster than trying to decode a partial number.
Using online cross reference databases
Several free online databases let you search a part number and see what it matches across manufacturers. RockAuto, AutoZone, and O'Reilly Auto Parts all have cross reference tools built into their websites. Enter the number you found on your part, select the component type (alternator, starter, or generator), and the database returns matching part numbers from other manufacturers and from Delco Remy.
Delco Remy's own website maintains a cross reference tool at delcoremy.com, though it is less user-friendly than third-party sites. You enter your part number and it returns Delco Remy equivalents. The advantage is that you're getting information directly from the manufacturer, so there is no guessing about accuracy.
When you search, pay attention to the voltage and amperage listed alongside each match. A 12-volt, 55-amp alternator is not interchangeable with a 12-volt, 100-amp unit, even if they have the same physical mounting. The cross reference will show both, but you need the one that matches your vehicle's electrical system.
Cross references from rebuilders and core exchanges
Alternator and starter rebuilders maintain their own cross reference databases because they buy cores from salvage yards, estate sales, and used parts suppliers. Companies like Remy International (the current owner of the Delco Remy brand) and independent rebuilders like Leece-Neville rebuilders publish cross reference charts on their websites or in printed catalogs.
If you plan to rebuild your part rather than replace it, contact a local rebuilder with your part number. They can tell you when ready whether they stock a core, what the Delco Remy equivalent is, and what the rebuild will cost. Many rebuilders also offer a core exchange, meaning they credit you for your old unit when you buy the rebuilt one—but they need the exact Delco Remy number to process the exchange.
Rebuilders are especially useful if your part number is obscure or from a foreign manufacturer. They've seen thousands of units and can often identify a part by description alone if the number is missing or illegible.
Understanding what the cross reference tells you
When a cross reference shows that your part number matches multiple Delco Remy numbers, the difference is almost always in electrical output (voltage and amperage) or in the mounting configuration. A Motorola alternator numbered 8AL2048 might cross to both Delco Remy 1100941 and 1102496—one is 55 amps, the other is 63 amps. You need to know which one your vehicle originally had to order the right replacement.
Check your vehicle's original equipment specification in the owner's manual or service manual. If you can't find that, call a dealer parts department with your vehicle identification number (VIN) and ask what alternator or starter was original equipment. They'll give you the Delco Remy number directly, which saves you from having to interpret the cross reference.
Some cross references also show physical differences like pulley diameter, stud size, or connector type. These matter for installation. A part that electrically matches but has a different pulley diameter won't fit your serpentine belt, and a part with the wrong connector won't plug into your wiring harness.
When a cross reference doesn't match what you expected
If you search a part number and get no results, the number may be incomplete, misread, or from a component that isn't an alternator, starter, or generator. Double-check the number against your photo and try again. If it still doesn't match, try searching by vehicle year and model instead—this tells you what Delco Remy part was original equipment, which is often the part you actually need.
If the cross reference shows a match but the physical dimensions don't seem right, contact the rebuilder or parts supplier directly. Cross reference databases are usually accurate, but errors happen. A phone call to someone who handles these parts daily is faster than ordering the wrong unit and discovering the problem on installation day.
Some very old parts—especially those from the 1950s and 1960s—may not appear in modern cross reference databases because they're no longer in production. In that case, a specialty rebuilder who works on vintage vehicles is your best resource. They maintain historical cross references and can often source or rebuild obsolete units.
Frequently Asked Questions
Can I use a cross reference to order a part online without talking to anyone?
Yes, if the cross reference clearly shows the Delco Remy number and you've confirmed the voltage and amperage match your vehicle. But if you're uncertain about the output rating or physical fit, a quick call to the parts supplier or rebuilder costs nothing and prevents ordering the wrong unit.
What if my part number has letters and numbers mixed together?
Enter it exactly as it appears, including all letters and dashes. Some manufacturers use letter prefixes to indicate the type of component or the year it was made. The cross reference database will recognize the full number and return matches.
Do I need the cross reference if I'm buying a new alternator or starter?
Not necessarily. If you're buying new from a parts store, you can search by vehicle year, make, and model, and the store will show you what fits. The cross reference is most useful when you have an old part you want to rebuild, or when you're buying used and need to verify what you're getting.
Will a cross reference tell me if a part is compatible with my vehicle?
No. A cross reference only tells you what manufacturers called the same part. You still need to verify that the voltage, amperage, and mounting match your vehicle's original equipment. Always check your vehicle's manual or call a dealer to confirm before ordering.
Can I cross reference a part number from a salvage yard listing?
Yes. If a salvage yard lists a part by its original manufacturer number, you can use a cross reference to find the Delco Remy equivalent and then search for that number in current parts catalogs to see if it's still available new or rebuilt.