What a Cat track skid steer loader does

A Caterpillar track skid steer loader (often called a Cat skid steer) is a compact construction machine with a rigid frame, two sets of powered tracks instead of wheels, and a hydraulic arm that lifts and moves attachments. Unlike wheeled skid steers, the tracks distribute weight across soft ground without sinking, making them useful on muddy job sites, unpaved terrain, and surfaces that would bog down a wheeled machine. The operator sits in a cab and steers by varying the speed of each track independently—the left track faster than the right makes the machine turn right, and vice versa.

Track skid steers are smaller than full-size excavators or bulldozers but larger and more capable than hand tools. They cost between $40,000 and $80,000 new, depending on the model and attachments, and are commonly rented by the day or week for landscaping, site prep, demolition, and utility work. The tracks themselves are rubber or steel belts that wear out over time and require periodic replacement or repair.

Key Takeaways

  • Cat track skid steers use independent track drive to turn and maneuver on soft or uneven ground where wheeled machines would slip or sink.
  • The hydraulic arm and quick-attach bucket system let you swap between digging, grading, and material-handling tasks on the same machine.
  • Track wear is the most common maintenance cost; rubber tracks last 1,000 to 2,000 hours before needing replacement or repair.
  • Rental is usually cheaper than ownership for short-term projects, but ownership makes sense if you use the machine more than 500 hours per year.
  • Operating a track skid steer requires training to avoid track damage, hydraulic leaks, and overheating in hot weather.

How track drive differs from wheel drive on skid steers

A wheeled skid steer has four rubber tires and works well on hard, dry surfaces like concrete and packed dirt. A track skid steer replaces the tires with continuous rubber or steel belts that grip and distribute the machine's weight across a wider footprint. On soft ground—mud, sand, snow, or newly seeded grass—the tracks sink less and provide better traction because the contact area is larger.

The trade-off is speed and fuel economy. Wheeled skid steers are faster on roads and paved sites and burn less fuel. Track machines are slower, louder, and consume more hydraulic fluid because the tracks require constant power to move. On a muddy construction site or landscaping job, however, the track's ability to work without leaving ruts or getting stuck often outweighs the extra cost and noise.

Attachments and what they cost

The Cat skid steer's hydraulic arm uses a quick-attach plate that lets you swap buckets, forks, augers, and other tools without leaving the cab. A standard digging bucket costs $500 to $1,500 new. A grapple (for grabbing brush or debris) runs $2,000 to $4,000. Augers for drilling post holes, snow blowers, and material forks each fall in the $1,500 to $3,000 range. Rental shops usually charge $50 to $150 per day for each attachment on top of the machine rental.

If you own the machine, buying two or three common attachments makes sense. If you rent, ask the rental shop which attachments are included and which cost extra. Some shops bundle a bucket and forks; others charge separately for each.

Track wear, replacement, and repair costs

The rubber tracks on a Cat skid steer wear out faster than tires because they flex constantly and absorb impact from rocks and roots. A set of replacement tracks costs $3,000 to $6,000 depending on the model and whether you choose rubber or steel. Rubber tracks last 1,000 to 2,000 operating hours; steel tracks last longer but are noisier and damage pavement.

Track repair—patching a puncture or replacing a broken link—costs $200 to $800 and can often be done in a day. If you own the machine, budget for track replacement every two to three years if you use it regularly. Rental shops absorb this cost, which is why renting is cheaper for occasional users. If a track breaks during a rental, you typically pay a damage fee of $500 to $2,000 depending on the shop's policy.

To extend track life, avoid sharp rocks, metal debris, and running the machine on concrete or asphalt. Inspect the tracks weekly for cracks, missing links, or debris wrapped around the rollers. Clean mud and stones out of the track after each use.

Maintenance and operating costs

A Cat track skid steer needs an oil change every 250 to 500 hours, a hydraulic filter change every 500 hours, and air filter replacement every 1,000 hours. Oil changes cost $150 to $300; filter changes run $100 to $200 each. Fuel consumption is roughly 1 gallon per hour of operation, so a full day of work (8 hours) costs $30 to $50 in fuel depending on local diesel prices.

The hydraulic system is the machine's most expensive component. A hydraulic hose leak or cylinder failure can cost $500 to $2,000 to repair. Overheating is common in hot weather or when the machine is worked hard without breaks; the engine shuts down automatically to prevent damage, but this stops work and signals a maintenance problem. Keep the radiator clean and never block the cooling fan.

Rental shops handle all maintenance, so your only cost is the daily or weekly rental fee plus fuel (which you may or may not pay depending on the contract). Ownership makes financial sense if you use the machine more than 500 hours per year; below that, renting is usually cheaper.

Renting versus buying a Cat track skid steer

Daily rental for a Cat track skid steer ranges from $150 to $300 depending on the model and your location. Weekly rates are usually 3 to 4 times the daily rate, so a week costs $450 to $1,000. Monthly rates are 10 to 15 times the daily rate. A new Cat skid steer costs $50,000 to $80,000; used models in good condition run $25,000 to $50,000.

If you need the machine for a one- or two-week project, renting is almost always cheaper. If you have ongoing work—landscaping, site prep, or demolition—and use the machine 10 or more hours per week, ownership becomes competitive. Factor in insurance ($1,000 to $2,000 per year), storage, and the cost of repairs and track replacement. A spreadsheet comparing your expected hours per year against rental rates will show whether buying makes sense for your situation.

Common operating mistakes that damage the machine

Overloading the bucket is the most common mistake. The machine's hydraulic system has a rated lift capacity (usually 4,000 to 5,500 pounds depending on the model). Exceeding it strains the cylinders and pump, leading to leaks and failure. Never fill the bucket past the top edge, and avoid lifting heavy loads at full arm extension.

Turning too sharply or too fast on slopes causes the machine to tip. Track skid steers are stable on flat ground but tip more easily than wheeled machines on slopes. Always turn slowly on a grade and avoid crossing slopes at an angle. Spinning the tracks in place (doing a donut) wears them out quickly and can break the drive system.

Leaving the machine idling in the sun without shade causes the hydraulic fluid to overheat. If the engine shuts down due to high temperature, let it cool for 15 minutes before restarting. Running the machine in deep water or mud can flood the engine air intake or hydraulic breather, causing internal damage. Stay out of water deeper than the track height.

Frequently Asked Questions

Can I operate a Cat track skid steer without training?

No. Most rental shops require proof of training or experience, and many require you to watch a 30-minute safety video before taking the machine. If you have never operated one, ask the rental shop for a brief hands-on walkthrough. The controls are intuitive—two joysticks for track speed and arm movement—but learning to turn smoothly and avoid tipping takes practice.

What's the difference between rubber and steel tracks?

Rubber tracks grip better on soft ground and are quieter. Steel tracks are more durable and handle sharp rocks better, but they damage pavement and are louder. For landscaping and site prep, rubber is standard. Steel is used on demolition sites where durability matters more than noise.

How much fuel does a Cat track skid steer use?

Roughly 1 gallon of diesel per hour of operation. A full 8-hour day costs $30 to $50 in fuel depending on local diesel prices. Rental shops sometimes include fuel in the daily rate; always ask before signing the contract.

What happens if I damage the tracks during a rental?

You pay a damage fee, usually $500 to $2,000 depending on the severity and the shop's policy. Small punctures or a broken link may be covered under normal wear; a severely torn track or broken drive system is your responsibility. Read the rental agreement carefully and ask what damage is covered.

Is a track skid steer better than a wheeled one for my job?

Tracks are better on soft, muddy, or uneven ground. Wheels are better on hard surfaces, roads, and sites where speed matters. If your site is mostly dry and packed, a wheeled machine is cheaper to rent and faster. If it's muddy or newly graded, tracks will save you time and prevent ruts.